Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

E14R00P76

Tri Band Tower Mounted Amplifier, 700//800//900 MHz, 12 dB, 2 BTS & 2 ANT ports, AISG with 1 RET connector (1 device with 2 sub-units each)

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • TMA is operating in AISG & CWA mode, Alarm Current consumption CWA mode 190 mA
  • 2 input ports and 2 output ports
  • Designed to boost UP-Link Coverage and KPIs
  • 1 device with 2 sub-units
  • Automatic LNA by-pass function
  • Connectors “in line”
  • Single AISG with 1 RET connector
  • Built in lightning protection

Product Classification

Product Type 2-BTS:2-ANT (Uniplex) | Tower mounted amplifier

General Specifications

Color Gray
Modularity 2-Twin
Mounting Pole | Wall
Mounting Pipe Hardware Band clamps (2)
RF Connector Interface 4.3-10 Female

Dimensions

Height 250 mm | 9.843 in
Width 123 mm | 4.843 in
Depth 295 mm | 11.614 in
Mounting Pipe Diameter Range 43–122 mm

Outline Drawing

Click on image to enlarge.

Electrical Specifications

License Band, LNA APT 700 | CEL 900 | EDD 800

Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy Yes
Lightning Surge Current 10 kA
Lightning Surge Current Waveform 8/20 waveform
Alarm Current, CWA Mode 190 mA ±10 mA

Electrical Specifications, AISG

AISG Connector 8-pin DIN Female
AISG Connector Standard IEC 60130-9
Protocol AISG 2.0
Voltage, AISG Mode 7–30 Vdc

Electrical Specifications

Sub-module 1 | 2 1 | 2 1 | 2
Branch 1 2 3
Port Designation ANT ANT ANT
License Band APT 700, LNA EDD 800, LNA CEL 900, LNA

Electrical Specifications, Rx Uplink

Frequency Range, MHz 703–733 832–862 880–915
Bandwidth, MHz 30.00 30.00 35.00
Gain, nominal, dB 12.0 12.0 12.0
Noise Figure, typical, dB 1.3 1.6 1.6
Total Group Delay, typical, ns 100 210 210
Return Loss, typical, dB 20 20 20
Insertion Loss - Bypass Mode, typical, dB 2.5 3.4 3.4
Return Loss - Bypass Mode, typical, dB 16 16 16

Electrical Specifications, Tx Downlink

Frequency Range, MHz 758–788 791–821 925–960
Bandwidth, MHz 30.00 30.00 35.00
Insertion Loss, typical, dB 0.30 0.30 0.35
Total Group Delay, typical, ns 40 40 40
Return Loss, typical, dB 20 20 20
Input Power, RMS, maximum, W 200 200 200
Input Power, PEP, maximum, W 1,000 1,000 1,000
3rd Order PIM, typical, dBc -160 -160 -160
3rd Order PIM Test Method Two +43 dBm carriers Two +43 dBm carriers Two +43 dBm carriers

Block Diagram

Click on image to enlarge.

Environmental Specifications

Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Corrosion Test Method IEC 60068-2-11, 30 days
Environmental Test Method ETSI EN 300 019-1-4
Ingress Protection Test Method IEC 60529:2001, IP67

Packaging and Weights

Included Mounting hardware
Volume 9.1 L
Weight, net 10.3 kg | 22.708 lb
Weight, without mounting hardware 9.5 kg | 20.944 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Product Classification

Product Type 2-BTS:2-ANT (Uniplex) | Tower mounted amplifier

General Specifications

Color Gray
Modularity 2-Twin
Mounting Pole | Wall
Mounting Pipe Hardware Band clamps (2)
RF Connector Interface 4.3-10 Female

Dimensions

Height 250 mm | 9.843 in
Width 123 mm | 4.843 in
Depth 295 mm | 11.614 in
Mounting Pipe Diameter Range 43–122 mm

Electrical Specifications

License Band, LNA APT 700 | CEL 900 | EDD 800

Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy Yes
Lightning Surge Current 10 kA
Lightning Surge Current Waveform 8/20 waveform
Alarm Current, CWA Mode 190 mA ±10 mA

Electrical Specifications, AISG

AISG Connector 8-pin DIN Female
AISG Connector Standard IEC 60130-9
Protocol AISG 2.0
Voltage, AISG Mode 7–30 Vdc

Electrical Specifications

Sub-module 1 | 2 1 | 2 1 | 2
Branch 1 2 3
Port Designation ANT ANT ANT
License Band APT 700, LNA EDD 800, LNA CEL 900, LNA

Electrical Specifications, Rx Uplink

Frequency Range, MHz 703–733 832–862 880–915
Bandwidth, MHz 30.00 30.00 35.00
Gain, nominal, dB 12.0 12.0 12.0
Noise Figure, typical, dB 1.3 1.6 1.6
Total Group Delay, typical, ns 100 210 210
Return Loss, typical, dB 20 20 20
Insertion Loss - Bypass Mode, typical, dB 2.5 3.4 3.4
Return Loss - Bypass Mode, typical, dB 16 16 16

Electrical Specifications, Tx Downlink

Frequency Range, MHz 758–788 791–821 925–960
Bandwidth, MHz 30.00 30.00 35.00
Insertion Loss, typical, dB 0.30 0.30 0.35
Total Group Delay, typical, ns 40 40 40
Return Loss, typical, dB 20 20 20
Input Power, RMS, maximum, W 200 200 200
Input Power, PEP, maximum, W 1,000 1,000 1,000
3rd Order PIM, typical, dBc -160 -160 -160
3rd Order PIM Test Method Two +43 dBm carriers Two +43 dBm carriers Two +43 dBm carriers

Environmental Specifications

Operating Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Corrosion Test Method IEC 60068-2-11, 30 days
Environmental Test Method ETSI EN 300 019-1-4
Ingress Protection Test Method IEC 60529:2001, IP67

Packaging and Weights

Included Mounting hardware
Volume 9.1 L
Weight, net 10.3 kg | 22.708 lb
Weight, without mounting hardware 9.5 kg | 20.944 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Product Specification

Video

Filter Products – Designed for PIM Excellence
Filter Products – Designed for PIM Excellence

Product Specification

Video

Filter Products – Designed for PIM Excellence
Filter Products – Designed for PIM Excellence