Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

RRV4-65B-R6-PS

12-port sector antenna, 4x 698–960 and 8x 1695–2690 MHz, 65° HPBW, 6x IntRET. Bands cascaded SRET.

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • All Internal RET actuators are connected in “Cascaded SRET” configuration
  • New aerodynamic endcaps for wind load optimization
  • Integrated Antenna Orientation and Location Sensing System APS-XT-GPS
  • GPS timing synchronization output for RRH via SMA (f)

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in EN1991-1-4 standard
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 8
RF Connector Quantity, low band 4
RF Connector Quantity, total 12

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (2) | Mid band (4)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 1859 mm | 73.189 in
Net Weight, antenna only 37.2 kg | 82.012 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 1,200 W @ 50 °C

Electrical Specifications, BASTA

Frequency Band, MHz 698–806 790–894 890–960 1695–1920 1920–2200 2300–2400 2490–2690
Gain by all Beam Tilts, average, dBi 14.5 14.8 15.0 15.4 16.1 16.4 16.0
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.5 ±0.5 ±0.8 ±0.4 ±0.2 ±0.4
Beamwidth, Horizontal Tolerance, degrees ±4 ±3 ±4 ±5 ±4 ±7 ±8
Beamwidth, Vertical Tolerance, degrees ±0.9 ±0.7 ±0.7 ±0.8 ±0.7 ±0.4 ±0.4
USLS, beampeak to 20° above beampeak, dB 20 19 18 16 17 18 16
Front-to-Back Total Power at 180° ± 30°, dB 19 20 21 28 28 27 26

Mechanical Specifications

Wind Loading @ Velocity, frontal 633.0 N @ 150 km/h (142.3 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 192.0 N @ 150 km/h (43.2 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 760.0 N @ 150 km/h (170.9 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 436.0 N @ 150 km/h (98.0 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 309 mm | 12.165 in
Length, packed 2046 mm | 80.551 in
Weight, gross 49.6 kg | 109.349 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in EN1991-1-4 standard
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 8
RF Connector Quantity, low band 4
RF Connector Quantity, total 12

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET Low band (2) | Mid band (4)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 1859 mm | 73.189 in
Net Weight, antenna only 37.2 kg | 82.012 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 1,200 W @ 50 °C

Electrical Specifications, BASTA

Frequency Band, MHz 698–806 790–894 890–960 1695–1920 1920–2200 2300–2400 2490–2690
Gain by all Beam Tilts, average, dBi 14.5 14.8 15.0 15.4 16.1 16.4 16.0
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.5 ±0.5 ±0.8 ±0.4 ±0.2 ±0.4
Beamwidth, Horizontal Tolerance, degrees ±4 ±3 ±4 ±5 ±4 ±7 ±8
Beamwidth, Vertical Tolerance, degrees ±0.9 ±0.7 ±0.7 ±0.8 ±0.7 ±0.4 ±0.4
USLS, beampeak to 20° above beampeak, dB 20 19 18 16 17 18 16
Front-to-Back Total Power at 180° ± 30°, dB 19 20 21 28 28 27 26

Mechanical Specifications

Wind Loading @ Velocity, frontal 633.0 N @ 150 km/h (142.3 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 192.0 N @ 150 km/h (43.2 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 760.0 N @ 150 km/h (170.9 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 436.0 N @ 150 km/h (98.0 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 309 mm | 12.165 in
Length, packed 2046 mm | 80.551 in
Weight, gross 49.6 kg | 109.349 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

Product Specification

Product Specification