Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

EGRV4-65D-R6

14-port sector antenna, 2x 694–862, 2x 880-960, 2x 694-960 and 8x 1695–2690 MHz, 65° HPBW, 6x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • All Internal RET actuators are connected in “Cascaded SRET” configuration
  • Supports re-configurable antenna sharing capability enabling control of the internal RET system using up to two separate RET compatible OEM radios
  • A common electrical tilt setting is shared by RF Ports Y2/Y4 for MIMO 4X4 purposes

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, low band 6
RF Connector Quantity, total 14

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET High band (3) | Low band (3)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 2688 mm | 105.827 in
Net Weight, without mounting kit 59.8 kg | 131.836 lb

Array Layout

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 862 MHz | 694 – 960 MHz | 880 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

R1 R2 R3 R3 Y1-Y4 Y1-Y4 Y1-Y4 Y1-Y4
Frequency Band, MHz 694–862 880–960 694–890 880–960 1695–1920 1920–2180 2300–2500 2500–2690
Gain, dBi 15.7 16.2 16.3 17.0 17.2 18.0 18.3 17.9
Beamwidth, Horizontal, degrees 68 62 68 62 60 61 64 69
Beamwidth, Vertical, degrees 8 6.9 7.8 6.8 7.4 6.6 5.6 5.3
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 14 17 14 17 20 20 17 16
Front-to-Back Ratio at 180°, dB 30 31 30 31 36 37 34 32
Isolation, Cross Polarization, dB 28 28 28 28 28 28 28 28
Isolation, Inter-band, dB 28 28 28 28 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 300 250 300 300 250 250 200 200

Electrical Specifications, BASTA

Frequency Band, MHz 694–862 880–960 694–890 880–960 1695–1920 1920–2180 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 15.4 15.9 16.0 16.7 16.7 17.5 17.8 17.4
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.4 ±0.6 ±0.3 ±0.8 ±0.5 ±0.6 ±0.5
Gain by Beam Tilt, average, dBi 2 ° | 15.4
7 ° | 15.5
12 ° | 15.3
2 ° | 15.9
7 ° | 16.0
12 ° | 15.7
2 ° | 16.0
7 ° | 16.1
12 ° | 15.8
2 ° | 16.7
7 ° | 16.9
12 ° | 16.5
2 ° | 16.5
7 ° | 16.8
12 ° | 16.7
2 ° | 17.1
7 ° | 17.6
12 ° | 17.5
2 ° | 17.4
7 ° | 17.9
12 ° | 17.8
2 ° | 17.1
7 ° | 17.6
12 ° | 17.3
Beamwidth, Horizontal Tolerance, degrees ±5.6 ±4.4 ±4.1 ±4.3 ±4.1 ±2.8 ±5.7 ±5.1
Beamwidth, Vertical Tolerance, degrees ±0.6 ±0.4 ±0.8 ±0.4 ±0.5 ±0.5 ±0.3 ±0.2
USLS, beampeak to 20° above beampeak, dB 14 16 13 16 14 16 15 13
Front-to-Back Total Power at 180° ± 30°, dB 20 22 21 23 30 30 28 27
CPR at Boresight, dB 24 24 25 25 19 22 18 17
CPR at Sector, dB 9 7 7 8 9 9 9 6

Mechanical Specifications

Wind Loading @ Velocity, frontal 1,070.0 N @ 150 km/h (240.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 375.0 N @ 150 km/h (84.3 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,385.0 N @ 150 km/h (311.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 880.0 N @ 150 km/h (197.8 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 309 mm | 12.165 in
Length, packed 2935 mm | 115.551 in
Weight, gross 78.2 kg | 172.401 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, low band 6
RF Connector Quantity, total 14

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET High band (3) | Low band (3)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 2688 mm | 105.827 in
Net Weight, without mounting kit 59.8 kg | 131.836 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 862 MHz | 694 – 960 MHz | 880 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

R1 R2 R3 R3 Y1-Y4 Y1-Y4 Y1-Y4 Y1-Y4
Frequency Band, MHz 694–862 880–960 694–890 880–960 1695–1920 1920–2180 2300–2500 2500–2690
Gain, dBi 15.7 16.2 16.3 17.0 17.2 18.0 18.3 17.9
Beamwidth, Horizontal, degrees 68 62 68 62 60 61 64 69
Beamwidth, Vertical, degrees 8 6.9 7.8 6.8 7.4 6.6 5.6 5.3
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 14 17 14 17 20 20 17 16
Front-to-Back Ratio at 180°, dB 30 31 30 31 36 37 34 32
Isolation, Cross Polarization, dB 28 28 28 28 28 28 28 28
Isolation, Inter-band, dB 28 28 28 28 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 300 250 300 300 250 250 200 200

Electrical Specifications, BASTA

Frequency Band, MHz 694–862 880–960 694–890 880–960 1695–1920 1920–2180 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 15.4 15.9 16.0 16.7 16.7 17.5 17.8 17.4
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.4 ±0.6 ±0.3 ±0.8 ±0.5 ±0.6 ±0.5
Gain by Beam Tilt, average, dBi 2 ° | 15.4; 7 ° | 15.5;12 ° | 15.3 2 ° | 15.9; 7 ° | 16.0;12 ° | 15.7 2 ° | 16.0; 7 ° | 16.1;12 ° | 15.8 2 ° | 16.7; 7 ° | 16.9;12 ° | 16.5 2 ° | 16.5; 7 ° | 16.8;12 ° | 16.7 2 ° | 17.1; 7 ° | 17.6;12 ° | 17.5 2 ° | 17.4; 7 ° | 17.9;12 ° | 17.8 2 ° | 17.1; 7 ° | 17.6;12 ° | 17.3
Beamwidth, Horizontal Tolerance, degrees ±5.6 ±4.4 ±4.1 ±4.3 ±4.1 ±2.8 ±5.7 ±5.1
Beamwidth, Vertical Tolerance, degrees ±0.6 ±0.4 ±0.8 ±0.4 ±0.5 ±0.5 ±0.3 ±0.2
USLS, beampeak to 20° above beampeak, dB 14 16 13 16 14 16 15 13
Front-to-Back Total Power at 180° ± 30°, dB 20 22 21 23 30 30 28 27
CPR at Boresight, dB 24 24 25 25 19 22 18 17
CPR at Sector, dB 9 7 7 8 9 9 9 6

Mechanical Specifications

Wind Loading @ Velocity, frontal 1,070.0 N @ 150 km/h (240.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 375.0 N @ 150 km/h (84.3 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,385.0 N @ 150 km/h (311.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 880.0 N @ 150 km/h (197.8 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 309 mm | 12.165 in
Length, packed 2935 mm | 115.551 in
Weight, gross 78.2 kg | 172.401 lb
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted