View versions and download the latest RET controller software and firmware, quickly access installation information, and download operation guidelines. Following the software information, customers can download antenna definition files that are required
for RET controllers to achieve accurate configurations and communication with antennas in an RET system.
If you have questions, Andrew Customer Support Center is available 24 hours a day, 7 days a week to assist with all technical related inquiries for Andrew Teletilt® products.
USA Toll Free Call:
+1-800-255-1479, Option 1
+1-779-435-6500, Option 1
The ATC200-LITE-USB controller software automatically determines the Teletilt actuator version and applies the firmware update for each actuator found on the AISG bus.
To update actuator firmware using the ATC200-LITE-USB controller:
ATCLite v8.0 Software
The E-ATM300 Field Configuration Tool is required for applications where E-ATM300 actuators will be managed using an ATC200-LITE-USB controller.
The PWR-COBRA-1 Software is required for applications where COBRAactuators will be managed using an ATC200-LITE-USB controller.
ATC200-1000 Teletilt Rack Mount Controller
ATC300-1000 Teletilt Rack Mount Controller
PWR-COBRA-1 COBRA Portable Controller
Please notice that the PWR-COBRA-1 portable controller has been discontinued and replaced by the ATC200-LITE-USB Teletilt portable controller. In order to control COBRA actuators, please use the PWR-COBRA software with either the PWR-COBRA-1 or the ATC200-LITE-USB
Antenna definition files are required for RET controllers to achieve accurate configurations and communication with antennas in a RET system. This file tells the RET system the tilt range for a given antenna and enables the system to set the tilt angle for the antenna. Andrew Solutions provides the most up-to-date antenna definition files for Andrew RET compatible antennas to be managed in the RET systems shown below. It is highly important to download and use the latest Andrew antenna definition file
to ensure quality electrical tilt adjustment results.
PLEASE NOTE: The antenna definition file is included with download bundles for Andrew rack mount controllers.
The latest antenna definition file version is 057, as of 9/6/2013.
Using Teletilt® RET Actuators with OEM Base Station Embedded Controllers
Design / Training ToolsDesign Training Tools are provided [FOR DEMONSTRATION PURPOSES] AND "AS IS," AND COMMSCOPE MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED AND SPECIFICALLY DISCLAIMS AND EXCLUDES ANY REPRESENTATION OR WARRANTY OF MERCHANTABILITY, NONINFRINGEMENT
OR FITNESS FOR A PARTICULAR PURPOSE AND ANY REPRESENTATION ARISING BY USAGE OF TRADE, COURSE OF DEALING OR COURSE OF PERFORMANCE. CommScope is under no obligation to issue any upgrades, update specifications or notify customers/Users of this design training
tool that changes have been made to the design Training tool. The user of this design training tool assumes all risks associated with any use of this Design training tool.
These configurators are provided for guidance purposes only and should not be used or in any way relied upon without consultation with and supervision of experienced construction personnel and a local CommScope representative. CommScope makes no representations
or warranties of any kind, express or implied, including any representation or warranty regarding the quality, content, completeness, suitability, adequacy or accuracy of the data contained therein. The user of these configurators assumes all risks associated
with such use, and CommScope hereby disclaims any and all liability for damages of any kind resulting from such use.
In the News
© 2013 CommScope Inc.