E15Z01P37
Quad Band TMA, 850/900/1800/2100, 3 devices - 2 subunits each
Specifications
Features and Benefits
- Industry leading PIM performance
- Designed to boost UP-Link Coverage and KPIs
- 2 input ports and 6 output ports
- TMA is operating in AISG & CWA mode, Alarm Current consumption CWA mode 190 mA
Specifications
Product Classification
| Product Type | 1-BTS:3-ANT (Triplex) | Tower mounted amplifier |
General Specifications
| Color | Gray |
| Modularity | 2-Twin |
| Mounting | Pole | Wall |
| Mounting Pipe Hardware | Band clamps (2) |
| RF Connector Interface | 7-16 DIN Female |
Dimensions
| Height | 281.5 mm | 11.083 in |
| Width | 237 mm | 9.331 in |
| Depth | 237 mm | 9.331 in |
| Mounting Pipe Diameter Range | 42.6–122 mm |
Outline Drawing
| Click on image to enlarge. |
Electrical Specifications
| License Band, Band Pass | CEL 850 | CEL 900 | DCS 1800 | IMT 2100 |
| License Band, LNA | DCS 1800 | IMT 2100 | IMT 2600 |
Electrical Specifications, dc Power/Alarm
| dc Switching/Redundancy | Yes |
| Lightning Surge Current | 10 kA |
| Lightning Surge Current Waveform | 8/20 waveform |
| Alarm Current, CWA Mode | 190 mA ±15 mA |
Electrical Specifications, AISG
| AISG Connector | 8-pin DIN Female |
| AISG Connector Standard | IEC 60130-9 |
| Protocol | AISG 2.0 |
| Voltage, AISG Mode | 7–30 Vdc |
Electrical Specifications
| Sub-module | 1 | 2 | 1 | 2 | 1 | 2 | 1 | 2 |
| Branch | 1 | 2 | 3 | 4 |
| Port Designation | ANT | ANT | ANT | ANT |
| License Band | CEL 850, Band Pass | CEL 900, Band Pass | DCS 1800, Band Pass | IMT 2100, Band Pass |
Electrical Specifications, Rx Uplink
| Frequency Range, MHz | 825–835 | 906.8–915 | 1710–1785 | 1920–1980 |
| Bandwidth, MHz | 10.00 | 8.20 | 75.00 | 60.00 |
| Gain, nominal, dB | 12.0 | 12.0 | 12.0 | 12.0 |
| Noise Figure, typical, dB | 1.3 | 1.4 | 1.3 | 1.4 |
| Total Group Delay, typical, ns | 180 | 150 | 100 | 70 |
| Return Loss, typical, dB | 20 | 20 | 20 | 20 |
| Insertion Loss - Bypass Mode, typical, dB | 2.1 | 2.1 | 2.1 | 2.0 |
| Return Loss - Bypass Mode, typical, dB | 16 | 16 | 16 | 16 |
Electrical Specifications, Tx Downlink
| Frequency Range, MHz | 870–880 | 951.8–960 | 1805–1880 | 2110–2170 |
| Bandwidth, MHz | 10.00 | 8.20 | 60.00 | |
| Insertion Loss, typical, dB | 0.35 | 0.50 | 0.50 | 0.40 |
| Total Group Delay, typical, ns | 60 | 180 | 50 | 25 |
| Return Loss, typical, dB | 20 | 20 | 20 | 20 |
| Input Power, RMS, maximum, W | 200 | 200 | 200 | |
| Input Power, PEP, maximum, W | 2,500 | 2,500 | 2,500 | |
| 3rd Order PIM, typical, dBc | -160 | -160 | -160 | -160 |
| 3rd Order PIM Test Method | 2 x 20 W CW tones | 2 x 20 W CW tones | 2 x 20 W CW tones | 2 x 20 W CW tones |
Block Diagram
| Click on image to enlarge. |
Environmental Specifications
| Operating Temperature | -40 °C to +65 °C (-40 °F to +149 °F) |
| Relative Humidity | Up to 100% |
| Corrosion Test Method | IEC 60068-2-11, 30 days |
| Ingress Protection Test Method | IEC 60529:2001, IP67 |
Packaging and Weights
| Included | Mounting hardware |
| Volume | 15.8 L |
| Weight, net | 22.8 kg | 50.265 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
ISO 9001:2015
|
Designed, manufactured and/or distributed under this quality management system |
Product Classification
| Product Type | 1-BTS:3-ANT (Triplex) | Tower mounted amplifier |
General Specifications
| Color | Gray |
| Modularity | 2-Twin |
| Mounting | Pole | Wall |
| Mounting Pipe Hardware | Band clamps (2) |
| RF Connector Interface | 7-16 DIN Female |
Dimensions
| Height | 281.5 mm | 11.083 in |
| Width | 237 mm | 9.331 in |
| Depth | 237 mm | 9.331 in |
| Mounting Pipe Diameter Range | 42.6–122 mm |
Electrical Specifications
| License Band, Band Pass | CEL 850 | CEL 900 | DCS 1800 | IMT 2100 |
| License Band, LNA | DCS 1800 | IMT 2100 | IMT 2600 |
Electrical Specifications, dc Power/Alarm
| dc Switching/Redundancy | Yes |
| Lightning Surge Current | 10 kA |
| Lightning Surge Current Waveform | 8/20 waveform |
| Alarm Current, CWA Mode | 190 mA ±15 mA |
Electrical Specifications, AISG
| AISG Connector | 8-pin DIN Female |
| AISG Connector Standard | IEC 60130-9 |
| Protocol | AISG 2.0 |
| Voltage, AISG Mode | 7–30 Vdc |
Electrical Specifications
| Sub-module | 1 | 2 | 1 | 2 | 1 | 2 | 1 | 2 |
| Branch | 1 | 2 | 3 | 4 |
| Port Designation | ANT | ANT | ANT | ANT |
| License Band | CEL 850, Band Pass | CEL 900, Band Pass | DCS 1800, Band Pass | IMT 2100, Band Pass |
Electrical Specifications, Rx Uplink
| Frequency Range, MHz | 825–835 | 906.8–915 | 1710–1785 | 1920–1980 |
| Bandwidth, MHz | 10.00 | 8.20 | 75.00 | 60.00 |
| Gain, nominal, dB | 12.0 | 12.0 | 12.0 | 12.0 |
| Noise Figure, typical, dB | 1.3 | 1.4 | 1.3 | 1.4 |
| Total Group Delay, typical, ns | 180 | 150 | 100 | 70 |
| Return Loss, typical, dB | 20 | 20 | 20 | 20 |
| Insertion Loss - Bypass Mode, typical, dB | 2.1 | 2.1 | 2.1 | 2.0 |
| Return Loss - Bypass Mode, typical, dB | 16 | 16 | 16 | 16 |
Electrical Specifications, Tx Downlink
| Frequency Range, MHz | 870–880 | 951.8–960 | 1805–1880 | 2110–2170 |
| Bandwidth, MHz | 10.00 | 8.20 | 60.00 | |
| Insertion Loss, typical, dB | 0.35 | 0.50 | 0.50 | 0.40 |
| Total Group Delay, typical, ns | 60 | 180 | 50 | 25 |
| Return Loss, typical, dB | 20 | 20 | 20 | 20 |
| Input Power, RMS, maximum, W | 200 | 200 | 200 | |
| Input Power, PEP, maximum, W | 2,500 | 2,500 | 2,500 | |
| 3rd Order PIM, typical, dBc | -160 | -160 | -160 | -160 |
| 3rd Order PIM Test Method | 2 x 20 W CW tones | 2 x 20 W CW tones | 2 x 20 W CW tones | 2 x 20 W CW tones |
Environmental Specifications
| Operating Temperature | -40 °C to +65 °C (-40 °F to +149 °F) |
| Relative Humidity | Up to 100% |
| Corrosion Test Method | IEC 60068-2-11, 30 days |
| Ingress Protection Test Method | IEC 60529:2001, IP67 |
Packaging and Weights
| Included | Mounting hardware |
| Volume | 15.8 L |
| Weight, net | 22.8 kg | 50.265 lb |
| Click on image to enlarge. |
| Click on image to enlarge. |
Regulatory Compliance/Certifications
| Agency | Classification |
|
ISO 9001:2015
|
Designed, manufactured and/or distributed under this quality management system |
Documentation & Downloads
Installation Instruction
Product Specification
Video
Filter Products – Designed for PIM Excellence
Filter Products – Designed for PIM Excellence
Warranty
Installation Instruction
Product Compliance Documentation
Product Specification
Video
Filter Products – Designed for PIM Excellence
Filter Products – Designed for PIM Excellence
Warranty
Other Ways to Browse
