SnapStak™ Stackable Snap-in Hangers
No more worries about fumbling with hardware or losing small parts—because there aren’t any!

New antenna systems can now be added to crowded multiple-tenant towers—with minimal space! SnapStak snap-in hangers can be stacked up to three deep when using 1/2 in and 7/8 in coaxial cable, or two deep when using 1-1/4 in and 1-5/8 in coaxial cable. Each hanger accommodates one run of HELIAX® cable.

The distinctive, self-contained design of the SnapStak stackable snap-in hanger eliminates the need for mounting hardware and installation tools. This simplifies coaxial cable installations, lowering both time and cost.

Retention tabs on the spring fork make SnapStak hangers highly resistant to pop-out, so installations are robust and secure. Yet, specially designed to dampen vibrations, SnapStak hangers do not have a rigid hold on the tower, so motion caused by wind is simply absorbed. This reduces movement down the coaxial cable, greatly reducing stress on the connections at the jumper cable, antenna, or device.

SnapStak hangers can be mounted directly to the tower support system, or used in conjunction with a variety of mounting accessories for rooftops, buildings, and water towers. The SnapStak hanger installs in 3/4 in holes in support structures 1/8 in (0.120 in to 0.150 in) thick. The stainless steel construction of the SnapStak snap-in hanger provides exceptional integrity, even in highly corrosive environments and extreme weather conditions. Compact installations save tower space. And maintenance is easy, since SnapStak stackable snap-in hangers are self sufficient—no hardware required for installation! Mounts to pre-punched 3/4 in (19 mm) holes, kit of 10.

Click-On Hangers
Install Cable with One Easy “Click”

Specifically designed to support HELIAX® coaxial cable, stackable click-on hangers install in just minutes and provide a perfect fit that gives your PCS/PCN, cellular, microwave, rural telephony, GSM, or other telecommunications system a professional appearance, especially in confined spaces.

Available in either single or double versions, click-on hangers are manufactured of tough UV-resistant material and set the standard for durability, simplicity of installation, and cost effectiveness.

Standard and Snap-in Hangers
Attachment with No Hardware!

The Andrew Solutions Snap-In hangers provide quick and easy attachment in all types of weather. The hangers snap directly into holes in the tower support members. Installation time and costs are substantially reduced. These hangers feature cable gripping tabs to prevent cable slippage, and are constructed of heavy gauge stainless steel for high strength and excellent corrosion resistance. Waveguide versions include a heavy UV resistant rubber insert to secure the elliptical waveguide.