Warning Icon
This product was discontinued on: November 30, 2023

For other alternatives, please contact us for more information.

0 Replacement products available

CV65CSX-M | CV65CSX-2X2

4-port sector antenna, 2x 790–960 and 2x 1710–2690 MHz, 65° HPBW, RET compatible

Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Two DualPol® antennas under one radome
  • Each antenna is independently capable of field adjustable electrical tilt
  • Fully compatible with Andrew Teletilt® remote control system

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Copper | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 2
RF Connector Quantity, low band 2
RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information

Model with Factory Installed AISG 2.0 Actuator CV65CSX-2X2

Dimensions

Width 301 mm | 11.85 in
Depth 181 mm | 7.126 in
Length 2453 mm | 96.575 in
Net Weight, without mounting kit 21.2 kg | 46.738 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 790 – 960 MHz | 1710 – 2690 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 790–896 870–960 1710–1880 1850–1990 1920–2180 2300–2500 2500–2690
Gain, dBi 16.7 16.8 17.6 18.0 18.1 18.3 18.6
Beamwidth, Horizontal, degrees 63 62 70 67 67 56 60
Beamwidth, Vertical, degrees 8.1 7.6 5.6 5.3 5.1 4.4 4.1
Beam Tilt, degrees 0–10 0–10 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 15 15 16 16 16 17 19
Front-to-Back Ratio at 180°, dB 30 30 27 28 23 27 30
CPR at Boresight, dB 27 25 19 20 20 16 19
CPR at Sector, dB 10 10 10 8 9 3 6
Isolation, Cross Polarization, dB 28 28 28 28 28 28 28
Isolation, Inter-band, dB 30 30 30 30 30 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150
Input Power per Port, maximum, watts 350 350 350 350 350 300 300

Mechanical Specifications

Wind Loading @ Velocity, frontal 396.0 N @ 150 km/h (89.0 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 333.0 N @ 150 km/h (74.9 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 762.0 N @ 150 km/h (171.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 401.0 N @ 150 km/h (90.1 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 441 mm | 17.362 in
Depth, packed 337 mm | 13.268 in
Length, packed 2584 mm | 101.732 in
Weight, gross 37.3 kg | 82.232 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Copper | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 2
RF Connector Quantity, low band 2
RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information

Model with Factory Installed AISG 2.0 Actuator CV65CSX-2X2

Dimensions

Width 301 mm | 11.85 in
Depth 181 mm | 7.126 in
Length 2453 mm | 96.575 in
Net Weight, without mounting kit 21.2 kg | 46.738 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 790 – 960 MHz | 1710 – 2690 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 790–896 870–960 1710–1880 1850–1990 1920–2180 2300–2500 2500–2690
Gain, dBi 16.7 16.8 17.6 18.0 18.1 18.3 18.6
Beamwidth, Horizontal, degrees 63 62 70 67 67 56 60
Beamwidth, Vertical, degrees 8.1 7.6 5.6 5.3 5.1 4.4 4.1
Beam Tilt, degrees 0–10 0–10 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 15 15 16 16 16 17 19
Front-to-Back Ratio at 180°, dB 30 30 27 28 23 27 30
CPR at Boresight, dB 27 25 19 20 20 16 19
CPR at Sector, dB 10 10 10 8 9 3 6
Isolation, Cross Polarization, dB 28 28 28 28 28 28 28
Isolation, Inter-band, dB 30 30 30 30 30 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150
Input Power per Port, maximum, watts 350 350 350 350 350 300 300

Mechanical Specifications

Wind Loading @ Velocity, frontal 396.0 N @ 150 km/h (89.0 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 333.0 N @ 150 km/h (74.9 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 762.0 N @ 150 km/h (171.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 401.0 N @ 150 km/h (90.1 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 441 mm | 17.362 in
Depth, packed 337 mm | 13.268 in
Length, packed 2584 mm | 101.732 in
Weight, gross 37.3 kg | 82.232 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant