Warning Icon
This product was discontinued on: March 27, 2020

For other alternatives, please contact us for more information.

0 Replacement products available

HBX-4517DS1-VTM | HBX-4517DS1-A1M

2-port sector antenna, 2x 1710–2180 MHz, 45° HPBW, RET compatible. Ideal for high gain corridor coverage or capacity optimization.

Specifications
Finish making your selections or clear them to view relevant specifications.

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material PVC, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 2
RF Connector Quantity, total 2

Remote Electrical Tilt (RET) Information

Model with Factory Installed AISG 2.0 Actuator HBX-4517DS1-A1M

Dimensions

Width 269 mm | 10.591 in
Depth 132 mm | 5.197 in
Length 1464 mm | 57.638 in
Net Weight, without mounting kit 12.3 kg | 27.117 lb

Array Layout

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1710 – 2180 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 1710–1880 1850–1990 1920–2180
Gain, dBi 19.1 19.2 19.6
Beamwidth, Horizontal, degrees 45 45 43
Beamwidth, Vertical, degrees 6.5 6.1 5.8
Beam Tilt, degrees 0–10 0–10 0–10
USLS (First Lobe), dB 17 18 18
Front-to-Back Ratio at 180°, dB 32 32 31
Isolation, Cross Polarization, dB 30 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153
Input Power per Port, maximum, watts 300 300 300

Electrical Specifications, BASTA

Frequency Band, MHz 1710–1880 1850–1990 1920–2180
Gain by all Beam Tilts, average, dBi 18.9 18.9 19.2
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.4 ±0.7
Gain by Beam Tilt, average, dBi 0 ° | 18.8
5 ° | 19.0
10 ° | 18.7
0 ° | 18.7
5 ° | 19.0
10 ° | 18.8
0 ° | 19.2
5 ° | 19.4
10 ° | 18.9
Beamwidth, Horizontal Tolerance, degrees ±1.2 ±1.3 ±3.1
Beamwidth, Vertical Tolerance, degrees ±0.3 ±0.2 ±0.4
USLS, beampeak to 20° above beampeak, dB 14 15 14
Front-to-Back Total Power at 180° ± 30°, dB 30 31 29
CPR at Boresight, dB 24 23 22
CPR at Sector, dB 14 14 14

Mechanical Specifications

Wind Loading @ Velocity, frontal 466.0 N @ 150 km/h (104.8 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 103.0 N @ 150 km/h (23.2 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 506.0 N @ 150 km/h (113.8 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 376 mm | 14.803 in
Depth, packed 267 mm | 10.512 in
Length, packed 1776 mm | 69.921 in
Weight, gross 20.6 kg | 45.415 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material PVC, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 2
RF Connector Quantity, total 2

Remote Electrical Tilt (RET) Information

Model with Factory Installed AISG 2.0 Actuator HBX-4517DS1-A1M

Dimensions

Width 269 mm | 10.591 in
Depth 132 mm | 5.197 in
Length 1464 mm | 57.638 in
Net Weight, without mounting kit 12.3 kg | 27.117 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 1710 – 2180 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 1710–1880 1850–1990 1920–2180
Gain, dBi 19.1 19.2 19.6
Beamwidth, Horizontal, degrees 45 45 43
Beamwidth, Vertical, degrees 6.5 6.1 5.8
Beam Tilt, degrees 0–10 0–10 0–10
USLS (First Lobe), dB 17 18 18
Front-to-Back Ratio at 180°, dB 32 32 31
Isolation, Cross Polarization, dB 30 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153
Input Power per Port, maximum, watts 300 300 300

Electrical Specifications, BASTA

Frequency Band, MHz 1710–1880 1850–1990 1920–2180
Gain by all Beam Tilts, average, dBi 18.9 18.9 19.2
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.4 ±0.7
Gain by Beam Tilt, average, dBi 0 ° | 18.8; 5 ° | 19.0; 10 ° | 18.7 0 ° | 18.7; 5 ° | 19.0; 10 ° | 18.8 0 ° | 19.2; 5 ° | 19.4; 10 ° | 18.9
Beamwidth, Horizontal Tolerance, degrees ±1.2 ±1.3 ±3.1
Beamwidth, Vertical Tolerance, degrees ±0.3 ±0.2 ±0.4
USLS, beampeak to 20° above beampeak, dB 14 15 14
Front-to-Back Total Power at 180° ± 30°, dB 30 31 29
CPR at Boresight, dB 24 23 22
CPR at Sector, dB 14 14 14

Mechanical Specifications

Wind Loading @ Velocity, frontal 466.0 N @ 150 km/h (104.8 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 103.0 N @ 150 km/h (23.2 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 506.0 N @ 150 km/h (113.8 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 376 mm | 14.803 in
Depth, packed 267 mm | 10.512 in
Length, packed 1776 mm | 69.921 in
Weight, gross 20.6 kg | 45.415 lb
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant