Warning Icon
This product was discontinued on: March 30, 2024

For other alternatives, please contact us for more information.

0 Replacement products available

T4-90A-R1-V5

Planar Array Antenna, 2300–2690 MHz, 90° HPBW, 1xIntRET

Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • For use in beamforming system, includes a calibration port
  • Planar array antenna – 4 columns
  • Single internal RET control for all four antenna arrays
  • Optimized for software defined split six sector applications

General Specifications

Antenna Type Sector
Band Single band
Calibration Connector Interface MQ5
Calibration Connector Quantity 1
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material PVC, UV resistant
Reflector Material Aluminum
RF Connector Interface MQ4 | MQ5
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v1
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal Bias Tee Cal Port
Internal RET High band (1)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 307 mm | 12.087 in
Depth 118 mm | 4.646 in
Length 1610 mm | 63.386 in
Net Weight, without mounting kit 15.6 kg | 34.392 lb
TDD Column Spacing 58 mm | 2.283 in

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 2300 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 500 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 2300–2400 2496–2690
Gain, dBi 17.3 17.8
Beamwidth, Horizontal, degrees 99 95
Beamwidth, Vertical, degrees 5.1 4.8
Beam Tilt, degrees 2–12 2–12
USLS (First Lobe), dB 16 17
Front-to-Back Ratio at 180°, dB 30 30
Coupling level, Amp, Antenna port to Cal port, dB 26 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2 ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7 7
Isolation, Cross Polarization, dB 24 24
Isolation, Co-polarization, dB 18 18
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -130 -130
Input Power per Port at 50°C, maximum, watts 150 150

Electrical Specifications, Broadcast 65

Frequency Band, MHz 2300–2400 2496–2690
Gain, dBi 18.0 18.6
Beamwidth, Horizontal, degrees 65 65
Beamwidth, Vertical, degrees 5.1 4.8
Front-to-Back Total Power at 180° ± 30°, dB 31 32
USLS (First Lobe), dB 16 16

Electrical Specifications, Service Beam

Frequency Band, MHz 2300–2400 2496–2690
Steered 0° Gain, dBi 22.3 22.3
Steered 0° Beamwidth, Horizontal, degrees 27 26
Steered 0° Front-to-Back Total Power at 180° ± 30°, dB 33 33
Steered 0° Horizontal Sidelobe, dB 12 11
Steered 30° Gain, dBi 21.6 21.6
Steered 30° Beamwidth, Horizontal, degrees 30 28
Steered 30° Front-to-Back Total Power at 180° ± 30°, dB 31 31

Electrical Specifications, Soft Split

Frequency Band, MHz 2300–2400 2496–2690
Gain, dBi 20.7 21.0
Beamwidth, Horizontal, degrees 35 33
Front-to-Back Total Power at 180° ± 30°, dB 32 32
Horizontal Sidelobe, dB 22 20

Mechanical Specifications

Wind Loading @ Velocity, frontal 586.0 N @ 150 km/h (131.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 123.0 N @ 150 km/h (27.7 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,385.0 N @ 150 km/h (311.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 709.0 N @ 150 km/h (159.4 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 413 mm | 16.260 in
Depth, packed 257 mm | 10.118 in
Length, packed 1740 mm | 68.504 in
Weight, gross 25.5 kg | 56.218 lb

Regulatory Compliance/Certifications

Agency Classification
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Sector
Band Single band
Calibration Connector Interface MQ5
Calibration Connector Quantity 1
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material PVC, UV resistant
Reflector Material Aluminum
RF Connector Interface MQ4 | MQ5
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v1
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal Bias Tee Cal Port
Internal RET High band (1)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 307 mm | 12.087 in
Depth 118 mm | 4.646 in
Length 1610 mm | 63.386 in
Net Weight, without mounting kit 15.6 kg | 34.392 lb
TDD Column Spacing 58 mm | 2.283 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 2300 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 500 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 2300–2400 2496–2690
Gain, dBi 17.3 17.8
Beamwidth, Horizontal, degrees 99 95
Beamwidth, Vertical, degrees 5.1 4.8
Beam Tilt, degrees 2–12 2–12
USLS (First Lobe), dB 16 17
Front-to-Back Ratio at 180°, dB 30 30
Coupling level, Amp, Antenna port to Cal port, dB 26 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2 ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7 7
Isolation, Cross Polarization, dB 24 24
Isolation, Co-polarization, dB 18 18
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -130 -130
Input Power per Port at 50°C, maximum, watts 150 150

Electrical Specifications, Broadcast 65

Frequency Band, MHz 2300–2400 2496–2690
Gain, dBi 18.0 18.6
Beamwidth, Horizontal, degrees 65 65
Beamwidth, Vertical, degrees 5.1 4.8
Front-to-Back Total Power at 180° ± 30°, dB 31 32
USLS (First Lobe), dB 16 16

Electrical Specifications, Service Beam

Frequency Band, MHz 2300–2400 2496–2690
Steered 0° Gain, dBi 22.3 22.3
Steered 0° Beamwidth, Horizontal, degrees 27 26
Steered 0° Front-to-Back Total Power at 180° ± 30°, dB 33 33
Steered 0° Horizontal Sidelobe, dB 12 11
Steered 30° Gain, dBi 21.6 21.6
Steered 30° Beamwidth, Horizontal, degrees 30 28
Steered 30° Front-to-Back Total Power at 180° ± 30°, dB 31 31

Electrical Specifications, Soft Split

Frequency Band, MHz 2300–2400 2496–2690
Gain, dBi 20.7 21.0
Beamwidth, Horizontal, degrees 35 33
Front-to-Back Total Power at 180° ± 30°, dB 32 32
Horizontal Sidelobe, dB 22 20

Mechanical Specifications

Wind Loading @ Velocity, frontal 586.0 N @ 150 km/h (131.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 123.0 N @ 150 km/h (27.7 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,385.0 N @ 150 km/h (311.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 709.0 N @ 150 km/h (159.4 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 413 mm | 16.260 in
Depth, packed 257 mm | 10.118 in
Length, packed 1740 mm | 68.504 in
Weight, gross 25.5 kg | 56.218 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
UK-ROHS Compliant/Exempted

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification