Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

RRVV2HH-6533B-R6

16-port sector antenna, 4x 694–960, 4x 1695-2690 MHz 65° HPBW and 8x 1695-2400 MHz 2x 2-beam 33° HPBW, 6x RET. Bands cascaded SRET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • All Internal RET actuators are connected in “Cascaded SRET” configuration

General Specifications

Antenna Type Multibeam
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 12
RF Connector Quantity, low band 4
RF Connector Quantity, total 16

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET High band (4) | Low band (2)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 10 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 2100 mm | 82.677 in
Net Weight, without mounting kit 46 kg | 101.413 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz | 1695 – 2400 MHz
Polarization ±45°
Total Input Power, maximum 1,300 W @ 50 °C

Electrical Specifications

R1-R2 R1-R2 R1-R2 HB-Dual-Beam2 HB-Dual-Beam2 Y1-Y2 Y1-Y2
Frequency Band, MHz 694–790 790–890 890–960 1695–1920 1920–2400 1695–2180 2300–2690
Gain, dBi 15.1 15.3 15.6 16.6 18.2 17.0 18.3
Beam Centers, Horizontal, degrees ±27 ±27
Beamwidth, Horizontal, degrees 72 67 64 32 28 71 58
Beamwidth, Vertical, degrees 11 9.8 9 9.5 8.2 7.1 5.6
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 17 17 18 16 18 19 22
Front-to-Back Ratio at 180°, dB 32 31 32 34 33 33 33
Isolation, Cross Polarization, dB 28 28 28 25 25 25 25
Isolation, Inter-band, dB 28 28 28 17 17 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 300 300 300 250 250 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–890 890–960 1695–1920 1920–2400 1695–2180 2300–2690
Gain by all Beam Tilts, average, dBi 14.5 14.9 15.4 16.1 17.6 16.2 17.8
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.4 ±0.3 ±1.3 ±1.1 ±1.1 ±0.6
Gain by Beam Tilt, average, dBi 2 ° | 14.6
7 ° | 14.6
12 ° | 14.5
2 ° | 14.9
7 ° | 15.0
12 ° | 14.9
2 ° | 15.3
7 ° | 15.5
12 ° | 15.3
2 ° | 16.1
7 ° | 16.2
12 ° | 15.8
2 ° | 17.7
7 ° | 17.8
12 ° | 17.0
2 ° | 16.4
7 ° | 16.3
12 ° | 16.0
2 ° | 17.6
7 ° | 18.0
12 ° | 17.6
Beamwidth, Horizontal Tolerance, degrees ±6.5 ±6.5 ±2.9 ±2.7 ±2.7 ±7.2 ±5.5
Beamwidth, Vertical Tolerance, degrees ±0.6 ±0.6 ±0.6 ±0.8 ±0.8 ±0.8 ±0.4
USLS, beampeak to 20° above beampeak, dB 17 17 16 16 17 15 16
Front-to-Back Total Power at 180° ± 30°, dB 21 22 21 28 28 25 25
CPR at Boresight, dB 19 20 19 20 20 18 24
CPR at Sector, dB 12 10 13 8 5
CPR at 10 dB Horizontal Beamwidth, dB 6 10

Mechanical Specifications

Effective Projective Area (EPA), frontal 0.75 m² | 8.073 ft²
Effective Projective Area (EPA), lateral 0.26 m² | 2.799 ft²
Mechanical Tilt Range 0°–12°
Wind Loading @ Velocity, frontal 803.0 N @ 150 km/h (180.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 275.0 N @ 150 km/h (61.8 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,040.0 N @ 150 km/h (233.8 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 661.0 N @ 150 km/h (148.6 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 368 mm | 14.488 in
Length, packed 2279 mm | 89.724 in
Weight, gross 59.8 kg | 131.836 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Multibeam
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 12
RF Connector Quantity, low band 4
RF Connector Quantity, total 16

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET High band (4) | Low band (2)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 10 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 2100 mm | 82.677 in
Net Weight, without mounting kit 46 kg | 101.413 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz | 1695 – 2400 MHz
Polarization ±45°
Total Input Power, maximum 1,300 W @ 50 °C

Electrical Specifications

R1-R2 R1-R2 R1-R2 HB-Dual-Beam2 HB-Dual-Beam2 Y1-Y2 Y1-Y2
Frequency Band, MHz 694–790 790–890 890–960 1695–1920 1920–2400 1695–2180 2300–2690
Gain, dBi 15.1 15.3 15.6 16.6 18.2 17.0 18.3
Beam Centers, Horizontal, degrees ±27 ±27
Beamwidth, Horizontal, degrees 72 67 64 32 28 71 58
Beamwidth, Vertical, degrees 11 9.8 9 9.5 8.2 7.1 5.6
Beam Tilt, degrees 2–12 2–12 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 17 17 18 16 18 19 22
Front-to-Back Ratio at 180°, dB 32 31 32 34 33 33 33
Isolation, Cross Polarization, dB 28 28 28 25 25 25 25
Isolation, Inter-band, dB 28 28 28 17 17 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 300 300 300 250 250 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 694–790 790–890 890–960 1695–1920 1920–2400 1695–2180 2300–2690
Gain by all Beam Tilts, average, dBi 14.5 14.9 15.4 16.1 17.6 16.2 17.8
Gain by all Beam Tilts Tolerance, dB ±0.5 ±0.4 ±0.3 ±1.3 ±1.1 ±1.1 ±0.6
Gain by Beam Tilt, average, dBi 2 ° | 14.6; 7 ° | 14.6;12 ° | 14.5 2 ° | 14.9; 7 ° | 15.0;12 ° | 14.9 2 ° | 15.3; 7 ° | 15.5;12 ° | 15.3 2 ° | 16.1; 7 ° | 16.2;12 ° | 15.8 2 ° | 17.7; 7 ° | 17.8;12 ° | 17.0 2 ° | 16.4; 7 ° | 16.3;12 ° | 16.0 2 ° | 17.6; 7 ° | 18.0;12 ° | 17.6
Beamwidth, Horizontal Tolerance, degrees ±6.5 ±6.5 ±2.9 ±2.7 ±2.7 ±7.2 ±5.5
Beamwidth, Vertical Tolerance, degrees ±0.6 ±0.6 ±0.6 ±0.8 ±0.8 ±0.8 ±0.4
USLS, beampeak to 20° above beampeak, dB 17 17 16 16 17 15 16
Front-to-Back Total Power at 180° ± 30°, dB 21 22 21 28 28 25 25
CPR at Boresight, dB 19 20 19 20 20 18 24
CPR at Sector, dB 12 10 13 8 5
CPR at 10 dB Horizontal Beamwidth, dB 6 10

Mechanical Specifications

Effective Projective Area (EPA), frontal 0.75 m² | 8.073 ft²
Effective Projective Area (EPA), lateral 0.26 m² | 2.799 ft²
Mechanical Tilt Range 0°–12°
Wind Loading @ Velocity, frontal 803.0 N @ 150 km/h (180.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 275.0 N @ 150 km/h (61.8 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,040.0 N @ 150 km/h (233.8 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 661.0 N @ 150 km/h (148.6 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 368 mm | 14.488 in
Length, packed 2279 mm | 89.724 in
Weight, gross 59.8 kg | 131.836 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted