Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

FVV-65A-R3

6-port sector antenna, 2x 617-894 and 4x 1695–2690 MHz, 65° HPBW, 3x RET, 600 MHz-Ready Antenna Technology

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Copper | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, low band 2
RF Connector Quantity, total 6

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (2) | Low band (1)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 10 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 300 mm | 11.811 in
Depth 181 mm | 7.126 in
Length 1413 mm | 55.63 in
Net Weight, without mounting kit 15.7 kg | 34.613 lb

Array Layout

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 617 – 894 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 617–698 698–894 1695–1880 1850–1990 1920–2200 2300–2500 2500–2690
Gain, dBi 13.2 14.1 16.5 17.0 17.3 17.8 17.8
Beamwidth, Horizontal, degrees 75 74 69 66 67 64 60
Beamwidth, Vertical, degrees 18.2 15.4 7.6 7.1 6.8 5.9 5.5
Beam Tilt, degrees 2–18 2–18 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 23 23 16 16 17 19 18
Front-to-Back Ratio at 180°, dB 28 32 32 32 31 31 31
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25
Isolation, Inter-band, dB 28 28 28 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 250 250 200 200 200 200 200

Electrical Specifications, BASTA

Frequency Band, MHz 617–698 698–894 1695–1880 1850–1990 1920–2200 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 13.0 13.4 16.1 16.6 16.8 17.4 17.4
Gain by all Beam Tilts Tolerance, dB ±0.3 ±0.7 ±0.7 ±0.5 ±0.5 ±0.4 ±0.5
Gain by Beam Tilt, average, dBi 2 ° | 13.1
10 ° | 13.1
18 ° | 12.8
2 ° | 13.7
10 ° | 13.4
18 ° | 12.9
2 ° | 16.1
7 ° | 16.2
12 ° | 16.0
2 ° | 16.3
7 ° | 16.7
12 ° | 16.5
2 ° | 16.5
7 ° | 16.9
12 ° | 16.8
2 ° | 17.3
7 ° | 17.7
12 ° | 17.1
2 ° | 17.2
7 ° | 17.7
12 ° | 17.2
Beamwidth, Horizontal Tolerance, degrees ±3.2 ±5.1 ±4.8 ±3.9 ±4.9 ±5.7 ±6.7
Beamwidth, Vertical Tolerance, degrees ±1.4 ±1.9 ±0.5 ±0.3 ±0.4 ±0.3 ±0.3
USLS, beampeak to 20° above beampeak, dB 15 20 14 16 17 16 16
Front-to-Back Total Power at 180° ± 30°, dB 20 23 27 27 26 24 24
CPR at Boresight, dB 15 16 21 20 21 22 22
CPR at Sector, dB 10 10 12 12 9 5 4

Mechanical Specifications

Mechanical Tilt Range 0°–18°
Wind Loading @ Velocity, frontal 203.0 N @ 150 km/h (45.6 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 167.0 N @ 150 km/h (37.5 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 392.0 N @ 150 km/h (88.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 208.0 N @ 150 km/h (46.8 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 380 mm | 14.961 in
Depth, packed 295 mm | 11.614 in
Length, packed 1537 mm | 60.512 in
Weight, gross 26.3 kg | 57.982 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant, Compliant/Exempted

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Copper | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, low band 2
RF Connector Quantity, total 6

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (2) | Low band (1)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 10 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 300 mm | 11.811 in
Depth 181 mm | 7.126 in
Length 1413 mm | 55.63 in
Net Weight, without mounting kit 15.7 kg | 34.613 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 617 – 894 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 617–698 698–894 1695–1880 1850–1990 1920–2200 2300–2500 2500–2690
Gain, dBi 13.2 14.1 16.5 17.0 17.3 17.8 17.8
Beamwidth, Horizontal, degrees 75 74 69 66 67 64 60
Beamwidth, Vertical, degrees 18.2 15.4 7.6 7.1 6.8 5.9 5.5
Beam Tilt, degrees 2–18 2–18 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 23 23 16 16 17 19 18
Front-to-Back Ratio at 180°, dB 28 32 32 32 31 31 31
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25
Isolation, Inter-band, dB 28 28 28 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 250 250 200 200 200 200 200

Electrical Specifications, BASTA

Frequency Band, MHz 617–698 698–894 1695–1880 1850–1990 1920–2200 2300–2500 2500–2690
Gain by all Beam Tilts, average, dBi 13.0 13.4 16.1 16.6 16.8 17.4 17.4
Gain by all Beam Tilts Tolerance, dB ±0.3 ±0.7 ±0.7 ±0.5 ±0.5 ±0.4 ±0.5
Gain by Beam Tilt, average, dBi 2 ° | 13.1;10 ° | 13.1; 18 ° | 12.8 2 ° | 13.7;10 ° | 13.4; 18 ° | 12.9 2 ° | 16.1; 7 ° | 16.2;12 ° | 16.0 2 ° | 16.3; 7 ° | 16.7;12 ° | 16.5 2 ° | 16.5; 7 ° | 16.9;12 ° | 16.8 2 ° | 17.3; 7 ° | 17.7;12 ° | 17.1 2 ° | 17.2; 7 ° | 17.7;12 ° | 17.2
Beamwidth, Horizontal Tolerance, degrees ±3.2 ±5.1 ±4.8 ±3.9 ±4.9 ±5.7 ±6.7
Beamwidth, Vertical Tolerance, degrees ±1.4 ±1.9 ±0.5 ±0.3 ±0.4 ±0.3 ±0.3
USLS, beampeak to 20° above beampeak, dB 15 20 14 16 17 16 16
Front-to-Back Total Power at 180° ± 30°, dB 20 23 27 27 26 24 24
CPR at Boresight, dB 15 16 21 20 21 22 22
CPR at Sector, dB 10 10 12 12 9 5 4

Mechanical Specifications

Mechanical Tilt Range 0°–18°
Wind Loading @ Velocity, frontal 203.0 N @ 150 km/h (45.6 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 167.0 N @ 150 km/h (37.5 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 392.0 N @ 150 km/h (88.1 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 208.0 N @ 150 km/h (46.8 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 380 mm | 14.961 in
Depth, packed 295 mm | 11.614 in
Length, packed 1537 mm | 60.512 in
Weight, gross 26.3 kg | 57.982 lb
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant, Compliant/Exempted