4P-4L-B2
4-port sector antenna, 4x 694–960 MHz, 65° HPBW
Features and Benefits
- All Internal RET actuators are connected in “Cascaded SRET” configuration
- Tilt indicator is available
Specifications
General Specifications
| Antenna Type | Sector |
| Band | Single band |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Aluminum |
| Reflector Material | Aluminum |
| RF Connector Interface | 4.3-10 Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, low band | 4 |
| RF Connector Quantity, total | 4 |
Remote Electrical Tilt (RET) Information
| RET Hardware | CommRET v2 |
| RET Interface | 2x 8 pin connector as per IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female Pin3: RS485A(AISG_B), Pin5: RS485B(AISG_A), Pin6: DC 10~30V, Pin7: DC_ Return |
| RET Interface, quantity | 1 female | 1 male |
| Input Voltage | 10–30 Vdc |
| Internal RET | Low band (2) |
| Power Consumption, active state, maximum | 10 W |
| Power Consumption, idle state, maximum | 2 W |
| Protocol | 3GPP/AISG 2.0 |
Dimensions
| Width | 467 mm | 18.386 in |
| Depth | 167 mm | 6.575 in |
| Length | 1997 mm | 78.622 in |
| Net Weight, antenna only | 24.5 kg | 54.013 lb |
Array Layout
| Click on image to enlarge. |
Port Configuration
| Click on image to enlarge. |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 694 – 960 MHz |
| Polarization | ±45° |
| Total Input Power, maximum | 800 W |
Electrical Specifications
| Frequency Band, MHz | 694–790 | 790–890 | 890–960 |
| Gain, dBi | 15.4 | 15.5 | 16.1 |
| Beamwidth, Horizontal, degrees | 66 | 64 | 66 |
| Beamwidth, Vertical, degrees | 11.2 | 9.7 | 9 |
| Beam Tilt, degrees | 0–10 | 0–10 | 0–10 |
| USLS (First Lobe), dB | 17 | 17 | 18 |
| Front-to-Back Ratio, Copolarization 180° ± 30°, dB | 27 | 28 | 27 |
| Isolation, Cross Polarization, dB | 26 | 26 | 26 |
| Isolation, Inter-band, dB | 26 | 26 | 26 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -150 | -150 | -150 |
| Input Power per Port, maximum, watts | 300 | 300 | 300 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 694–790 | 790–890 | 890–960 |
| Gain by all Beam Tilts, average, dBi | 15.0 | 15.3 | 15.8 |
| Gain by all Beam Tilts Tolerance, dB | ±0.7 | ±0.3 | ±0.2 |
| Beamwidth, Horizontal Tolerance, degrees | ±3.6 | ±4.2 | ±4.4 |
| Beamwidth, Vertical Tolerance, degrees | ±0.9 | ±0.5 | ±0.5 |
| Front-to-Back Total Power at 180° ± 30°, dB | 22 | 23 | 23 |
| CPR at Boresight, dB | 25 | 25 | 25 |
| CPR at Sector, dB | 12 | 10 | 11 |
Mechanical Specifications
| Wind Loading @ Velocity, frontal | 820.0 N @ 150 km/h (184.3 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 308.0 N @ 150 km/h (69.2 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 562 mm | 22.126 in |
| Depth, packed | 287 mm | 11.299 in |
| Length, packed | 2197 mm | 86.496 in |
| Weight, gross | 36 kg | 79.366 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant |
CHINA-ROHS
|
Below maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
| UK-ROHS | Compliant |
General Specifications
| Antenna Type | Sector |
| Band | Single band |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Aluminum |
| Reflector Material | Aluminum |
| RF Connector Interface | 4.3-10 Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, low band | 4 |
| RF Connector Quantity, total | 4 |
Remote Electrical Tilt (RET) Information
| RET Hardware | CommRET v2 |
| RET Interface | 2x 8 pin connector as per IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female Pin3: RS485A(AISG_B), Pin5: RS485B(AISG_A), Pin6: DC 10~30V, Pin7: DC_ Return |
| RET Interface, quantity | 1 female | 1 male |
| Input Voltage | 10–30 Vdc |
| Internal RET | Low band (2) |
| Power Consumption, active state, maximum | 10 W |
| Power Consumption, idle state, maximum | 2 W |
| Protocol | 3GPP/AISG 2.0 |
Dimensions
| Width | 467 mm | 18.386 in |
| Depth | 167 mm | 6.575 in |
| Length | 1997 mm | 78.622 in |
| Net Weight, antenna only | 24.5 kg | 54.013 lb |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 694 – 960 MHz |
| Polarization | ±45° |
| Total Input Power, maximum | 800 W |
Electrical Specifications
| Frequency Band, MHz | 694–790 | 790–890 | 890–960 |
| Gain, dBi | 15.4 | 15.5 | 16.1 |
| Beamwidth, Horizontal, degrees | 66 | 64 | 66 |
| Beamwidth, Vertical, degrees | 11.2 | 9.7 | 9 |
| Beam Tilt, degrees | 0–10 | 0–10 | 0–10 |
| USLS (First Lobe), dB | 17 | 17 | 18 |
| Front-to-Back Ratio, Copolarization 180° ± 30°, dB | 27 | 28 | 27 |
| Isolation, Cross Polarization, dB | 26 | 26 | 26 |
| Isolation, Inter-band, dB | 26 | 26 | 26 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -150 | -150 | -150 |
| Input Power per Port, maximum, watts | 300 | 300 | 300 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 694–790 | 790–890 | 890–960 |
| Gain by all Beam Tilts, average, dBi | 15.0 | 15.3 | 15.8 |
| Gain by all Beam Tilts Tolerance, dB | ±0.7 | ±0.3 | ±0.2 |
| Beamwidth, Horizontal Tolerance, degrees | ±3.6 | ±4.2 | ±4.4 |
| Beamwidth, Vertical Tolerance, degrees | ±0.9 | ±0.5 | ±0.5 |
| Front-to-Back Total Power at 180° ± 30°, dB | 22 | 23 | 23 |
| CPR at Boresight, dB | 25 | 25 | 25 |
| CPR at Sector, dB | 12 | 10 | 11 |
Mechanical Specifications
| Wind Loading @ Velocity, frontal | 820.0 N @ 150 km/h (184.3 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 308.0 N @ 150 km/h (69.2 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 562 mm | 22.126 in |
| Depth, packed | 287 mm | 11.299 in |
| Length, packed | 2197 mm | 86.496 in |
| Weight, gross | 36 kg | 79.366 lb |
| Click on image to enlarge. |
| Click on image to enlarge. |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant |
|
CHINA-ROHS
|
Below maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
| UK-ROHS | Compliant |
Documentation & Downloads
Assembly Drawing
Product Information
Product Specification
Warranty
Assembly Drawing
Product Compliance Documentation
Product Information
Product Specification
Warranty
Other Ways to Browse
