View versions and download the latest Andrew Solutions RET controller software and firmware available. Also, a quick resource to installation/operation guides and more.
Please note that the ATC200-LITE-USB controller software automatically determines the Teletilt actuator version and applies the firmware update for each actuator found on the AISG bus.
In order to update actuator firmware using the ATC200-LITE-USB controller:
Connect the ATC200-LITE-USB controller to an actuator.
Start up the latest version ATC-LITE software.
Execute a device scan.
The actuator version is automatically detected and latest firmware is applied.
Please notice that the PWR-COBRA-1 portable controller has been discontinued and replaced by the ATC200-LITE-USB Teletilt portable controller. In order to control COBRA actuators, please use the PWR-COBRA software with either the PWR-COBRA-1 or the ATC200-LITE-USB portable controller.
Antenna definition files are required for RET controllers to achieve accurate configurations and communication with antennas in a RET system. This file tells the RET system the tilt range for a given antenna and enables the system to set the tilt angle for the antenna. Andrew Solutions provides the most up-to-date antenna definition files for Andrew RET compatible antennas to be managed in the RET systems shown below. It is highly important to download and use the latest Andrew antenna definition file to ensure quality electrical tilt adjustment results.
PLEASE NOTE: The antenna definition file is included with download bundles for Andrew rack mount controllers.
The latest antenna definition file version is 056, as of 5/13/2013.
Andrew For using Andrew Teletilt® ATC200-LITE-USB controller with Andrew RET capable antennas
Andrew Self-Extracting File Self-extracting file for using Andrew Teletilt® ATC200-LITE-USB controller with Andrew RET capable antennas
Ericsson For using a Ericsson controller with Andrew RET capable antennas
Huawei For using a Huawei controller with Andrew RET capable antennas
Kathrein For using a Kathrein controller with Andrew RET capable antennas
Nokia RealTilt For using Nokia RealTilt (AISG 1.1) controller with Andrew RET capable antennas (If an antenna cannot be found in this file, please contact Andrew at Teletilt@Andrew.com).
Andrew Solutions Teletilt® Site Configuration Worksheet
Andrew Solutions offers, and highly recommends, the use of our Teletilt Site Configuration Worksheet to record key antenna/actuator site installation information. For your convenience, this worksheet is now downloadable in either PDF or Word formats.