1. Home
  2. Product Type
  3. Antennas
  4. Base Station Antennas & Equipment
  5. Base Station Antennas
  6. LDX-3316DS-VTM | LDX-3316DS-A1M
Warning Icon
This product was discontinued on: March 27, 2020

For other alternatives, please contact us for more information.

0 Replacement products available

LDX-3316DS-VTM | LDX-3316DS-A1M

2-port sector antenna, 2x 790–960 MHz, 33° HPBW, RET compatible

Specifications
Finish making your selections or clear them to view relevant specifications.

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, low band 2
RF Connector Quantity, total 2

Remote Electrical Tilt (RET) Information

Model with Factory Installed AISG 2.0 Actuator LDX-3316DS-A1M

Dimensions

Width 591 mm | 23.268 in
Depth 179 mm | 7.047 in
Length 1306 mm | 51.417 in
Net Weight, without mounting kit 17.9 kg | 39.463 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 790 – 960 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 790–896 870–960
Gain, dBi 17.8 18.3
Beamwidth, Horizontal, degrees 34 32
Beamwidth, Vertical, degrees 16 15
Beam Tilt, degrees 2–12 2–12
USLS (First Lobe), dB 14 13
Front-to-Back Ratio at 180°, dB 31 36
CPR at Boresight, dB 15 11
Isolation, Cross Polarization, dB 30 30
VSWR | Return loss, dB 1.4 | 15.6 1.4 | 15.6
PIM, 3rd Order, 2 x 20 W, dBc -150 -150
Input Power per Port, maximum, watts 300 300

Electrical Specifications, BASTA

Frequency Band, MHz 790–896 870–960
Gain by all Beam Tilts, average, dBi 17.5 17.9
Gain by all Beam Tilts Tolerance, dB ±0.6 ±0.3
Gain by Beam Tilt, average, dBi 2 ° | 17.6
7 ° | 17.5
12 ° | 17.5		 2 ° | 18.0
7 ° | 18.0
12 ° | 17.7
Beamwidth, Horizontal Tolerance, degrees ±2 ±2
Beamwidth, Vertical Tolerance, degrees ±1 ±1
USLS, beampeak to 20° above beampeak, dB 14 14
Front-to-Back Total Power at 180° ± 30°, dB 29 29
CPR at Boresight, dB 15 12

Mechanical Specifications

Wind Loading @ Velocity, frontal 933.0 N @ 150 km/h (209.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 129.0 N @ 150 km/h (29.0 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 1,059.0 N @ 150 km/h (238.1 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 814 mm | 32.047 in
Depth, packed 320 mm | 12.598 in
Length, packed 1712 mm | 67.402 in
Weight, gross 29.4 kg | 64.816 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, low band 2
RF Connector Quantity, total 2

Remote Electrical Tilt (RET) Information

Model with Factory Installed AISG 2.0 Actuator LDX-3316DS-A1M

Dimensions

Width 591 mm | 23.268 in
Depth 179 mm | 7.047 in
Length 1306 mm | 51.417 in
Net Weight, without mounting kit 17.9 kg | 39.463 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 790 – 960 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 790–896 870–960
Gain, dBi 17.8 18.3
Beamwidth, Horizontal, degrees 34 32
Beamwidth, Vertical, degrees 16 15
Beam Tilt, degrees 2–12 2–12
USLS (First Lobe), dB 14 13
Front-to-Back Ratio at 180°, dB 31 36
CPR at Boresight, dB 15 11
Isolation, Cross Polarization, dB 30 30
VSWR | Return loss, dB 1.4 | 15.6 1.4 | 15.6
PIM, 3rd Order, 2 x 20 W, dBc -150 -150
Input Power per Port, maximum, watts 300 300

Electrical Specifications, BASTA

Frequency Band, MHz 790–896 870–960
Gain by all Beam Tilts, average, dBi 17.5 17.9
Gain by all Beam Tilts Tolerance, dB ±0.6 ±0.3
Gain by Beam Tilt, average, dBi 2 ° | 17.6; 7 ° | 17.5;12 ° | 17.5 2 ° | 18.0; 7 ° | 18.0;12 ° | 17.7
Beamwidth, Horizontal Tolerance, degrees ±2 ±2
Beamwidth, Vertical Tolerance, degrees ±1 ±1
USLS, beampeak to 20° above beampeak, dB 14 14
Front-to-Back Total Power at 180° ± 30°, dB 29 29
CPR at Boresight, dB 15 12

Mechanical Specifications

Wind Loading @ Velocity, frontal 933.0 N @ 150 km/h (209.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 129.0 N @ 150 km/h (29.0 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 1,059.0 N @ 150 km/h (238.1 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 814 mm | 32.047 in
Depth, packed 320 mm | 12.598 in
Length, packed 1712 mm | 67.402 in
Weight, gross 29.4 kg | 64.816 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant