CDX68Q-DS-43 | E14F05P92
4 Pack Diplexer 617-803/817-894 MHz, DC Sense, 4.3-10
Features and Benefits
- Automatic dc switching with dc sense
- Convertible mounting brackets
- Stackable in multiples with included hardware
Specifications
Product Classification
| Product Type | Diplexer |
General Specifications
| Color | Gray |
| Common Port Label | Common |
| Modularity | 4-Quad |
| Mounting | Pole | Wall |
| Mounting Pipe Hardware | Band clamps (2) |
| RF Connector Interface | 4.3-10 Female |
| RF Connector Interface Body Style | Long neck |
Dimensions
| Height | 181 mm | 7.126 in |
| Width | 165 mm | 6.496 in |
| Depth | 252 mm | 9.921 in |
| Ground Screw Diameter | 6 mm | 0.236 in |
Outline Drawing
| Click on image to enlarge. |
Electrical Specifications
| Impedance | 50 ohm |
| License Band, Band Pass | CEL 850 | USA 700 | USA 750 |
Electrical Specifications, Common Port
| Composite Power, RMS | 200 W |
Electrical Specifications, dc Power/Alarm
| dc/AISG Pass-through Method | Auto sensing |
| dc/AISG Pass-through Path | See logic table |
| Lightning Surge Current | 10 kA |
| Lightning Surge Current Waveform | 8/20 waveform |
Electrical Specifications, AISG
| AISG Carrier | 2176 KHz ± 100 ppm |
| Insertion Loss, maximum | 1 dB |
| Return Loss, minimum | 15 dB |
Electrical Specifications
| Sub-module | 1 | 2 | 3 | 4 | 1 | 2 | 3 | 4 | 1 | 2 | 3 | 4 | 1 | 2 | 3 | 4 |
| Branch | 1 | 1 | 2 | 2 |
| Port Designation | 617–803 | 617-803 | 817–894 | 817-894 |
| License Band | USA 700, Band Pass USA 750, Band Pass | USA 700, Band Pass USA 750, Band Pass | CEL 850, Band Pass | CEL 850, Band Pass |
Electrical Specifications, Band Pass
| Frequency Range, MHz | 617–798 | 798–803 | 817–824 | 824–894 |
| Insertion Loss, maximum, dB | 0.35 | 0.50 | 0.60 | 0.40 |
| Insertion Loss, typical, dB | 0.20 | 0.30 | 0.45 | 0.30 |
| Total Group Delay, maximum, ns | 40 | 60 | 65 | 40 |
| Return Loss, minimum, dB | 20 | 20 | ||
| Return Loss, typical, dB | 23 | 23 | ||
| Isolation, typical, dB | 50 | 40 | 40 | 50 |
| Input Power, RMS, maximum, W | 200 | 200 | ||
| Input Power, PEP, maximum, W | 2,000 | 2,000 | ||
| 3rd Order PIM, minimum, dBc | -161 | -161 | ||
| 3rd Order PIM Test Method | 2 x 20 W CW tones | 2 x 20 W CW tones |
Block Diagram
| Click on image to enlarge. |
Logic Table
| Click on image to enlarge. |
Environmental Specifications
| Operating Temperature | -40 °C to +65 °C (-40 °F to +149 °F) |
| Relative Humidity | 5%–100% |
| Corrosion Test Method | IEC 60068-2-11, 30 days |
| Ingress Protection Test Method | IEC 60529:2001, IP67 |
Packaging and Weights
| Included | Mounting hardware |
| Mounting Hardware Weight | 0.6 kg | 1.323 lb |
| Volume | 7.5 L |
| Weight, without mounting hardware | 10 kg | 22.046 lb |
Product Classification
| Product Type | Diplexer |
General Specifications
| Color | Gray |
| Common Port Label | Common |
| Modularity | 4-Quad |
| Mounting | Pole | Wall |
| Mounting Pipe Hardware | Band clamps (2) |
| RF Connector Interface | 4.3-10 Female |
| RF Connector Interface Body Style | Long neck |
Dimensions
| Height | 181 mm | 7.126 in |
| Width | 165 mm | 6.496 in |
| Depth | 252 mm | 9.921 in |
| Ground Screw Diameter | 6 mm | 0.236 in |
Electrical Specifications
| Impedance | 50 ohm |
| License Band, Band Pass | CEL 850 | USA 700 | USA 750 |
Electrical Specifications, Common Port
| Composite Power, RMS | 200 W |
Electrical Specifications, dc Power/Alarm
| dc/AISG Pass-through Method | Auto sensing |
| dc/AISG Pass-through Path | See logic table |
| Lightning Surge Current | 10 kA |
| Lightning Surge Current Waveform | 8/20 waveform |
Electrical Specifications, AISG
| AISG Carrier | 2176 KHz ± 100 ppm |
| Insertion Loss, maximum | 1 dB |
| Return Loss, minimum | 15 dB |
Electrical Specifications
| Sub-module | 1 | 2 | 3 | 4 | 1 | 2 | 3 | 4 | 1 | 2 | 3 | 4 | 1 | 2 | 3 | 4 |
| Branch | 1 | 1 | 2 | 2 |
| Port Designation | 617–803 | 617-803 | 817–894 | 817-894 |
| License Band | USA 700, Band Pass; USA 750, Band Pass | USA 700, Band Pass; USA 750, Band Pass | CEL 850, Band Pass | CEL 850, Band Pass |
Electrical Specifications, Band Pass
| Frequency Range, MHz | 617–798 | 798–803 | 817–824 | 824–894 |
| Insertion Loss, maximum, dB | 0.35 | 0.50 | 0.60 | 0.40 |
| Insertion Loss, typical, dB | 0.20 | 0.30 | 0.45 | 0.30 |
| Total Group Delay, maximum, ns | 40 | 60 | 65 | 40 |
| Return Loss, minimum, dB | 20 | 20 | ||
| Return Loss, typical, dB | 23 | 23 | ||
| Isolation, typical, dB | 50 | 40 | 40 | 50 |
| Input Power, RMS, maximum, W | 200 | 200 | ||
| Input Power, PEP, maximum, W | 2,000 | 2,000 | ||
| 3rd Order PIM, minimum, dBc | -161 | -161 | ||
| 3rd Order PIM Test Method | 2 x 20 W CW tones | 2 x 20 W CW tones |
Environmental Specifications
| Operating Temperature | -40 °C to +65 °C (-40 °F to +149 °F) |
| Relative Humidity | 5%–100% |
| Corrosion Test Method | IEC 60068-2-11, 30 days |
| Ingress Protection Test Method | IEC 60529:2001, IP67 |
Packaging and Weights
| Included | Mounting hardware |
| Mounting Hardware Weight | 0.6 kg | 1.323 lb |
| Volume | 7.5 L |
| Weight, without mounting hardware | 10 kg | 22.046 lb |
| Click on image to enlarge. |
| Click on image to enlarge. |
| Click on image to enlarge. |
Documentation & Downloads
Installation Instruction
Product Specification
Video
Filter Products – Designed for PIM Excellence
Filter Products – Designed for PIM Excellence
Warranty
Installation Instruction
Product Compliance Documentation
Product Specification
Video
Filter Products – Designed for PIM Excellence
Filter Products – Designed for PIM Excellence
Warranty
Other Ways to Browse
