Warning Icon
This product was discontinued on: December 1, 2019

For other alternatives, please contact us for more information.

0 Replacement products available

E15R02P17

SpectrumShare Active Filter for 850
Specifications
Finish making your selections or clear them to view relevant specifications.
Specifications

Product Classification

Product Type Diplexer

General Specifications

AISG Connector 8-pin DIN Female, circular
AISG Connector Standard IEC 60130-9
Connector Interface 7-16 DIN Female
Connector Interface Style Long neck

Dimensions

Height 280 mm | 11.024 in
Width 140 mm | 5.512 in
Depth 170 mm | 6.693 in

Outline Drawing

Click on image to enlarge.

Electrical Specifications

Input RF CW Power, no damage, maximum 43 dBm @ 1 min
Failure Current Consumption 185 mA ±10 mA @ 10–18 V
Lightning Protection dc Ground
Lightning Surge Current 5 kA
Lightning Surge Current Waveform 8/20 waveform
Operating Current at Voltage 100 mA ±10 mA @ 10–12 V | 140 mA ±15 mA @ 12 V
Overcurrent Protection 2 A
Overcurrent Protection Tolerance ±0.1 A
Power Consumption, maximum 2 W
Signaling Interface at Frequency 3 dBm @ 2,176 MHz
Signaling Interface Tolerance ±2 dBm
Voltage 0–48 V, survival | 7–30 V, operational

Electrical Specifications, Rx (Uplink)

Filter Attenuation, minimum 45 dB
Frequency Band 824 – 849 MHz
Gain 12 dB
Gain Ripple, maximum, specific 1 dB (UMTS diversity) | 1.5 dB (GSM main)
Gain Tolerance ±1
Group Delay Variation at Frequency, maximum 10 ns @ 240.00 MHz | 70 ns @ 5.00 MHz
Insertion Loss Ripple, Bypass Mode, specific 0.8 dB (UMTS diversity) | 1.3 dB (GSM main)
Insertion Loss, Bypass Mode, typical 6 dB
Return Loss, Bypass Mode, minimum 17 dB
Return Loss, minimum 17 dB
Isolation, minimum, specific 20 dB (GSM main to UMTS diversity) | 36 dB (GSM main to GSM diversity) | 36 dB (GSM main to UMTS main) | 36 dB (UMTS diversity to GSM diversity) | 36 dB (UMTS diversity to UMTS main)
License Band Cellular
Noise Figure, Full Band at Temperature, typical 1.70 dB @ 25 °C
Noise Figure, Mid Band at Temperature, typical 1.20 dB @ 25 °C
Output 1 dB Compression Point, minimum 10 dBm
Output IP3, minimum 23 dBm
Port Designation Antenna port 1
Total Group Delay, maximum 180 ns

Electrical Specifications 2, Rx (Uplink)

Filter Attenuation, minimum 45 dB
Frequency Band 824 – 849 MHz
Gain 12 dB
Gain Ripple, maximum, specific 1 dB (UMTS diversity) | 1.5 dB (GSM main)
Gain Tolerance ±1
Group Delay Variation at Frequency, maximum 10 ns @ 240.00 MHz | 70 ns @ 5.00 MHz
Isolation, minimum, specific 20 dB (GSM diversity to UMTS main) | 36 dB (GSM diversity to GSM main) | 36 dB (GSM diversity to UMTS diversity) | 36 dB (UMTS main to GSM main) | 36 dB (UMTS main to UMTS diversity)
License Band Cellular
Noise Figure, Full Band at Temperature, typical 1.70 dB @ 25 °C
Noise Figure, Mid Band at Temperature, typical 2.00 dB @ 25 °C
Output 1 dB Compression Point, minimum 10 dBm
Output IP3, mimimum 23 dBm
Port Designation Antenna port 2
Total Group Delay, maximum 180 ns
Insertion Loss Ripple, Bypass Mode, specific 0.8 dB (GSM diversity) | 1.3 dB (UMTS main)
Insertion Loss, Bypass Mode, typical 6 dB
Return Loss, Bypass Mode, minimum 17 dB
Return Loss, minimum 17 dB

Electrical Specifications, Tx (Downlink)

3rd Order IMD Test Method Two +43 dBm carriers
3rd Order IMD, specific -107 dBm (antenna port 1) | -95 dBm (GSM main)
Filter Attenuation, minimum 50 dB
Frequency Band 869 – 894 MHz
Group Delay Variation at Frequency, maximum 65 ns @ 5.00 MHz
License Band Cellular
Input Power, PEP, maximum 5000 W
Total Group Delay, maximum 110 ns
Insertion Loss Ripple, maximum 0.7 dB
Insertion Loss, maximum 0.85 dB
Return Loss, minimum 18 dB

Electrical Specifications 2, Tx (Downlink)

3rd Order IMD Test Method Two +43 dBm carriers
3rd Order IMD, specific -107 dBm (antenna port 2) | -95 dBm (UMTS main)
Filter Attenuation, minimum 80 dBm
Frequency Band 869 – 894 MHz
Group Delay Variation at Frequency, maximum 65 ns @ 5.00 MHz
Input Power, PEP, maximum 5000 W
Insertion Loss Ripple, maximum 0.7 dB
Insertion Loss, maximum 0.85 dB
License Band Cellular
Return Loss, minimum 18 dB
Total Group Delay, maximum 110 ns

Block Diagram

Click on image to enlarge.

Environmental Specifications

Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Ingress Protection Test Method IEC 60529:2001, IP67

Packaging and Weights

Weight, without mounting hardware 8 kg | 17.637 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Product Classification

Product Type Diplexer

General Specifications

AISG Connector 8-pin DIN Female, circular
AISG Connector Standard IEC 60130-9
Connector Interface 7-16 DIN Female
Connector Interface Style Long neck

Dimensions

Height 280 mm | 11.024 in
Width 140 mm | 5.512 in
Depth 170 mm | 6.693 in

Electrical Specifications

Input RF CW Power, no damage, maximum 43 dBm @ 1 min
Failure Current Consumption 185 mA ±10 mA @ 10–18 V
Lightning Protection dc Ground
Lightning Surge Current 5 kA
Lightning Surge Current Waveform 8/20 waveform
Operating Current at Voltage 100 mA ±10 mA @ 10–12 V | 140 mA ±15 mA @ 12 V
Overcurrent Protection 2 A
Overcurrent Protection Tolerance ±0.1 A
Power Consumption, maximum 2 W
Signaling Interface at Frequency 3 dBm @ 2,176 MHz
Signaling Interface Tolerance ±2 dBm
Voltage 0–48 V, survival | 7–30 V, operational

Electrical Specifications, Rx (Uplink)

Filter Attenuation, minimum 45 dB
Frequency Band 824 – 849 MHz
Gain 12 dB
Gain Ripple, maximum, specific 1 dB (UMTS diversity) | 1.5 dB (GSM main)
Gain Tolerance ±1
Group Delay Variation at Frequency, maximum 10 ns @ 240.00 MHz | 70 ns @ 5.00 MHz
Insertion Loss Ripple, Bypass Mode, specific 0.8 dB (UMTS diversity) | 1.3 dB (GSM main)
Insertion Loss, Bypass Mode, typical 6 dB
Return Loss, Bypass Mode, minimum 17 dB
Return Loss, minimum 17 dB
Isolation, minimum, specific 20 dB (GSM main to UMTS diversity) | 36 dB (GSM main to GSM diversity) | 36 dB (GSM main to UMTS main) | 36 dB (UMTS diversity to GSM diversity) | 36 dB (UMTS diversity to UMTS main)
License Band Cellular
Noise Figure, Full Band at Temperature, typical 1.70 dB @ 25 °C
Noise Figure, Mid Band at Temperature, typical 1.20 dB @ 25 °C
Output 1 dB Compression Point, minimum 10 dBm
Output IP3, minimum 23 dBm
Port Designation Antenna port 1
Total Group Delay, maximum 180 ns

Electrical Specifications 2, Rx (Uplink)

Filter Attenuation, minimum 45 dB
Frequency Band 824 – 849 MHz
Gain 12 dB
Gain Ripple, maximum, specific 1 dB (UMTS diversity) | 1.5 dB (GSM main)
Gain Tolerance ±1
Group Delay Variation at Frequency, maximum 10 ns @ 240.00 MHz | 70 ns @ 5.00 MHz
Isolation, minimum, specific 20 dB (GSM diversity to UMTS main) | 36 dB (GSM diversity to GSM main) | 36 dB (GSM diversity to UMTS diversity) | 36 dB (UMTS main to GSM main) | 36 dB (UMTS main to UMTS diversity)
License Band Cellular
Noise Figure, Full Band at Temperature, typical 1.70 dB @ 25 °C
Noise Figure, Mid Band at Temperature, typical 2.00 dB @ 25 °C
Output 1 dB Compression Point, minimum 10 dBm
Output IP3, mimimum 23 dBm
Port Designation Antenna port 2
Total Group Delay, maximum 180 ns
Insertion Loss Ripple, Bypass Mode, specific 0.8 dB (GSM diversity) | 1.3 dB (UMTS main)
Insertion Loss, Bypass Mode, typical 6 dB
Return Loss, Bypass Mode, minimum 17 dB
Return Loss, minimum 17 dB

Electrical Specifications, Tx (Downlink)

3rd Order IMD Test Method Two +43 dBm carriers
3rd Order IMD, specific -107 dBm (antenna port 1) | -95 dBm (GSM main)
Filter Attenuation, minimum 50 dB
Frequency Band 869 – 894 MHz
Group Delay Variation at Frequency, maximum 65 ns @ 5.00 MHz
License Band Cellular
Input Power, PEP, maximum 5000 W
Total Group Delay, maximum 110 ns
Insertion Loss Ripple, maximum 0.7 dB
Insertion Loss, maximum 0.85 dB
Return Loss, minimum 18 dB

Electrical Specifications 2, Tx (Downlink)

3rd Order IMD Test Method Two +43 dBm carriers
3rd Order IMD, specific -107 dBm (antenna port 2) | -95 dBm (UMTS main)
Filter Attenuation, minimum 80 dBm
Frequency Band 869 – 894 MHz
Group Delay Variation at Frequency, maximum 65 ns @ 5.00 MHz
Input Power, PEP, maximum 5000 W
Insertion Loss Ripple, maximum 0.7 dB
Insertion Loss, maximum 0.85 dB
License Band Cellular
Return Loss, minimum 18 dB
Total Group Delay, maximum 110 ns

Environmental Specifications

Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Ingress Protection Test Method IEC 60529:2001, IP67

Packaging and Weights

Weight, without mounting hardware 8 kg | 17.637 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
Other Ways to Browse