ICO | Intelligent Channel Optimizer

Upstream channel optimization tool for the E6000 and C4/C4c

Specifications

Finish making your selections or clear them to view relevant specifications.

View

How to Buy

Features and Benefits

The Intelligent Channel Optimizer (ICO) is a GUI-based tool used to maximize the throughput of RF upstream channels connected to ARRIS C4 / C4c CMTS DOCSIS® 2.0 (2Dx12U) CAMs, DOCSIS 3.0 (12U and 24U) CAMs, and E6000 CER UCAMs, UCAM-2s and ARRIS E6000n RPD.

After analyzing the noise conditions present for a particular upstream channel, the ICO employs error analysis algorithms to provide guidance on optimal modulation profile and upstream channel settings.

The ICO runs on a laptop or desktop PC and may be used remotely via Telnet, Secure Shell version 2 and SNMP.

Directly measure the noise floor, excluding any transmission (burst) from CM
Capture upstream bursts from a particular CM SID, burst IUC, or logical channel
Maximize the throughput of RF upstream channels
Optimize modulation profiles ICO calculation is done for a wide range of modulation profile types, channel widths, center frequencies and forward error correction (FEC) values

Monitors upstream spectrum and analyzes upstream SC-QAM channels
Optimize modulation profiles & upstream SC-QAM channel parameters for maximum throughput
Works with E6000 CER Release 4.0 or higher, C4 CMTS Release 8.0 or higher and C4c CMTS Release 8.0 or higher
Works with ARRIS E6000n RPDs provisioned by the E6000 eCore
The ICO analysis is accomplished for a wide range of: Modulation Profile Types, Channel Widths, Center Frequencies, Forward Error Correction (FEC) Values

Specifications

General Specifications

Hardware Platform Requirements, minimum	Network Interface with IP connectivity
Major Operation Modes	Optimizer Mode \| Theory Mode \| FFT Capture Mode
Minor Operation Modes	Averaging Mode \| Worst-case Mode \| Iterative Mode
Network Protocol	Telnet \| SNMP \| SSHv2 \| SNMP \| SSHv2
Operating System	Windows 8.1 \| Windows 7 \| Java 1.5 \| Windows 10
Required CMTS Software	C4 Release 8.0 or higher \| C4c Release 8.0 or higher \| E6000n RPD Release 1.0 or higher provisioned by the E6000 \| E6000 Release 4.0 or higher
Required CMTS Hardware	E6000 CER with UCAM, UCAM-2 or ARRIS E6000n RPD \| DOCSIS 3.0 CAMs (12U and 24U) \| C4/C4c CMTS with DOCSIS 2.0 CAMs (2Dx12U)
Resolution Requirements, minimum	1024 x 768 resolution

General Specifications

Hardware Platform Requirements, minimum	Network Interface with IP connectivity
Major Operation Modes	Optimizer Mode \| Theory Mode \| FFT Capture Mode
Minor Operation Modes	Averaging Mode \| Worst-case Mode \| Iterative Mode
Network Protocol	Telnet \| SNMP \| SSHv2 \| SNMP \| SSHv2
Operating System	Windows 8.1 \| Windows 7 \| Java 1.5 \| Windows 10
Required CMTS Software	C4 Release 8.0 or higher \| C4c Release 8.0 or higher \| E6000n RPD Release 1.0 or higher provisioned by the E6000 \| E6000 Release 4.0 or higher
Required CMTS Hardware	E6000 CER with UCAM, UCAM-2 or ARRIS E6000n RPD \| DOCSIS 3.0 CAMs (12U and 24U) \| C4/C4c CMTS with DOCSIS 2.0 CAMs (2Dx12U)
Resolution Requirements, minimum	1024 x 768 resolution