Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

KKSS-65A-R2

8-port sector antenna, 4x 617-960MHz, 4x 3100-4000 MHz, 65deg HPBW, 2x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, low band 4
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (1) | Low band (1)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 1499 mm | 59.016 in

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 617 – 960 MHz | 3100 – 4000 MHz
Polarization ±45°
Total Input Power, maximum 800 W @ 50 °C

Electrical Specifications

R1,R2 R1,R2 R1,R2 R1,R2 P1,P2 P1,P2 P1,P2 P1,P2
Frequency Band, MHz 617–698 698–806 806–894 880–960 3100–3300 3300–3550 3550–3700 3700–4000
RF Port 1,2,3,4 1,2,3,4 1,2,3,4 1,2,3,4 5,6,7,8 5,6,7,8 5,6,7,8 5,6,7,8
Gain, dBi 13.2 13.3 13.8 14.1 17.0 17.1 17.1 16.8
Beamwidth, Horizontal, degrees 67 59 59 60 55 54 60 62
Beamwidth, Vertical, degrees 18.3 16.6 14.9 13.8 7.2 6.8 6.5 6.3
Beam Tilt, degrees 4–18 4–18 4–18 4–18 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 15 16 15 17 18 17 16 17
Front-to-Back Ratio at 180°, dB 27 27 27 29 30 31 30 29
Front-to-Back Total Power at 180° ± 30°, dB 21 21 22 22 26 25 24 23
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -145 -145 -145 -145
Input Power per Port at 50°C, maximum, watts 250 250 250 250 150 150 150 150

Mechanical Specifications

Wind Loading @ Velocity, frontal 498.0 N @ 150 km/h (112.0 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 148.0 N @ 150 km/h (33.3 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 597.0 N @ 150 km/h (134.2 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 342.0 N @ 150 km/h (76.9 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Environmental Specifications

Operating Temperature -40 °C to +70 °C (-40 °F to +158 °F)

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 309 mm | 12.165 in
Length, packed 1686 mm | 66.378 in
Weight, gross 36.9 kg | 81.350 lb
Weight, net 25 kg | 55.116 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, low band 4
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (1) | Low band (1)
Power Consumption, active state, maximum 8 W
Power Consumption, idle state, maximum 1 W
Protocol 3GPP/AISG 2.0

Dimensions

Width 498 mm | 19.606 in
Depth 197 mm | 7.756 in
Length 1499 mm | 59.016 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 617 – 960 MHz | 3100 – 4000 MHz
Polarization ±45°
Total Input Power, maximum 800 W @ 50 °C

Electrical Specifications

R1,R2 R1,R2 R1,R2 R1,R2 P1,P2 P1,P2 P1,P2 P1,P2
Frequency Band, MHz 617–698 698–806 806–894 880–960 3100–3300 3300–3550 3550–3700 3700–4000
RF Port 1,2,3,4 1,2,3,4 1,2,3,4 1,2,3,4 5,6,7,8 5,6,7,8 5,6,7,8 5,6,7,8
Gain, dBi 13.2 13.3 13.8 14.1 17.0 17.1 17.1 16.8
Beamwidth, Horizontal, degrees 67 59 59 60 55 54 60 62
Beamwidth, Vertical, degrees 18.3 16.6 14.9 13.8 7.2 6.8 6.5 6.3
Beam Tilt, degrees 4–18 4–18 4–18 4–18 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 15 16 15 17 18 17 16 17
Front-to-Back Ratio at 180°, dB 27 27 27 29 30 31 30 29
Front-to-Back Total Power at 180° ± 30°, dB 21 21 22 22 26 25 24 23
Isolation, Cross Polarization, dB 25 25 25 25 25 25 25 25
Isolation, Inter-band, dB 25 25 25 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -145 -145 -145 -145
Input Power per Port at 50°C, maximum, watts 250 250 250 250 150 150 150 150

Mechanical Specifications

Wind Loading @ Velocity, frontal 498.0 N @ 150 km/h (112.0 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 148.0 N @ 150 km/h (33.3 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 597.0 N @ 150 km/h (134.2 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 342.0 N @ 150 km/h (76.9 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Environmental Specifications

Operating Temperature -40 °C to +70 °C (-40 °F to +158 °F)

Packaging and Weights

Width, packed 565 mm | 22.244 in
Depth, packed 309 mm | 12.165 in
Length, packed 1686 mm | 66.378 in
Weight, gross 36.9 kg | 81.350 lb
Weight, net 25 kg | 55.116 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification