This product was discontinued on: March 27, 2020

For other alternatives, please contact us for more information.

1 Replacement products available

RRV4-65D-R6
12-port sector antenna, 4x 694–960 and 8x 1695–2690 MHz, 65° HPBW, 6x RET. Antenna rear wind loading 880N @ 150km/h

CCV4PX310.11R-C3

12-port sector antenna, 4x 790–960 and 8x 1695–2690 MHz, 65° HPBW, 6x RET with manual override. Bands cascaded SRET.

Specifications

Finish making your selections or clear them to view relevant specifications.

Features and Benefits

Integrated Internal Remote Electrical Tilt (RET), with independent control of electrical tilt with manual override on all arrays
All Internal RET actuators are connected in “Cascaded SRET” configuration
Uses the 4.3-10 connector which is 40 percent smaller than the 7-16 DIN connector

Specifications

General Specifications

Antenna Type	Sector
Band	Multiband
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage \| Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material	Fiberglass, UV resistant
Radiator Material	Low loss circuit board
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, high band	8
RF Connector Quantity, low band	4
RF Connector Quantity, total	12

Remote Electrical Tilt (RET) Information

RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	1 female \| 1 male
Input Voltage	10–30 Vdc
Internal RET	High band (4) \| Low band (2)
Power Consumption, idle state, maximum	2 W
Power Consumption, normal conditions, maximum	13 W
Protocol	3GPP/AISG 2.0 (Single RET)

Dimensions

Width	498 mm \| 19.606 in
Depth	197 mm \| 7.756 in
Length	2720 mm \| 107.087 in
Net Weight, without mounting kit	54 kg \| 119.049 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.
Click on image to enlarge.

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	790 – 960 MHz \| 1695 – 2690 MHz
Polarization	±45°

Electrical Specifications

Frequency Band, MHz	790–862	880–960	1695–1880	1850–1990	1920–2180	2300–2500	2500–2690
Gain, dBi	15.8	16.4	16.7	16.8	17.4	18.1	18.1
Beamwidth, Horizontal, degrees	73	62	63	66	67	62	64
Beamwidth, Vertical, degrees	8.9	8.1	7.6	7	6.6	5.5	5.2
Beam Tilt, degrees	0–10	0–10	0–10	0–10	0–10	0–10	0–10
USLS (First Lobe), dB	18	18	18	18	18	18	18
Null Fill, dB	-22	-22	-22	-22	-22	-22	-22
Front-to-Back Ratio at 180°, dB	35	34	33	38	39	39	41
Isolation, Cross Polarization, dB	28	28	28	28	28	28	28
Isolation, Inter-band, dB	28	28	28	28	28	28	28
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-150	-150	-150	-150	-150	-150	-150
Input Power per Port, maximum, watts	300	300	250	250	250	250	250

Electrical Specifications, BASTA

Frequency Band, MHz	790–862	880–960	1695–1880	1850–1990	1920–2180	2300–2500	2500–2690
Gain by all Beam Tilts, average, dBi	15.5	16.2	16.4	16.4	16.9	17.8	17.8
Gain by all Beam Tilts Tolerance, dB	±0.5	±0.3	±0.4	±0.5	±0.8	±0.4	±0.4
Gain by Beam Tilt, average, dBi	0 ° \| 15.5 5 ° \| 15.5 10 ° \| 15.6	0 ° \| 16.2 5 ° \| 16.2 10 ° \| 16.1	0 ° \| 16.3 5 ° \| 16.4 10 ° \| 16.4	0 ° \| 16.4 5 ° \| 16.4 10 ° \| 16.4	0 ° \| 16.9 5 ° \| 16.9 10 ° \| 16.9	0 ° \| 17.9 5 ° \| 17.9 10 ° \| 17.6	0 ° \| 17.7 5 ° \| 17.8 10 ° \| 17.7
Beamwidth, Horizontal Tolerance, degrees	±5.7	±4.7	±3.4	±7.3	±4.6	±3.7	±3.7
Beamwidth, Vertical Tolerance, degrees	±0.4	±0.3	±0.5	±0.3	±0.5	±0.3	±0.2
USLS, beampeak to 20° above beampeak, dB	18	18	18	18	18	18	18
Front-to-Back Total Power at 180° ± 30°, dB	23	24	26	30	30	32	32
CPR at Boresight, dB	19	18	20	20	19	17	18
CPR at Sector, dB	11	9	9	10	11	11	12

Mechanical Specifications

Wind Loading @ Velocity, frontal	1,085.0 N @ 150 km/h (243.9 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	380.0 N @ 150 km/h (85.4 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	1,404.0 N @ 150 km/h (315.6 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	893.0 N @ 150 km/h (200.8 lbf @ 150 km/h)
Wind Speed, maximum	200 km/h (124 mph)

Packaging and Weights

Width, packed	565 mm \| 22.244 in
Depth, packed	312 mm \| 12.283 in
Length, packed	2906 mm \| 114.41 in
Weight, gross	78.8 kg \| 173.724 lb

Regulatory Compliance/Certifications

Agency	Classification
CE	Compliant with the relevant CE product directives
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant/Exempted
CHINA-ROHS	Above maximum concentration value
UK-ROHS	Compliant/Exempted

General Specifications

Antenna Type	Sector
Band	Multiband
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage \| Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material	Fiberglass, UV resistant
Radiator Material	Low loss circuit board
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, high band	8
RF Connector Quantity, low band	4
RF Connector Quantity, total	12

Remote Electrical Tilt (RET) Information

RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	1 female \| 1 male
Input Voltage	10–30 Vdc
Internal RET	High band (4) \| Low band (2)
Power Consumption, idle state, maximum	2 W
Power Consumption, normal conditions, maximum	13 W
Protocol	3GPP/AISG 2.0 (Single RET)

Dimensions

Width	498 mm \| 19.606 in
Depth	197 mm \| 7.756 in
Length	2720 mm \| 107.087 in
Net Weight, without mounting kit	54 kg \| 119.049 lb

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	790 – 960 MHz \| 1695 – 2690 MHz
Polarization	±45°

Electrical Specifications

Frequency Band, MHz	790–862	880–960	1695–1880	1850–1990	1920–2180	2300–2500	2500–2690
Gain, dBi	15.8	16.4	16.7	16.8	17.4	18.1	18.1
Beamwidth, Horizontal, degrees	73	62	63	66	67	62	64
Beamwidth, Vertical, degrees	8.9	8.1	7.6	7	6.6	5.5	5.2
Beam Tilt, degrees	0–10	0–10	0–10	0–10	0–10	0–10	0–10
USLS (First Lobe), dB	18	18	18	18	18	18	18
Null Fill, dB	-22	-22	-22	-22	-22	-22	-22
Front-to-Back Ratio at 180°, dB	35	34	33	38	39	39	41
Isolation, Cross Polarization, dB	28	28	28	28	28	28	28
Isolation, Inter-band, dB	28	28	28	28	28	28	28
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-150	-150	-150	-150	-150	-150	-150
Input Power per Port, maximum, watts	300	300	250	250	250	250	250

Electrical Specifications, BASTA

Frequency Band, MHz	790–862	880–960	1695–1880	1850–1990	1920–2180	2300–2500	2500–2690
Gain by all Beam Tilts, average, dBi	15.5	16.2	16.4	16.4	16.9	17.8	17.8
Gain by all Beam Tilts Tolerance, dB	±0.5	±0.3	±0.4	±0.5	±0.8	±0.4	±0.4
Gain by Beam Tilt, average, dBi	0 ° \| 15.5; 5 ° \| 15.5; 10 ° \| 15.6	0 ° \| 16.2; 5 ° \| 16.2; 10 ° \| 16.1	0 ° \| 16.3; 5 ° \| 16.4; 10 ° \| 16.4	0 ° \| 16.4; 5 ° \| 16.4; 10 ° \| 16.4	0 ° \| 16.9; 5 ° \| 16.9; 10 ° \| 16.9	0 ° \| 17.9; 5 ° \| 17.9; 10 ° \| 17.6	0 ° \| 17.7; 5 ° \| 17.8; 10 ° \| 17.7
Beamwidth, Horizontal Tolerance, degrees	±5.7	±4.7	±3.4	±7.3	±4.6	±3.7	±3.7
Beamwidth, Vertical Tolerance, degrees	±0.4	±0.3	±0.5	±0.3	±0.5	±0.3	±0.2
USLS, beampeak to 20° above beampeak, dB	18	18	18	18	18	18	18
Front-to-Back Total Power at 180° ± 30°, dB	23	24	26	30	30	32	32
CPR at Boresight, dB	19	18	20	20	19	17	18
CPR at Sector, dB	11	9	9	10	11	11	12

Mechanical Specifications

Wind Loading @ Velocity, frontal	1,085.0 N @ 150 km/h (243.9 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	380.0 N @ 150 km/h (85.4 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	1,404.0 N @ 150 km/h (315.6 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	893.0 N @ 150 km/h (200.8 lbf @ 150 km/h)
Wind Speed, maximum	200 km/h (124 mph)

Packaging and Weights

Width, packed	565 mm \| 22.244 in
Depth, packed	312 mm \| 12.283 in
Length, packed	2906 mm \| 114.41 in
Weight, gross	78.8 kg \| 173.724 lb

Click on image to enlarge.

Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency	Classification
CE	Compliant with the relevant CE product directives
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant/Exempted
CHINA-ROHS	Above maximum concentration value
UK-ROHS	Compliant/Exempted