This product was discontinued on: December 31, 2023

For other alternatives, please contact us for more information.

1 Replacement products available

E16R02P28
Dual Band Tower Mounted Amplifier, 700//900 MHz, 12 dB, 2 BTS & 2 ANT ports, AISG with 1 RET connector (2 device with 2 sub-units), with 4.3-10 connectors

E15R02P28

Dual Band Tower Mounted Amplifier, 700//900 MHz, 12 dB, 2 BTS & 2 ANT ports, AISG with 1 RET connector (2 device with 2 sub-units)

Specifications

Finish making your selections or clear them to view relevant specifications.

Download

Features and Benefits

TMA is operating in AISG & CWA mode, Alarm Current consumption CWA mode 190 mA
2 input ports and 2 output ports
Designed to boost UP-Link Coverage and KPIs
Automatic LNA by-pass function
Connectors “in line”
Single AISG with 1 RET connector
2 devices with 2 sub-units
Built in lightning protection

Specifications

Product Classification

Product Type

1-BTS:1-ANT (Uniplex) | Tower mounted amplifier

General Specifications

Color	Gray
Modularity	2-Twin
Mounting Pipe Hardware	Band clamps (2)
RF Connector Interface	7-16 DIN Female

Dimensions

Height	151 mm \| 5.945 in
Width	305 mm \| 12.008 in
Depth	370 mm \| 14.567 in
Mounting Pipe Diameter Range	42.6–122 mm

Outline Drawing

Click on image to enlarge.

Electrical Specifications

License Band, LNA

APT 700 | CEL 900 | EDD 800

Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy	Yes
Lightning Surge Current	10 kA
Lightning Surge Current Waveform	8/20 waveform
Alarm Current, CWA Mode	190 mA ±10 mA

Electrical Specifications, AISG

AISG Connector	8-pin DIN Female
AISG Connector Standard	IEC 60130-9
Protocol	AISG 2.0
Voltage, AISG Mode	10–30 Vdc

Electrical Specifications

Sub-module	1 \| 2	1 \| 2
Branch	1	2
Port Designation	ANT 700	ANT 900
License Band	APT 700, LNA	CEL 900, LNA

Electrical Specifications, Rx Uplink

Frequency Range, MHz	703–748	898–915
Bandwidth, MHz	45.00	16.60
Gain, nominal, dB	13.0	13.0
Noise Figure, maximum, dB	2.0	2.0
Noise Figure, typical, dB	1.5	1.5
Group Delay Variation, maximum, ns	190	60
Group Delay Variation Bandwidth, MHz	5.00	5.00
Return Loss, minimum, dB	18	16
Return Loss, typical, dB	20	20
Insertion Loss - Bypass Mode, typical, dB	1.3	1.8
Return Loss - Bypass Mode, typical, dB	18	18

Electrical Specifications, Tx Downlink

Frequency Range, MHz	758–803	943–960
Bandwidth, MHz	45.00	16.60
Insertion Loss, maximum, dB	0.60	0.60
Insertion Loss, typical, dB	0.50	0.50
Group Delay Variation, maximum, ns	35	35
Group Delay Variation Bandwidth, MHz	5.00	5.00
Return Loss, minimum, dB	16	16
Return Loss, typical, dB	20	20
Input Power, RMS, maximum, W	200	200
Input Power, PEP, maximum, W	2,500	2,500
3rd Order PIM, typical, dBc	-153	-153
3rd Order PIM Test Method	Two +43 dBm carriers	Two +43 dBm carriers

Block Diagram

Click on image to enlarge.

Environmental Specifications

Operating Temperature	-40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity	Up to 100%
Corrosion Test Method	IEC 60068-2-11, 30 days
Ingress Protection Test Method	IEC 60529:2001, IP67

Packaging and Weights

Included	Mounting hardware
Volume	16.7 L
Weight, net	18 kg \| 39.683 lb

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system

Product Classification

Product Type

1-BTS:1-ANT (Uniplex) | Tower mounted amplifier

General Specifications

Color	Gray
Modularity	2-Twin
Mounting Pipe Hardware	Band clamps (2)
RF Connector Interface	7-16 DIN Female

Dimensions

Height	151 mm \| 5.945 in
Width	305 mm \| 12.008 in
Depth	370 mm \| 14.567 in
Mounting Pipe Diameter Range	42.6–122 mm

Electrical Specifications

License Band, LNA

APT 700 | CEL 900 | EDD 800

Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy	Yes
Lightning Surge Current	10 kA
Lightning Surge Current Waveform	8/20 waveform
Alarm Current, CWA Mode	190 mA ±10 mA

Electrical Specifications, AISG

AISG Connector	8-pin DIN Female
AISG Connector Standard	IEC 60130-9
Protocol	AISG 2.0
Voltage, AISG Mode	10–30 Vdc

Electrical Specifications

Sub-module	1 \| 2	1 \| 2
Branch	1	2
Port Designation	ANT 700	ANT 900
License Band	APT 700, LNA	CEL 900, LNA

Electrical Specifications, Rx Uplink

Frequency Range, MHz	703–748	898–915
Bandwidth, MHz	45.00	16.60
Gain, nominal, dB	13.0	13.0
Noise Figure, maximum, dB	2.0	2.0
Noise Figure, typical, dB	1.5	1.5
Group Delay Variation, maximum, ns	190	60
Group Delay Variation Bandwidth, MHz	5.00	5.00
Return Loss, minimum, dB	18	16
Return Loss, typical, dB	20	20
Insertion Loss - Bypass Mode, typical, dB	1.3	1.8
Return Loss - Bypass Mode, typical, dB	18	18

Electrical Specifications, Tx Downlink

Frequency Range, MHz	758–803	943–960
Bandwidth, MHz	45.00	16.60
Insertion Loss, maximum, dB	0.60	0.60
Insertion Loss, typical, dB	0.50	0.50
Group Delay Variation, maximum, ns	35	35
Group Delay Variation Bandwidth, MHz	5.00	5.00
Return Loss, minimum, dB	16	16
Return Loss, typical, dB	20	20
Input Power, RMS, maximum, W	200	200
Input Power, PEP, maximum, W	2,500	2,500
3rd Order PIM, typical, dBc	-153	-153
3rd Order PIM Test Method	Two +43 dBm carriers	Two +43 dBm carriers

Environmental Specifications

Operating Temperature	-40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity	Up to 100%
Corrosion Test Method	IEC 60068-2-11, 30 days
Ingress Protection Test Method	IEC 60529:2001, IP67