FVV-65C-R3
6-port sector antenna, 2x 617-894 and 4x 1695–2690 MHz, 65° HPBW, 3x RET, 600 MHz-Ready Antenna Technology
Specifications
General Specifications
| Antenna Type | Sector |
| Band | Multiband |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Low loss circuit board |
| Reflector Material | Aluminum |
| RF Connector Interface | 4.3-10 Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 4 |
| RF Connector Quantity, low band | 2 |
| RF Connector Quantity, total | 6 |
Remote Electrical Tilt (RET) Information
| RET Hardware | CommRET v1 |
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 1 female | 1 male |
| Input Voltage | 10–30 Vdc |
| Internal RET | High band (2) | Low band (1) |
| Power Consumption, idle state, maximum | 1 W |
| Power Consumption, normal conditions, maximum | 8 W |
| Protocol | 3GPP/AISG 2.0 (Single RET) |
Dimensions
| Width | 301 mm | 11.85 in |
| Depth | 181 mm | 7.126 in |
| Length | 2451 mm | 96.496 in |
| Net Weight, without mounting kit | 24.4 kg | 53.793 lb |
Array Layout
| Click on image to enlarge. |
Port Configuration
| Click on image to enlarge. |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 617 – 894 MHz | 1695 – 2690 MHz |
| Polarization | ±45° |
| Total Input Power, maximum | 900 W @ 50 °C |
Electrical Specifications
| Frequency Band, MHz | 617–698 | 698–894 | 1695–1880 | 1850–1990 | 1920–2200 | 2300–2500 | 2500–2690 |
| Gain, dBi | 15.4 | 15.8 | 17.5 | 18.1 | 18.6 | 19.1 | 19.2 |
| Beamwidth, Horizontal, degrees | 71 | 69 | 66 | 66 | 65 | 61 | 57 |
| Beamwidth, Vertical, degrees | 10.3 | 8.7 | 5.6 | 5.3 | 4.9 | 4.4 | 4.1 |
| Beam Tilt, degrees | 2–12 | 2–12 | 2–12 | 2–12 | 2–12 | 2–12 | 2–12 |
| USLS (First Lobe), dB | 23 | 20 | 16 | 17 | 17 | 18 | 20 |
| Front-to-Back Ratio at 180°, dB | 26 | 28 | 37 | 35 | 32 | 28 | 31 |
| Isolation, Cross Polarization, dB | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Isolation, Inter-band, dB | 28 | 28 | 28 | 28 | 28 | 28 | 28 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -150 | -150 | -150 | -150 | -150 | -150 | -150 |
| Input Power per Port at 50°C, maximum, watts | 250 | 250 | 200 | 200 | 200 | 200 | 200 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 617–698 | 698–894 | 1695–1880 | 1850–1990 | 1920–2200 | 2300–2500 | 2500–2690 |
| Gain by all Beam Tilts, average, dBi | 15.2 | 15.5 | 17.0 | 17.6 | 18.1 | 18.7 | 18.8 |
| Gain by all Beam Tilts Tolerance, dB | ±0.3 | ±0.5 | ±0.7 | ±0.6 | ±0.6 | ±0.5 | ±0.6 |
| Gain by Beam Tilt, average, dBi | 2 ° | 14.9 7 ° | 15.212 ° | 15.2 | 2 ° | 15.1 7 ° | 15.612 ° | 15.4 | 2 ° | 16.9 7 ° | 17.112 ° | 16.9 | 2 ° | 17.3 7 ° | 17.712 ° | 17.7 | 2 ° | 17.7 7 ° | 18.112 ° | 18.1 | 2 ° | 18.5 7 ° | 18.812 ° | 18.4 | 2 ° | 18.5 7 ° | 19.012 ° | 18.7 |
| Beamwidth, Horizontal Tolerance, degrees | ±1.9 | ±2.9 | ±4.1 | ±3.7 | ±3.6 | ±7.4 | ±7.3 |
| Beamwidth, Vertical Tolerance, degrees | ±0.6 | ±1.1 | ±0.4 | ±0.2 | ±0.4 | ±0.2 | ±0.2 |
| USLS, beampeak to 20° above beampeak, dB | 21 | 15 | 15 | 16 | 16 | 17 | 13 |
| Front-to-Back Total Power at 180° ± 30°, dB | 22 | 23 | 24 | 25 | 25 | 24 | 25 |
| CPR at Boresight, dB | 17 | 16 | 16 | 16 | 17 | 17 | 16 |
| CPR at Sector, dB | 10 | 11 | 7 | 7 | 7 | 6 | 4 |
Mechanical Specifications
| Mechanical Tilt Range | 0°–12° |
| Wind Loading @ Velocity, frontal | 396.0 N @ 150 km/h (89.0 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 332.0 N @ 150 km/h (74.6 lbf @ 150 km/h) |
| Wind Loading @ Velocity, maximum | 761.0 N @ 150 km/h (171.1 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 401.0 N @ 150 km/h (90.1 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 380 mm | 14.961 in |
| Depth, packed | 295 mm | 11.614 in |
| Length, packed | 2571 mm | 101.221 in |
| Weight, gross | 36.8 kg | 81.130 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant/Exempted |
CHINA-ROHS
|
Above maximum concentration value |
| UK-ROHS | Compliant/Exempted |
General Specifications
| Antenna Type | Sector |
| Band | Multiband |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Low loss circuit board |
| Reflector Material | Aluminum |
| RF Connector Interface | 4.3-10 Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 4 |
| RF Connector Quantity, low band | 2 |
| RF Connector Quantity, total | 6 |
Remote Electrical Tilt (RET) Information
| RET Hardware | CommRET v1 |
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 1 female | 1 male |
| Input Voltage | 10–30 Vdc |
| Internal RET | High band (2) | Low band (1) |
| Power Consumption, idle state, maximum | 1 W |
| Power Consumption, normal conditions, maximum | 8 W |
| Protocol | 3GPP/AISG 2.0 (Single RET) |
Dimensions
| Width | 301 mm | 11.85 in |
| Depth | 181 mm | 7.126 in |
| Length | 2451 mm | 96.496 in |
| Net Weight, without mounting kit | 24.4 kg | 53.793 lb |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 617 – 894 MHz | 1695 – 2690 MHz |
| Polarization | ±45° |
| Total Input Power, maximum | 900 W @ 50 °C |
Electrical Specifications
| Frequency Band, MHz | 617–698 | 698–894 | 1695–1880 | 1850–1990 | 1920–2200 | 2300–2500 | 2500–2690 |
| Gain, dBi | 15.4 | 15.8 | 17.5 | 18.1 | 18.6 | 19.1 | 19.2 |
| Beamwidth, Horizontal, degrees | 71 | 69 | 66 | 66 | 65 | 61 | 57 |
| Beamwidth, Vertical, degrees | 10.3 | 8.7 | 5.6 | 5.3 | 4.9 | 4.4 | 4.1 |
| Beam Tilt, degrees | 2–12 | 2–12 | 2–12 | 2–12 | 2–12 | 2–12 | 2–12 |
| USLS (First Lobe), dB | 23 | 20 | 16 | 17 | 17 | 18 | 20 |
| Front-to-Back Ratio at 180°, dB | 26 | 28 | 37 | 35 | 32 | 28 | 31 |
| Isolation, Cross Polarization, dB | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Isolation, Inter-band, dB | 28 | 28 | 28 | 28 | 28 | 28 | 28 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -150 | -150 | -150 | -150 | -150 | -150 | -150 |
| Input Power per Port at 50°C, maximum, watts | 250 | 250 | 200 | 200 | 200 | 200 | 200 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 617–698 | 698–894 | 1695–1880 | 1850–1990 | 1920–2200 | 2300–2500 | 2500–2690 |
| Gain by all Beam Tilts, average, dBi | 15.2 | 15.5 | 17.0 | 17.6 | 18.1 | 18.7 | 18.8 |
| Gain by all Beam Tilts Tolerance, dB | ±0.3 | ±0.5 | ±0.7 | ±0.6 | ±0.6 | ±0.5 | ±0.6 |
| Gain by Beam Tilt, average, dBi | 2 ° | 14.9; 7 ° | 15.2;12 ° | 15.2 | 2 ° | 15.1; 7 ° | 15.6;12 ° | 15.4 | 2 ° | 16.9; 7 ° | 17.1;12 ° | 16.9 | 2 ° | 17.3; 7 ° | 17.7;12 ° | 17.7 | 2 ° | 17.7; 7 ° | 18.1;12 ° | 18.1 | 2 ° | 18.5; 7 ° | 18.8;12 ° | 18.4 | 2 ° | 18.5; 7 ° | 19.0;12 ° | 18.7 |
| Beamwidth, Horizontal Tolerance, degrees | ±1.9 | ±2.9 | ±4.1 | ±3.7 | ±3.6 | ±7.4 | ±7.3 |
| Beamwidth, Vertical Tolerance, degrees | ±0.6 | ±1.1 | ±0.4 | ±0.2 | ±0.4 | ±0.2 | ±0.2 |
| USLS, beampeak to 20° above beampeak, dB | 21 | 15 | 15 | 16 | 16 | 17 | 13 |
| Front-to-Back Total Power at 180° ± 30°, dB | 22 | 23 | 24 | 25 | 25 | 24 | 25 |
| CPR at Boresight, dB | 17 | 16 | 16 | 16 | 17 | 17 | 16 |
| CPR at Sector, dB | 10 | 11 | 7 | 7 | 7 | 6 | 4 |
Mechanical Specifications
| Mechanical Tilt Range | 0°–12° |
| Wind Loading @ Velocity, frontal | 396.0 N @ 150 km/h (89.0 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 332.0 N @ 150 km/h (74.6 lbf @ 150 km/h) |
| Wind Loading @ Velocity, maximum | 761.0 N @ 150 km/h (171.1 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 401.0 N @ 150 km/h (90.1 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 380 mm | 14.961 in |
| Depth, packed | 295 mm | 11.614 in |
| Length, packed | 2571 mm | 101.221 in |
| Weight, gross | 36.8 kg | 81.130 lb |
| Click on image to enlarge. |
| Click on image to enlarge. |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant/Exempted |
|
CHINA-ROHS
|
Above maximum concentration value |
| UK-ROHS | Compliant/Exempted |
Documentation & Downloads
Assembly Drawing
Installation Instruction
Product Information
Product Specification
Warranty
Assembly Drawing
Installation Instruction
Product Compliance Documentation
Product Information
Product Specification
Warranty
Related Products and Accessories
Included Products
Antennas
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Structural Support, Tools & Accessories
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Included Products
Antennas
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Structural Support, Tools & Accessories
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
-
![]()
BSAMNT-3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Other Ways to Browse
