Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

RRV4-65S-R4N43

12-port sector antenna, 4x 694–960MHz 8deg fixed tilt and 8x 1695-2690 MHz, 65° HPBW, 4x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Sleek & Smallest Form Factor: Designed for maximum efficiency and space-saving installation
  • Symmetrical Low & Mid Band Arrays: Deliver consistent electrical performance and support 4T4R (4x MIMO) on both Low and Mid bands
  • Optimized Antenna Shape: Minimize wind load for the enhanced stability and durability

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 8
RF Connector Quantity, low band 4
RF Connector Quantity, total 12

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Mid band (4)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0

Dimensions

Width 430 mm | 16.929 in
Depth 197 mm | 7.756 in
Length 600 mm | 23.622 in
Net Weight, antenna only 12.3 kg | 27.117 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 800 W @ 50 °C

Electrical Specifications

R1-R2 R1-R2 R1-R2 Y1-Y4 Y1-Y4 Y1-Y4 Y1-Y4
Frequency Band, MHz 698–806 790–894 890–960 1695–1995 1920–2300 2300–2500 2490–2690
RF Port 1-4 1-4 1-4 5-12 5-12 5-12 5-12
Gain at Mid Tilt, dBi 9.5 9.8 9.7 12.9 12.7 14.3 14.7
Beamwidth, Horizontal, degrees 84 73 71 75 70 60 59
Beamwidth, Vertical, degrees 39 36 35 17 15.2 13.4 12.5
Beam Tilt, degrees 8 8 8 2–12 2–12 2–12 2–12
Front-to-Back Ratio at 180°, dB 26 26 26 30 30 30 30
Isolation, Cross Polarization, dB 22 22 22 22 22 22 22
Isolation, Inter-band, dB 22 22 22 22 22 22 22
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 150 150 150 150 150 150 150

Mechanical Specifications

Wind Loading @ Velocity, frontal 130.0 N @ 150 km/h (29.2 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 63.0 N @ 150 km/h (14.2 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 196.0 N @ 150 km/h (44.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 83.0 N @ 150 km/h (18.7 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 530 mm | 20.866 in
Depth, packed 349 mm | 13.740 in
Length, packed 765 mm | 30.118 in
Weight, gross 22 kg | 48.502 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 8
RF Connector Quantity, low band 4
RF Connector Quantity, total 12

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Mid band (4)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0

Dimensions

Width 430 mm | 16.929 in
Depth 197 mm | 7.756 in
Length 600 mm | 23.622 in
Net Weight, antenna only 12.3 kg | 27.117 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 800 W @ 50 °C

Electrical Specifications

R1-R2 R1-R2 R1-R2 Y1-Y4 Y1-Y4 Y1-Y4 Y1-Y4
Frequency Band, MHz 698–806 790–894 890–960 1695–1995 1920–2300 2300–2500 2490–2690
RF Port 1-4 1-4 1-4 5-12 5-12 5-12 5-12
Gain at Mid Tilt, dBi 9.5 9.8 9.7 12.9 12.7 14.3 14.7
Beamwidth, Horizontal, degrees 84 73 71 75 70 60 59
Beamwidth, Vertical, degrees 39 36 35 17 15.2 13.4 12.5
Beam Tilt, degrees 8 8 8 2–12 2–12 2–12 2–12
Front-to-Back Ratio at 180°, dB 26 26 26 30 30 30 30
Isolation, Cross Polarization, dB 22 22 22 22 22 22 22
Isolation, Inter-band, dB 22 22 22 22 22 22 22
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 150 150 150 150 150 150 150

Mechanical Specifications

Wind Loading @ Velocity, frontal 130.0 N @ 150 km/h (29.2 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 63.0 N @ 150 km/h (14.2 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 196.0 N @ 150 km/h (44.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 83.0 N @ 150 km/h (18.7 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 530 mm | 20.866 in
Depth, packed 349 mm | 13.740 in
Length, packed 765 mm | 30.118 in
Weight, gross 22 kg | 48.502 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification