Warning Icon
This product was discontinued on: July 27, 2021

For other alternatives, please contact us for more information.

1 Replacement products available

E15Z09P94

Tower Mounted Amplifier, Twin Diplexed AWS/700–750 Bypass with AISG

Specifications
Finish making your selections or clear them to view relevant specifications.

Product Classification

Product Type 1-BTS:2-ANT (Diplex) | Tower mounted amplifier

General Specifications

Color Gray
Modularity 2-Twin
Mounting Pole | Wall
Mounting Pipe Hardware Band clamps (2)
RF Connector Interface 7-16 DIN Female
RF Connector Interface Body Style Long neck

Dimensions

Height 220 mm | 8.661 in
Width 155 mm | 6.102 in
Depth 108 mm | 4.252 in
Ground Screw Diameter 6 mm | 0.236 in
Mounting Pipe Diameter Range 40–160 mm

Outline Drawing

Click on image to enlarge.

Electrical Specifications

License Band, Band Pass APT 700 | LMR 750 | USA 700 | USA 750
License Band, LNA AWS 1700

Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy No
Lightning Surge Current 5 kA
Lightning Surge Current Waveform 8/20 waveform
Operating Current at Voltage 135 mA @ 12 V | 75 mA @ 24 V
Operating Current Tolerance ±15 mA
Voltage 7–30 Vdc
Voltage, CWA Mode 10–18 Vdc
Alarm Current, CWA Mode 180–200 mA @ 10–18 V

Electrical Specifications, AISG

AISG Carrier 2.176 MHz ± 100 ppm
AISG Connector 8-pin DIN Female
AISG Connector Standard IEC 60130-9
Default Protocol AISG 2.0
Protocol AISG 1.1 | AISG 2.0
Voltage, AISG Mode 10–30 Vdc

Electrical Specifications

Sub-module 1 | 2 1 | 2
Branch 1 2
Port Designation 698–805 AWS ANT
License Band APT 700, Band Pass
LMR 750, Band Pass
USA 700, Band Pass
USA 750, Band Pass
AWS 1700, LNA

Electrical Specifications, Band Pass

Frequency Range, MHz 698–805
Insertion Loss, maximum, dB 0.30
Return Loss, minimum, dB 22
Input Power, RMS, maximum, W 500
Input Power, PEP, maximum, W 5,000
3rd Order PIM, typical, dBc -153
3rd Order PIM Test Method 2 x 20 W CW tones
Higher Order PIM, typical, dBc -153
Higher Order PIM Test Method 1 x 20 W AWS CW tone
1 x 20 W PCS CW tone

Electrical Specifications, Rx Uplink

Frequency Range, MHz 1710–1770
Bandwidth, MHz 60.00
Gain, nominal, dB 13.0
Gain Tolerance, dB ±1.0
Noise Figure, typical, dB 1.3
Output IP3, minimum, dBm 25
Return Loss, minimum, dB 18
Insertion Loss - Bypass Mode, typical, dB 1.5

Electrical Specifications, Tx Downlink

Frequency Range, MHz 2110–2170
Bandwidth, MHz 60.00
Insertion Loss, typical, dB 0.30
Return Loss, minimum, dB 20
Input Power, RMS, maximum, W 500
Input Power, PEP, maximum, W 5,000

Block Diagram

Click on image to enlarge.

Material Specifications

Finish Painted

Mechanical Specifications

Wind Loading @ Velocity, maximum 33.0 N @ 115 km/h (7.4 lbf @ 115 km/h)

Environmental Specifications

Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity Up to 100%
Corrosion Test Method IEC 60068-2-11, 30 days
Ingress Protection Test Method IEC 60529:2001, IP67

Packaging and Weights

Included Mounting hardware
Weight, net 5.4 kg | 11.905 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Product Classification

Product Type 1-BTS:2-ANT (Diplex) | Tower mounted amplifier

General Specifications

Color Gray
Modularity 2-Twin
Mounting Pole | Wall
Mounting Pipe Hardware Band clamps (2)
RF Connector Interface 7-16 DIN Female
RF Connector Interface Body Style Long neck

Dimensions

Height 220 mm | 8.661 in
Width 155 mm | 6.102 in
Depth 108 mm | 4.252 in
Ground Screw Diameter 6 mm | 0.236 in
Mounting Pipe Diameter Range 40–160 mm

Electrical Specifications

License Band, Band Pass APT 700 | LMR 750 | USA 700 | USA 750
License Band, LNA AWS 1700

Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy No
Lightning Surge Current 5 kA
Lightning Surge Current Waveform 8/20 waveform
Operating Current at Voltage 135 mA @ 12 V | 75 mA @ 24 V
Operating Current Tolerance ±15 mA
Voltage 7–30 Vdc
Voltage, CWA Mode 10–18 Vdc
Alarm Current, CWA Mode 180–200 mA @ 10–18 V

Electrical Specifications, AISG

AISG Carrier 2.176 MHz ± 100 ppm
AISG Connector 8-pin DIN Female
AISG Connector Standard IEC 60130-9
Default Protocol AISG 2.0
Protocol AISG 1.1 | AISG 2.0
Voltage, AISG Mode 10–30 Vdc

Electrical Specifications

Sub-module 1 | 2 1 | 2
Branch 1 2
Port Designation 698–805 AWS ANT
License Band APT 700, Band Pass; LMR 750, Band Pass; USA 700, Band Pass; USA 750, Band Pass AWS 1700, LNA

Electrical Specifications, Band Pass

Frequency Range, MHz 698–805
Insertion Loss, maximum, dB 0.30
Return Loss, minimum, dB 22
Input Power, RMS, maximum, W 500
Input Power, PEP, maximum, W 5,000
3rd Order PIM, typical, dBc -153
3rd Order PIM Test Method 2 x 20 W CW tones
Higher Order PIM, typical, dBc -153
Higher Order PIM Test Method 1 x 20 W AWS CW tone; 1 x 20 W PCS CW tone

Electrical Specifications, Rx Uplink

Frequency Range, MHz 1710–1770
Bandwidth, MHz 60.00
Gain, nominal, dB 13.0
Gain Tolerance, dB ±1.0
Noise Figure, typical, dB 1.3
Output IP3, minimum, dBm 25
Return Loss, minimum, dB 18
Insertion Loss - Bypass Mode, typical, dB 1.5

Electrical Specifications, Tx Downlink

Frequency Range, MHz 2110–2170
Bandwidth, MHz 60.00
Insertion Loss, typical, dB 0.30
Return Loss, minimum, dB 20
Input Power, RMS, maximum, W 500
Input Power, PEP, maximum, W 5,000

Material Specifications

Finish Painted

Mechanical Specifications

Wind Loading @ Velocity, maximum 33.0 N @ 115 km/h (7.4 lbf @ 115 km/h)

Environmental Specifications

Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity Up to 100%
Corrosion Test Method IEC 60068-2-11, 30 days
Ingress Protection Test Method IEC 60529:2001, IP67

Packaging and Weights

Included Mounting hardware
Weight, net 5.4 kg | 11.905 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Product Specification

Product Specification