E15S02P75
Dual Band Tower Mounted Amplifier, 1800//2100 MHz, 12 dB, 2 BTS & 4 ANT ports, AISG with 1 RET connector (2 devices with 2 sub-units each)
Specifications
Features and Benefits
- Industry leading PIM performance
- TMA is operating in AISG & CWA mode, Alarm Current consumption CWA mode 250 mA
- 2 input ports and 4 output ports
- Designed to boost UP-Link Coverage and KPIs
Specifications
Product Classification
| Product Type | 1-BTS:2-ANT (Diplex) | Tower mounted amplifier |
General Specifications
| Color | Gray |
| Modularity | 2-Twin |
| Mounting | Pole | Wall |
| Mounting Pipe Hardware | Band clamps (2) |
| RF Connector Interface | 7-16 DIN Female |
Dimensions
| Height | 280 mm | 11.024 in |
| Width | 225 mm | 8.858 in |
| Depth | 104 mm | 4.094 in |
| Mounting Pipe Diameter Range | 50–120 mm |
Outline Drawing
| Click on image to enlarge. |
Electrical Specifications
| License Band, LNA | DCS 1800 | IMT 2100 |
Electrical Specifications, dc Power/Alarm
| dc Switching/Redundancy | Yes |
| Lightning Surge Current | 10 kA |
| Lightning Surge Current Waveform | 8/20 waveform |
| Voltage | 7–30 Vdc |
| Alarm Current, CWA Mode | 250 mA ±15 mA |
Electrical Specifications, AISG
| AISG Connector | 8-pin DIN Female |
| AISG Connector Standard | IEC 60130-9 |
| Protocol | AISG 2.0 |
| Voltage, AISG Mode | 10–30 Vdc |
Electrical Specifications
| Sub-module | 1 | 2 | 1 | 2 |
| Branch | 1 | 2 |
| Port Designation | ANT 1800 | ANT 2100 |
| License Band | DCS 1800, LNA | IMT 2100, LNA |
Electrical Specifications, Rx Uplink
| Frequency Range, MHz | 1710–1785 | 1920–1980 |
| Bandwidth, MHz | 75.00 | 60.00 |
| Gain, nominal, dB | 12.0 | 12.0 |
| Gain Tolerance, dB | +1.3/-1.0 | ±1 |
| Noise Figure, typical, dB | 1.5 | 1.5 |
| Group Delay Variation, maximum, ns | 30 | 16 |
| Group Delay Variation Bandwidth, MHz | 5.00 | 5.00 |
| Total Group Delay, maximum, ns | 100 | 80 |
| Return Loss, minimum, dB | 17 | 17 |
| Insertion Loss - Bypass Mode, typical, dB | 2.5 | 2.5 |
| Return Loss - Bypass Mode, typical, dB | 14 | 14 |
Electrical Specifications, Tx Downlink
| Frequency Range, MHz | 1805–1880 | 2110–2170 |
| Bandwidth, MHz | 75.00 | 60.00 |
| Insertion Loss, maximum, dB | 0.60 | 0.50 |
| Insertion Loss, typical, dB | 0.50 | 0.40 |
| Group Delay Variation, maximum, ns | 10 | 4 |
| Group Delay Variation Bandwidth, MHz | 5.00 | 5.00 |
| Total Group Delay, maximum, ns | 45 | 25 |
| Return Loss, minimum, dB | 18 | 18 |
| Input Power, RMS, maximum, W | 200 | 200 |
| Input Power, PEP, maximum, W | 2,000 | 2,000 |
| 3rd Order PIM, typical, dBc | -161 | -161 |
| 3rd Order PIM Test Method | Two +43 dBm carriers | Two +43 dBm carriers |
Block Diagram
| Click on image to enlarge. |
Environmental Specifications
| Operating Temperature | -40 °C to +65 °C (-40 °F to +149 °F) |
| Relative Humidity | Up to 100% |
| Corrosion Test Method | IEC 60068-2-11, 30 days |
| Ingress Protection Test Method | IEC 60529:2001, IP67 |
Packaging and Weights
| Included | Mounting hardware |
| Volume | 6.5 L |
| Weight, net | 7 kg | 15.432 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
Product Classification
| Product Type | 1-BTS:2-ANT (Diplex) | Tower mounted amplifier |
General Specifications
| Color | Gray |
| Modularity | 2-Twin |
| Mounting | Pole | Wall |
| Mounting Pipe Hardware | Band clamps (2) |
| RF Connector Interface | 7-16 DIN Female |
Dimensions
| Height | 280 mm | 11.024 in |
| Width | 225 mm | 8.858 in |
| Depth | 104 mm | 4.094 in |
| Mounting Pipe Diameter Range | 50–120 mm |
Electrical Specifications
| License Band, LNA | DCS 1800 | IMT 2100 |
Electrical Specifications, dc Power/Alarm
| dc Switching/Redundancy | Yes |
| Lightning Surge Current | 10 kA |
| Lightning Surge Current Waveform | 8/20 waveform |
| Voltage | 7–30 Vdc |
| Alarm Current, CWA Mode | 250 mA ±15 mA |
Electrical Specifications, AISG
| AISG Connector | 8-pin DIN Female |
| AISG Connector Standard | IEC 60130-9 |
| Protocol | AISG 2.0 |
| Voltage, AISG Mode | 10–30 Vdc |
Electrical Specifications
| Sub-module | 1 | 2 | 1 | 2 |
| Branch | 1 | 2 |
| Port Designation | ANT 1800 | ANT 2100 |
| License Band | DCS 1800, LNA | IMT 2100, LNA |
Electrical Specifications, Rx Uplink
| Frequency Range, MHz | 1710–1785 | 1920–1980 |
| Bandwidth, MHz | 75.00 | 60.00 |
| Gain, nominal, dB | 12.0 | 12.0 |
| Gain Tolerance, dB | +1.3/-1.0 | ±1 |
| Noise Figure, typical, dB | 1.5 | 1.5 |
| Group Delay Variation, maximum, ns | 30 | 16 |
| Group Delay Variation Bandwidth, MHz | 5.00 | 5.00 |
| Total Group Delay, maximum, ns | 100 | 80 |
| Return Loss, minimum, dB | 17 | 17 |
| Insertion Loss - Bypass Mode, typical, dB | 2.5 | 2.5 |
| Return Loss - Bypass Mode, typical, dB | 14 | 14 |
Electrical Specifications, Tx Downlink
| Frequency Range, MHz | 1805–1880 | 2110–2170 |
| Bandwidth, MHz | 75.00 | 60.00 |
| Insertion Loss, maximum, dB | 0.60 | 0.50 |
| Insertion Loss, typical, dB | 0.50 | 0.40 |
| Group Delay Variation, maximum, ns | 10 | 4 |
| Group Delay Variation Bandwidth, MHz | 5.00 | 5.00 |
| Total Group Delay, maximum, ns | 45 | 25 |
| Return Loss, minimum, dB | 18 | 18 |
| Input Power, RMS, maximum, W | 200 | 200 |
| Input Power, PEP, maximum, W | 2,000 | 2,000 |
| 3rd Order PIM, typical, dBc | -161 | -161 |
| 3rd Order PIM Test Method | Two +43 dBm carriers | Two +43 dBm carriers |
Environmental Specifications
| Operating Temperature | -40 °C to +65 °C (-40 °F to +149 °F) |
| Relative Humidity | Up to 100% |
| Corrosion Test Method | IEC 60068-2-11, 30 days |
| Ingress Protection Test Method | IEC 60529:2001, IP67 |
Packaging and Weights
| Included | Mounting hardware |
| Volume | 6.5 L |
| Weight, net | 7 kg | 15.432 lb |
| Click on image to enlarge. |
| Click on image to enlarge. |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
Documentation & Downloads
Installation Instruction
Product Specification
Video
Filter Products – Designed for PIM Excellence
Filter Products – Designed for PIM Excellence
Warranty
Installation Instruction
Product Compliance Documentation
Product Specification
Video
Filter Products – Designed for PIM Excellence
Filter Products – Designed for PIM Excellence
Warranty
Other Ways to Browse
