TMAT7LABC21-21A | E15Z01P32
Twin Diplexed BTS Port, Dual Band Lower ABC 700 MHz/AWS, with AISG
Specifications
Specifications
Product Classification
| Product Type | 1-BTS:2-ANT (Diplex) | Tower mounted amplifier |
General Specifications
| Color | Gray |
| Modularity | 2-Twin |
| Mounting | Pole | Wall |
| Mounting Pipe Hardware | Band clamps (4) |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Interface Body Style | Long neck |
Dimensions
| Height | 250 mm | 9.843 in |
| Width | 292 mm | 11.496 in |
| Depth | 152.6 mm | 6.008 in |
| Mounting Pipe Diameter Range | 42.6–122 mm |
Outline Drawing
| Click on image to enlarge. |
Electrical Specifications
| License Band, LNA | AWS 1700 | USA 700 |
Electrical Specifications, dc Power/Alarm
| dc Switching/Redundancy | No |
| Operating Current at Voltage | 130 mA @ 12 V |
| Operating Current Tolerance | ±20 mA |
| Voltage | 7–30 Vdc |
| Voltage, CWA Mode | 10–18 Vdc |
| Alarm Current, CWA Mode | 170 mA @ 10–18 V (current mode) |
Electrical Specifications, AISG
| AISG Connector | 8-pin DIN Female (2) |
| AISG Connector Standard | IEC 60130-9 |
| Default Protocol | AISG 2.0 |
| Protocol | AISG 1.1 | AISG 2.0 |
| Voltage, AISG Mode | 10–30 Vdc |
Electrical Specifications
| Sub-module | 1 | 2 | 1 | 2 |
| Branch | 1 | 2 |
| Port Designation | ANT 700 ABC | ANT AWS |
| AISG 2.0 Device Subunit | E15Z01P32 1 | E15Z01P32 2 |
| License Band | USA 700, LNA | AWS 1700, LNA |
Electrical Specifications, Rx Uplink
| Frequency Range, MHz | 698–716 | 1710–1755 |
| Bandwidth, MHz | 18.00 | 45.00 |
| Gain, nominal, dB | 12.0 | 12.0 |
| Gain Tolerance, dB | ±1 | ±1 |
| Noise Figure, typical, dB | 1.7 | 1.5 |
| Total Group Delay, maximum, ns | 200 | 50 |
| Return Loss, typical, dB | 18 | 18 |
| Insertion Loss - Bypass Mode, typical, dB | 1.7 | 1.7 |
| TX Band Rejection, minimum, dB | 60 | 60 |
Electrical Specifications, Tx Downlink
| Frequency Range, MHz | 728–746 | 2110–2155 |
| Bandwidth, MHz | 18.00 | 45.00 |
| Insertion Loss, typical, dB | 0.30 | 0.15 |
| Total Group Delay, maximum, ns | 60 | 20 |
| Return Loss, minimum, dB | 18 | 18 |
| Input Power, RMS, maximum, W | 300 | 300 |
| Input Power, PEP, maximum, W | 3,000 | 3,000 |
| 3rd Order PIM, maximum, dBc | -153 | |
| 3rd Order PIM, typical, dBc | -153 | -153 |
| 3rd Order PIM Test Method | 2 x 20 W CW tones | 2 x 20 W CW tones |
Block Diagram
| Click on image to enlarge. |
Material Specifications
| Finish | Painted |
Environmental Specifications
| Operating Temperature | -40 °C to +65 °C (-40 °F to +149 °F) |
| Relative Humidity | Up to 100% |
| Corrosion Test Method | IEC 60068-2-11, 30 days |
| Ingress Protection Test Method | IEC 60529:2001, IP67 |
Packaging and Weights
| Included | Mounting hardware |
| Weight, net | 13 kg | 28.66 lb |
Product Classification
| Product Type | 1-BTS:2-ANT (Diplex) | Tower mounted amplifier |
General Specifications
| Color | Gray |
| Modularity | 2-Twin |
| Mounting | Pole | Wall |
| Mounting Pipe Hardware | Band clamps (4) |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Interface Body Style | Long neck |
Dimensions
| Height | 250 mm | 9.843 in |
| Width | 292 mm | 11.496 in |
| Depth | 152.6 mm | 6.008 in |
| Mounting Pipe Diameter Range | 42.6–122 mm |
Electrical Specifications
| License Band, LNA | AWS 1700 | USA 700 |
Electrical Specifications, dc Power/Alarm
| dc Switching/Redundancy | No |
| Operating Current at Voltage | 130 mA @ 12 V |
| Operating Current Tolerance | ±20 mA |
| Voltage | 7–30 Vdc |
| Voltage, CWA Mode | 10–18 Vdc |
| Alarm Current, CWA Mode | 170 mA @ 10–18 V (current mode) |
Electrical Specifications, AISG
| AISG Connector | 8-pin DIN Female (2) |
| AISG Connector Standard | IEC 60130-9 |
| Default Protocol | AISG 2.0 |
| Protocol | AISG 1.1 | AISG 2.0 |
| Voltage, AISG Mode | 10–30 Vdc |
Electrical Specifications
| Sub-module | 1 | 2 | 1 | 2 |
| Branch | 1 | 2 |
| Port Designation | ANT 700 ABC | ANT AWS |
| AISG 2.0 Device Subunit | E15Z01P32 1 | E15Z01P32 2 |
| License Band | USA 700, LNA | AWS 1700, LNA |
Electrical Specifications, Rx Uplink
| Frequency Range, MHz | 698–716 | 1710–1755 |
| Bandwidth, MHz | 18.00 | 45.00 |
| Gain, nominal, dB | 12.0 | 12.0 |
| Gain Tolerance, dB | ±1 | ±1 |
| Noise Figure, typical, dB | 1.7 | 1.5 |
| Total Group Delay, maximum, ns | 200 | 50 |
| Return Loss, typical, dB | 18 | 18 |
| Insertion Loss - Bypass Mode, typical, dB | 1.7 | 1.7 |
| TX Band Rejection, minimum, dB | 60 | 60 |
Electrical Specifications, Tx Downlink
| Frequency Range, MHz | 728–746 | 2110–2155 |
| Bandwidth, MHz | 18.00 | 45.00 |
| Insertion Loss, typical, dB | 0.30 | 0.15 |
| Total Group Delay, maximum, ns | 60 | 20 |
| Return Loss, minimum, dB | 18 | 18 |
| Input Power, RMS, maximum, W | 300 | 300 |
| Input Power, PEP, maximum, W | 3,000 | 3,000 |
| 3rd Order PIM, maximum, dBc | -153 | |
| 3rd Order PIM, typical, dBc | -153 | -153 |
| 3rd Order PIM Test Method | 2 x 20 W CW tones | 2 x 20 W CW tones |
Material Specifications
| Finish | Painted |
Environmental Specifications
| Operating Temperature | -40 °C to +65 °C (-40 °F to +149 °F) |
| Relative Humidity | Up to 100% |
| Corrosion Test Method | IEC 60068-2-11, 30 days |
| Ingress Protection Test Method | IEC 60529:2001, IP67 |
Packaging and Weights
| Included | Mounting hardware |
| Weight, net | 13 kg | 28.66 lb |
| Click on image to enlarge. |
| Click on image to enlarge. |
Documentation & Downloads
Installation Instruction
Product Specification
Video
Filter Products – Designed for PIM Excellence
Filter Products – Designed for PIM Excellence
Warranty
Installation Instruction
Product Compliance Documentation
Product Specification
Video
Filter Products – Designed for PIM Excellence
Filter Products – Designed for PIM Excellence
Warranty
Other Ways to Browse
