1. Home
  2. Product Type
  3. Antennas
  4. Base Station Antennas & Equipment
  5. Base Station Antennas
  6. LNX-6515DS-A1M
Warning Icon
This product was discontinued on: November 30, 2023

For other alternatives, please contact us for more information.

0 Replacement products available

LNX-6515DS-A1M

2-port sector antenna, 2x 698–896 MHz, 65° HPBW, 1x RET

Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Excellent choice to maximize both coverage and capacity in suburban and rural applications
  • Fully compatible with Andrew remote electrical tilt system for greater OpEx savings
  • Exceptional horizontal pattern roll-off and strong front-to-back ratio
  • Extended bandwidth allows one antenna to serve multiple frequency allocations
  • Great solution to maximize network coverage and capacity
  • The RF connectors are designed for IP67 rating and the radome for IP56 rating

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 0
RF Connector Quantity, mid band 0
RF Connector Quantity, low band 2
RF Connector Quantity, total 2

Dimensions

Width 301 mm | 11.85 in
Depth 180.5 mm | 7.106 in
Length 2650 mm | 104.331 in
Net Weight, without mounting kit 20.2 kg | 44.533 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 896 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 698–806 806–896
Gain, dBi 16.7 17.6
Beamwidth, Horizontal, degrees 65 64
Beamwidth, Vertical, degrees 9.7 8.6
Beam Tilt, degrees 0–8 0–8
USLS (First Lobe), dB 17 17
Front-to-Back Ratio at 180°, dB 32 27
Isolation, Cross Polarization, dB 30 30
VSWR | Return loss, dB 1.4 | 15.6 1.4 | 15.6
PIM, 3rd Order, 2 x 20 W, dBc -153 -153
Input Power per Port, maximum, watts 400 400

Mechanical Specifications

Wind Loading @ Velocity, frontal 396.0 N @ 150 km/h (89.0 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 333.0 N @ 150 km/h (74.9 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 762.0 N @ 150 km/h (171.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 401.0 N @ 150 km/h (90.1 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 411 mm | 16.181 in
Depth, packed 284 mm | 11.181 in
Length, packed 2765 mm | 108.858 in
Weight, gross 40.5 kg | 89.287 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
UK-ROHS Compliant

General Specifications

Antenna Type Sector
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 0
RF Connector Quantity, mid band 0
RF Connector Quantity, low band 2
RF Connector Quantity, total 2

Dimensions

Width 301 mm | 11.85 in
Depth 180.5 mm | 7.106 in
Length 2650 mm | 104.331 in
Net Weight, without mounting kit 20.2 kg | 44.533 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 896 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 698–806 806–896
Gain, dBi 16.7 17.6
Beamwidth, Horizontal, degrees 65 64
Beamwidth, Vertical, degrees 9.7 8.6
Beam Tilt, degrees 0–8 0–8
USLS (First Lobe), dB 17 17
Front-to-Back Ratio at 180°, dB 32 27
Isolation, Cross Polarization, dB 30 30
VSWR | Return loss, dB 1.4 | 15.6 1.4 | 15.6
PIM, 3rd Order, 2 x 20 W, dBc -153 -153
Input Power per Port, maximum, watts 400 400

Mechanical Specifications

Wind Loading @ Velocity, frontal 396.0 N @ 150 km/h (89.0 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 333.0 N @ 150 km/h (74.9 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 762.0 N @ 150 km/h (171.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 401.0 N @ 150 km/h (90.1 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 411 mm | 16.181 in
Depth, packed 284 mm | 11.181 in
Length, packed 2765 mm | 108.858 in
Weight, gross 40.5 kg | 89.287 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
UK-ROHS Compliant