Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

FF-65C-R2

4-port sector antenna, 4x 617–894 MHz, 65° HPBW, 2x RET, 600MHz-Ready Antenna Technology

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • 4.3-10 connector significantly improves PIM consistency and smaller footprint on antenna bottom

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, low band 4
RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (2)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 2438 mm | 95.984 in
Net Weight, without mounting kit 39.8 kg | 87.744 lb

Array Layout

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 617 – 894 MHz
Polarization ±45°
Total Input Power, maximum 700 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 617–698 698–894
Gain, dBi 15.0 15.6
Beamwidth, Horizontal, degrees 66 56
Beamwidth, Vertical, degrees 10.2 8.6
Beam Tilt, degrees 2–13 2–13
USLS (First Lobe), dB 18 17
Front-to-Back Ratio at 180°, dB 28 30
Isolation, Cross Polarization, dB 25 25
Isolation, Inter-band, dB 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150
Input Power per Port at 50°C, maximum, watts 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 617–698 698–894
Gain by all Beam Tilts, average, dBi 14.6 15.3
Gain by all Beam Tilts Tolerance, dB ±0.7 ±0.4
Beamwidth, Horizontal Tolerance, degrees ±5.4 ±5.5
Beamwidth, Vertical Tolerance, degrees ±0.6 ±1
USLS, beampeak to 20° above beampeak, dB 18 16
Front-to-Back Total Power at 180° ± 30°, dB 21 22
CPR at Boresight, dB 18 18
CPR at Sector, dB 9 8

Mechanical Specifications

Wind Loading @ Velocity, frontal 954.0 N @ 150 km/h (214.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 331.0 N @ 150 km/h (74.4 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,235.0 N @ 150 km/h (277.6 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 785.0 N @ 150 km/h (176.5 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 368 mm | 14.488 in
Length, packed 2624 mm | 103.307 in
Weight, gross 60.6 kg | 133.600 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant, Compliant/Exempted

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, low band 4
RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (2)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 2438 mm | 95.984 in
Net Weight, without mounting kit 39.8 kg | 87.744 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 617 – 894 MHz
Polarization ±45°
Total Input Power, maximum 700 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 617–698 698–894
Gain, dBi 15.0 15.6
Beamwidth, Horizontal, degrees 66 56
Beamwidth, Vertical, degrees 10.2 8.6
Beam Tilt, degrees 2–13 2–13
USLS (First Lobe), dB 18 17
Front-to-Back Ratio at 180°, dB 28 30
Isolation, Cross Polarization, dB 25 25
Isolation, Inter-band, dB 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150
Input Power per Port at 50°C, maximum, watts 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 617–698 698–894
Gain by all Beam Tilts, average, dBi 14.6 15.3
Gain by all Beam Tilts Tolerance, dB ±0.7 ±0.4
Beamwidth, Horizontal Tolerance, degrees ±5.4 ±5.5
Beamwidth, Vertical Tolerance, degrees ±0.6 ±1
USLS, beampeak to 20° above beampeak, dB 18 16
Front-to-Back Total Power at 180° ± 30°, dB 21 22
CPR at Boresight, dB 18 18
CPR at Sector, dB 9 8

Mechanical Specifications

Wind Loading @ Velocity, frontal 954.0 N @ 150 km/h (214.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 331.0 N @ 150 km/h (74.4 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,235.0 N @ 150 km/h (277.6 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 785.0 N @ 150 km/h (176.5 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 368 mm | 14.488 in
Length, packed 2624 mm | 103.307 in
Weight, gross 60.6 kg | 133.600 lb
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant, Compliant/Exempted