1. Home
  2. CommScope Blog
  3. Earl Parsons

CommScope Author

3_ektron image

Earl Parsons

Dr. Earl Parsons is a Principal Optical Engineer in the Fiber Systems and Standards group with CommScope. He is responsible for the end-to-end optical performance of CommScope fiber products and actively participates in IEEE 802.3 Ethernet Standards.

 

Dr. Parsons received a BS in electrical engineering from Brigham Young University, Provo, Utah, USA in 2006 and a MS and PhD in optical sciences from the University of Arizona, Tucson, Arizona, USA in 2008 and 2010. From 2010 to 2013 he was a Senior Member of Technical Staff at TE SubCom, formerly known as Tyco Telecommunications. Since 2014 he has worked as a Principal Optical Engineer at CommScope in Richardson, Texas, USA. Dr. Parsons was a recipient of the IEEE Dallas Photonics Society Volunteer of the Year award in 2017.

3_ektron image Earl Parsons

March 26, 2025

Co-Packaged Optics Represent a Leap Forward for AI Data Center Efficiency

Co-packaged optics are poised to take an important (and efficient) role in the next generation of AI data centers.

Continue Reading
lir_award4.0_c_2023
3_ektron image Earl Parsons

March 01, 2023

CommScope’s Propel to be Showcased at OFC 2023

CommScope's Propel will be showcased during the Optical Fiber Communication Conference and Exhibition (OFC) 2023.

Continue Reading
dc-400x200
3_ektron image Earl Parsons

January 12, 2023

Co-Packaged Optics—the Next Evolutionary Step in Data Center Switches?

Co-packaged optics (CPO) seeks to mitigate power consumption issues in data centers by placing the optical engine and ASIC on the same substrate as a single packaged assembly. Done right, CPO would not only reduce power requirements; it could also help data centers improve port density, thermal management, and bandwidth.

Continue Reading
Propel-Ad-600x300
3_ektron image Earl Parsons

June 22, 2022

Exploring Angled Multimode Connectors in Fiber Cables

A previous CommScope blog post discussed the advantages and disadvantages of Angled Physical Contact (APC) and Ultra Physical Contact (UPC) connectors. At that time, the focus was on connectors for single mode fiber cables, APC and UPC connectors have been used with single mode fiber cables for decades.

Continue Reading
400G-800G-FF-Data-Center
3_ektron image Earl Parsons

April 06, 2022

The Terabit BiDi MSA for Data Centers

Earlier this year, a new Multi-Source Agreement (MSA) comprised of various leading optical companies was announced. This MSA—the Terabit BiDi MSA—will address applications for critical high-volume paths in modern data centers and write specifications for 800G-BiDi over eight multimode fibers and 1.6T-BiDi over sixteen multimode fibers.

Continue Reading