NT-360M-F

3-port omni antenna, 1x 825-896 and 2x 2490–2690 MHz, low band vertical polarization and high band horizontal/vertical polarization, 360° horizontal beamwidth

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Download

Specifications

General Specifications

Antenna Type	Omni
Band	Multiband
Grounding Type	RF connector body grounded to mounting interface
Performance Note	Outdoor usage \| Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material	Fiberglass, UV resistant
Radiator Material	Brass
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, high band	2
RF Connector Quantity, mid band	0
RF Connector Quantity, low band	1
RF Connector Quantity, total	3

Dimensions

Length	998 mm \| 39.291 in
Net Weight, without mounting kit	3 kg \| 6.614 lb
Outer Diameter	56 mm \| 2.205 in

Mounting Hole Pattern

Click on image to enlarge.

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	825 – 896 MHz \| 2490 – 2690 MHz
Total Input Power, maximum	250 W @ 50 °C

Electrical Specifications

Frequency Band, MHz	825–896	2490–2690
Gain, dBi	2.9	6.2
Beamwidth, Horizontal, degrees	360	360
Beamwidth, Vertical, degrees	130	20.5
Beam Tilt, degrees	0	0
USLS, typical, dB		9
Isolation, Cross Polarization, dB		30
Isolation, Inter-band, dB	26	26
VSWR \| Return loss, dB	1.54 \| 13.5	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-145	-145
Input Power per Port at 50°C, maximum, watts	100	100

Mechanical Specifications

Wind Loading @ Velocity, frontal	56.0 N @ 150 km/h (12.6 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Packaging and Weights

Width, packed	251 mm \| 9.882 in
Depth, packed	237 mm \| 9.331 in
Length, packed	1121 mm \| 44.134 in
Weight, gross	5.9 kg \| 13.007 lb

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system

General Specifications

Antenna Type	Omni
Band	Multiband
Grounding Type	RF connector body grounded to mounting interface
Performance Note	Outdoor usage \| Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material	Fiberglass, UV resistant
Radiator Material	Brass
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, high band	2
RF Connector Quantity, mid band	0
RF Connector Quantity, low band	1
RF Connector Quantity, total	3

Dimensions

Length	998 mm \| 39.291 in
Net Weight, without mounting kit	3 kg \| 6.614 lb
Outer Diameter	56 mm \| 2.205 in

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	825 – 896 MHz \| 2490 – 2690 MHz
Total Input Power, maximum	250 W @ 50 °C

Electrical Specifications

Frequency Band, MHz	825–896	2490–2690
Gain, dBi	2.9	6.2
Beamwidth, Horizontal, degrees	360	360
Beamwidth, Vertical, degrees	130	20.5
Beam Tilt, degrees	0	0
USLS, typical, dB		9
Isolation, Cross Polarization, dB		30
Isolation, Inter-band, dB	26	26
VSWR \| Return loss, dB	1.54 \| 13.5	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-145	-145
Input Power per Port at 50°C, maximum, watts	100	100