For other alternatives, please contact us for more information.

0 Alternative products available

FF-45C-R1

4-port sector antenna, 4x 617–894 MHz, 45° HPBW, 1x RET

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Download

Features and Benefits

Narrow beamwidth capacity antenna for higher level of densification and enhanced data throughput
High gain for maximum coverage

Specifications

General Specifications

Antenna Type	Sector
Band	Single band
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, low band	4
RF Connector Quantity, total	4

Remote Electrical Tilt (RET) Information

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	1 female \| 1 male
Input Voltage	10–30 Vdc
Internal RET	Low band (1)
Power Consumption, active state, maximum	10 W
Power Consumption, idle state, maximum	2 W
Protocol	3GPP/AISG 2.0 (Single RET)

Dimensions

Width	970 mm \| 38.189 in
Depth	235 mm \| 9.252 in
Length	2438 mm \| 95.984 in
Net Weight, without mounting kit	81.8 kg \| 180.338 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	617 – 894 MHz
Polarization	±45°
Total Input Power, maximum	600 W @ 50 °C

Electrical Specifications

Frequency Band, MHz	617–698	698–803	817–894
Gain, dBi	17.5	18.0	18.1
Beamwidth, Horizontal, degrees	48	42	39
Beamwidth, Vertical, degrees	10.2	9.2	7.9
Beam Tilt, degrees	0–10	0–10	0–10
USLS (First Lobe), dB	18	19	17
Front-to-Back Ratio at 180°, dB	42	37	36
Isolation, Cross Polarization, dB	25	25	25
Isolation, Inter-band, dB	25	25	25
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-150	-150	-150
Input Power per Port at 50°C, maximum, watts	250	250	250

Electrical Specifications, BASTA

Frequency Band, MHz	617–698	698–803	817–894
Gain by all Beam Tilts, average, dBi	17.0	17.5	17.9
Gain by all Beam Tilts Tolerance, dB	±0.7	±0.6	±0.5
Beamwidth, Horizontal Tolerance, degrees	±2.2	±4.7	±2.4
Beamwidth, Vertical Tolerance, degrees	±0.7	±0.6	±0.5
USLS, beampeak to 20° above beampeak, dB	18	19	17
Front-to-Back Total Power at 180° ± 30°, dB	27	25	26
CPR at Boresight, dB	20	19	18
CPR at 10 dB Horizontal Beamwidth, dB	10	9	12

Mechanical Specifications

Wind Loading @ Velocity, frontal	3,022.0 N @ 150 km/h (679.4 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	922.0 N @ 150 km/h (207.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	3,022.0 N @ 150 km/h (679.4 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Packaging and Weights

Width, packed	1122 mm \| 44.173 in
Depth, packed	575 mm \| 22.638 in
Length, packed	2689 mm \| 105.866 in
Weight, gross	124 kg \| 273.373 lb

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant/Exempted
CHINA-ROHS	Above maximum concentration value
UK-ROHS	Compliant/Exempted

General Specifications

Antenna Type	Sector
Band	Single band
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, low band	4
RF Connector Quantity, total	4

Remote Electrical Tilt (RET) Information

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	1 female \| 1 male
Input Voltage	10–30 Vdc
Internal RET	Low band (1)
Power Consumption, active state, maximum	10 W
Power Consumption, idle state, maximum	2 W
Protocol	3GPP/AISG 2.0 (Single RET)

Dimensions

Width	970 mm \| 38.189 in
Depth	235 mm \| 9.252 in
Length	2438 mm \| 95.984 in
Net Weight, without mounting kit	81.8 kg \| 180.338 lb

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	617 – 894 MHz
Polarization	±45°
Total Input Power, maximum	600 W @ 50 °C

Electrical Specifications

Frequency Band, MHz	617–698	698–803	817–894
Gain, dBi	17.5	18.0	18.1
Beamwidth, Horizontal, degrees	48	42	39
Beamwidth, Vertical, degrees	10.2	9.2	7.9
Beam Tilt, degrees	0–10	0–10	0–10
USLS (First Lobe), dB	18	19	17
Front-to-Back Ratio at 180°, dB	42	37	36
Isolation, Cross Polarization, dB	25	25	25
Isolation, Inter-band, dB	25	25	25
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-150	-150	-150
Input Power per Port at 50°C, maximum, watts	250	250	250

Electrical Specifications, BASTA

Frequency Band, MHz	617–698	698–803	817–894
Gain by all Beam Tilts, average, dBi	17.0	17.5	17.9
Gain by all Beam Tilts Tolerance, dB	±0.7	±0.6	±0.5
Beamwidth, Horizontal Tolerance, degrees	±2.2	±4.7	±2.4
Beamwidth, Vertical Tolerance, degrees	±0.7	±0.6	±0.5
USLS, beampeak to 20° above beampeak, dB	18	19	17
Front-to-Back Total Power at 180° ± 30°, dB	27	25	26
CPR at Boresight, dB	20	19	18
CPR at 10 dB Horizontal Beamwidth, dB	10	9	12

Mechanical Specifications

Wind Loading @ Velocity, frontal	3,022.0 N @ 150 km/h (679.4 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	922.0 N @ 150 km/h (207.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	3,022.0 N @ 150 km/h (679.4 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Packaging and Weights

Width, packed	1122 mm \| 44.173 in
Depth, packed	575 mm \| 22.638 in
Length, packed	2689 mm \| 105.866 in
Weight, gross	124 kg \| 273.373 lb

Click on image to enlarge.

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant/Exempted
CHINA-ROHS	Above maximum concentration value
UK-ROHS	Compliant/Exempted