SBNHH-1D65B
Andrew® Tri-band Antenna, 698–896 and 2 x 1710–2360 MHz, 65° horizontal beamwidth, internal RET. Both high bands share the same electrical tilt.
  • Interleaved dipole technology providing for attractive, low wind load mechanical package
  • The values presented on this datasheet have been calculated based on N-P-BASTA White Paper version 9.6 by the NGMN Alliance
Electrical Specifications
Frequency Band, MHz698–806806–8961710–18801850–19901920–21802300–2360
Gain by all Beam Tilts, average, dBi14.514.317.417.918.218.3
Gain by all Beam Tilts Tolerance, dB±0.5±0.8±0.4±0.3±0.5±0.3
Gain by Beam Tilt, average, dBi
0 ° | 14.6
 7 ° | 14.6
 14 ° | 14.2
0 ° | 14.5
 7 ° | 14.4
 14 ° | 13.6
0 ° | 17.4
 3 ° | 17.5
 7 ° | 17.4
0 ° | 17.8
 3 ° | 17.9
 7 ° | 17.9
0 ° | 18.1
 3 ° | 18.3
 7 ° | 18.2
0 ° | 18.2
 3 ° | 18.4
 7 ° | 18.4
Beamwidth, Horizontal, degrees686669666358
Beamwidth, Horizontal Tolerance, degrees±2.2±3.4±2±4.6±5.7±4.3
Beamwidth, Vertical, degrees12.110.75.65.25.04.5
Beamwidth, Vertical Tolerance, degrees±0.8±1±0.3±0.2±0.3±0.2
Beam Tilt, degrees0–140–140–70–70–70–7
USLS, dB161416161615
Front-to-Back Total Power at 180° ± 30°, dB252627262626
CPR at Boresight, dB222321202022
CPR at Sector, dB13111612114
Isolation, dB252525252525
Isolation, Intersystem, dB303030303030
VSWR | Return Loss, dB1.5 | 14.01.5 | 14.01.5 | 14.01.5 | 14.01.5 | 14.01.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc-153-153-153-153-153-153
Input Power per Port, maximum, watts350350350350350300
Polarization  ±45°±45°±45°±45°±45°±45°
Impedance  50 ohm50 ohm50 ohm50 ohm50 ohm50 ohm
General Specifications  
Antenna Brand   Andrew®
Antenna Type   DualPol® multiband with internal RET
Band   Multiband
Brand   DualPol®   |   Teletilt®
Operating Frequency Band   1710 – 2360 MHz   |   698 – 896 MHz
   
Mechanical Specifications  
Color   Light gray
Lightning Protection   dc Ground
Radiator Material   Aluminum   |   Low loss circuit board
Radome Material   Fiberglass, UV resistant
RF Connector Interface   7-16 DIN Female
RF Connector Location   Bottom
RF Connector Quantity, total   6
Wind Loading, maximum   617.7 N @ 150 km/h
138.9 lbf @ 150 km/h
Wind Speed, maximum   241.4 km/h   |   150.0 mph
   
Dimensions  
Depth   181.0 mm   |   7.1 in
Length   1828.0 mm   |   72.0 in
Width   301.0 mm   |   11.9 in
Net Weight   18.4 kg   |   40.6 lb
   
Remote Electrical Tilt (RET) Information  
Annual Failure Rate, maximum   0.01%
Input Voltage   10–30 Vdc
Power Consumption, idle state, maximum   2.0 W
Power Consumption, normal conditions, maximum   11.0 W
Protocol   3GPP/AISG 2.0 Multi-RET
RET Interface   RS-485 Female (daisy chain port ,1)   |   RS-485 Male (input port, 1)
RET Interface, quantity   1 female   |   1 male
RET System   Teletilt®
Regulatory Compliance/Certifications
AgencyClassification
RoHS 2011/65/EUCompliant by Exemption
China RoHS SJ/T 11364-2006Above Maximum Concentration Value (MCV)
ISO 9001:2008Designed, manufactured and/or distributed under this quality management system


Included Products
BSAMNT-1
Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Horizontal Pattern Vertical Pattern


©2014 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: June 27, 2014
July 24, 2014