Warning Icon
This product was discontinued on: March 31, 2021

For other alternatives, please contact us for more information.

0 Replacement products available

RV4PX310R-E2

10-port sector antenna, 2x 694–960 and 8x 1695–2690 MHz, 65° HPBW, 5x RET with manual override. Bands cascaded SRET.

Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Integrated Internal Remote Electrical Tilt (RET), with independent control of electrical tilt with manual override on all arrays
  • All Internal RET actuators are connected in “Cascaded SRET” configuration

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, low band 2
RF Connector Quantity, total 10

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v1
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (4) | Low band (1)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 350 mm | 13.78 in
Depth 208 mm | 8.189 in
Length 2533 mm | 99.724 in
Net Weight, without mounting kit 39.7 kg | 87.523 lb

Array Layout

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 1,000 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 694–798 790–894 890–960 1695–1880 1850–1990 1920–2200 2300–2690
Gain, dBi 16.0 16.6 16.9 16.8 16.9 17.2 18.0
Beamwidth, Horizontal, degrees 69 68 66 63 62 63 61
Beamwidth, Vertical, degrees 9.9 8.7 8.1 8.3 7.7 7.1 6
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10 0–10 0–10
USLS (First Lobe), dB 18 18 18 18 18 18 18
Null Fill, dB -22 -22 -22 -22 -22 -22 -22
Front-to-Back Ratio at 180°, dB 31 34 33 32 39 37 38
Isolation, Cross Polarization, dB 28 28 28 30 30 30 30
Isolation, Inter-band, dB 30 30 30 30 30 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 300 300 300 250 250 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 694–798 790–894 890–960 1695–1880 1850–1990 1920–2200 2300–2690
Gain by all Beam Tilts, average, dBi 15.8 16.4 16.8 16.3 16.6 16.9 17.6
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.3 ±0.2 ±0.5 ±0.4 ±0.4 ±0.5
Gain by Beam Tilt, average, dBi 0 ° | 15.9
5 ° | 15.8
10 ° | 15.8
0 ° | 16.4
5 ° | 16.4
10 ° | 16.4
0 ° | 16.7
5 ° | 16.7
10 ° | 16.8
0 ° | 16.3
5 ° | 16.3
10 ° | 16.4
0 ° | 16.6
5 ° | 16.6
10 ° | 16.7
0 ° | 16.9
5 ° | 17.0
10 ° | 16.9
0 ° | 17.6
5 ° | 17.6
10 ° | 17.4
Beamwidth, Horizontal Tolerance, degrees ±1.3 ±0.7 ±1.4 ±2.3 ±1.8 ±2.7 ±5.2
Beamwidth, Vertical Tolerance, degrees ±0.7 ±0.5 ±0.3 ±0.5 ±0.3 ±0.5 ±0.4
USLS, beampeak to 20° above beampeak, dB 18 18 18 18 18 18 18
Front-to-Back Total Power at 180° ± 30°, dB 26 27 27 26 29 27 29
CPR at Boresight, dB 16 18 17 17 21 19 18
CPR at Sector, dB 12 13 16 13 12 12 10

Mechanical Specifications

Wind Loading @ Velocity, frontal 445.0 N @ 150 km/h (100.0 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 379.0 N @ 150 km/h (85.2 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 942.0 N @ 150 km/h (211.8 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 472.0 N @ 150 km/h (106.1 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 436 mm | 17.165 in
Depth, packed 320 mm | 12.598 in
Length, packed 2720 mm | 107.087 in
Weight, gross 63.2 kg | 139.332 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, low band 2
RF Connector Quantity, total 10

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v1
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (4) | Low band (1)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 350 mm | 13.78 in
Depth 208 mm | 8.189 in
Length 2533 mm | 99.724 in
Net Weight, without mounting kit 39.7 kg | 87.523 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1695 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 1,000 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 694–798 790–894 890–960 1695–1880 1850–1990 1920–2200 2300–2690
Gain, dBi 16.0 16.6 16.9 16.8 16.9 17.2 18.0
Beamwidth, Horizontal, degrees 69 68 66 63 62 63 61
Beamwidth, Vertical, degrees 9.9 8.7 8.1 8.3 7.7 7.1 6
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10 0–10 0–10
USLS (First Lobe), dB 18 18 18 18 18 18 18
Null Fill, dB -22 -22 -22 -22 -22 -22 -22
Front-to-Back Ratio at 180°, dB 31 34 33 32 39 37 38
Isolation, Cross Polarization, dB 28 28 28 30 30 30 30
Isolation, Inter-band, dB 30 30 30 30 30 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 300 300 300 250 250 250 250

Electrical Specifications, BASTA

Frequency Band, MHz 694–798 790–894 890–960 1695–1880 1850–1990 1920–2200 2300–2690
Gain by all Beam Tilts, average, dBi 15.8 16.4 16.8 16.3 16.6 16.9 17.6
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.3 ±0.2 ±0.5 ±0.4 ±0.4 ±0.5
Gain by Beam Tilt, average, dBi 0 ° | 15.9; 5 ° | 15.8; 10 ° | 15.8 0 ° | 16.4; 5 ° | 16.4; 10 ° | 16.4 0 ° | 16.7; 5 ° | 16.7; 10 ° | 16.8 0 ° | 16.3; 5 ° | 16.3; 10 ° | 16.4 0 ° | 16.6; 5 ° | 16.6; 10 ° | 16.7 0 ° | 16.9; 5 ° | 17.0; 10 ° | 16.9 0 ° | 17.6; 5 ° | 17.6; 10 ° | 17.4
Beamwidth, Horizontal Tolerance, degrees ±1.3 ±0.7 ±1.4 ±2.3 ±1.8 ±2.7 ±5.2
Beamwidth, Vertical Tolerance, degrees ±0.7 ±0.5 ±0.3 ±0.5 ±0.3 ±0.5 ±0.4
USLS, beampeak to 20° above beampeak, dB 18 18 18 18 18 18 18
Front-to-Back Total Power at 180° ± 30°, dB 26 27 27 26 29 27 29
CPR at Boresight, dB 16 18 17 17 21 19 18
CPR at Sector, dB 12 13 16 13 12 12 10

Mechanical Specifications

Wind Loading @ Velocity, frontal 445.0 N @ 150 km/h (100.0 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 379.0 N @ 150 km/h (85.2 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 942.0 N @ 150 km/h (211.8 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 472.0 N @ 150 km/h (106.1 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 436 mm | 17.165 in
Depth, packed 320 mm | 12.598 in
Length, packed 2720 mm | 107.087 in
Weight, gross 63.2 kg | 139.332 lb
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant/Exempted

Product Specification

Product Specification