SBNHH-1D65C

Multiband Antenna, 698–896 and 2x 1695–2360 MHz, 65° horizontal beamwidth, internal RET. Both high bands share the same electrical tilt.

  • Interleaved dipole technology providing for attractive, low wind load mechanical package
Specifications

Electrical Specifications
Frequency Band, MHz698–806806–8961695–18801850–19901920–22002300–2360
Gain, dBi16.216.017.717.918.518.5
Beamwidth, Horizontal, degrees666470656358
Beamwidth, Vertical, degrees8.97.85.75.25.04.4
Beam Tilt, degrees0–110–110–70–70–70–7
USLS (First Lobe), dB111215151514
Front-to-Back Ratio at 180°, dB293127272827
Isolation, dB252525252525
Isolation, Intersystem, dB303030303030
VSWR | Return Loss, dB1.5 | 14.01.5 | 14.01.5 | 14.01.5 | 14.01.5 | 14.01.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc-153-153-153-153-153-153
Input Power per Port, maximum, watts400400350350350300
Polarization±45°±45°±45°±45°±45°±45°
Impedance50 ohm50 ohm50 ohm50 ohm50 ohm50 ohm

Electrical Specifications, BASTA*
Frequency Band, MHz698–806806–8961695–18801850–19901920–22002300–2360
Gain by all Beam Tilts, average, dBi15.815.617.317.818.218.1
Gain by all Beam Tilts Tolerance, dB±0.4±0.5±0.3±0.2±0.5±0.4
Gain by Beam Tilt, average, dBi
0 ° | 16.0
 5 ° | 16.0
 11 ° | 15.5
0 ° | 15.8
 5 ° | 15.8
 11 ° | 15.2
0 ° | 17.3
 4 ° | 17.4
 7 ° | 17.3
0 ° | 17.7
 4 ° | 17.8
 7 ° | 17.7
0 ° | 18.0
 4 ° | 18.2
 7 ° | 18.1
0 ° | 17.9
 4 ° | 18.2
 7 ° | 18.2
Beamwidth, Horizontal Tolerance, degrees±1.2±1.9±3.4±3.8±4.7±3.7
Beamwidth, Vertical Tolerance, degrees±0.6±0.5±0.3±0.2±0.3±0.2
USLS, beampeak to 20° above beampeak, dB 131417161715
Front-to-Back Total Power at 180° ± 30°, dB 262427252526
CPR at Boresight, dB 292220211921
CPR at Sector, dB 1411131195
Array Layout  
Click on image below to enlarge.
   
General Specifications  
Operating Frequency Band   1695 – 2360 MHz   |   698 – 896 MHz
Antenna Type   Sector
Band   Multiband
Performance Note Outdoor usage
   
Mechanical Specifications  
RF Connector Quantity, total   6
RF Connector Quantity, low band   2
RF Connector Quantity, high band   4
RF Connector Interface   7-16 DIN Female
Color   Light gray
Grounding Type   RF connector inner conductor and body grounded to reflector and mounting bracket
Radiator Material   Aluminum   |   Low loss circuit board
Radome Material   Fiberglass, UV resistant
Reflector Material   Aluminum
RF Connector Location   Bottom
Wind Loading, frontal   879.0 N @ 150 km/h
197.6 lbf @ 150 km/h
Wind Loading, lateral   273.0 N @ 150 km/h
61.4 lbf @ 150 km/h
Wind Loading, rear   1033.0 N @ 150 km/h
232.2 lbf @ 150 km/h
Wind Speed, maximum   241 km/h   |   150 mph
   
Dimensions  
Length   2453.0 mm   |   96.6 in
Width   301.0 mm   |   11.9 in
Depth   180.0 mm   |   7.1 in
Net Weight, without mounting kit   22.5 kg   |   49.6 lb
   
Remote Electrical Tilt (RET) Information  
Input Voltage   10–30 Vdc
Internal RET   High band (1)   |   Low band (1)
Power Consumption, idle state, maximum   2.0 W
Power Consumption, normal conditions, maximum   13.0 W
Protocol   3GPP/AISG 2.0 (Multi-RET)
RET Interface   8-pin DIN Female   |   8-pin DIN Male
RET Interface, quantity   1 female   |   1 male
   
Packed Dimensions  
Length   2628.0 mm   |   103.5 in
Width   390.0 mm   |   15.4 in
Depth   296.0 mm   |   11.7 in
Shipping Weight   35.2 kg   |   77.6 lb
Regulatory Compliance/Certifications
AgencyClassification
RoHS 2011/65/EUCompliant by Exemption
China RoHS SJ/T 11364-2006Above Maximum Concentration Value (MCV)
ISO 9001:2008Designed, manufactured and/or distributed under this quality management system

Logo Logo
Included Parts

BSAMNT-1
Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Related Products

 

40 Years of Network Innovation

Celebrate the people and innovations who have shaped the communications industry and are leading the way forward.

Learn More