NNSS-45B-R1BT4
8-Port sector antenna, 4x698-896 and 4x3300-4000MHz, 45° HPBW,1xRET and 1xSBT
Features and Benefits
- Features broadband Low Band (698-896 MHz) array for 4T4R (4X MIMO) capability for Band 14
- Perfect antenna to add 3.5GHz CBRS to macro sites
- Excellent wind loading characteristics
- Internal SBT on low band allow remote RET control from the radio over the RF jumper cable
Specifications
General Specifications
| Antenna Type | Sector |
| Band | Multiband |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Low loss circuit board |
| Reflector Material | Aluminum |
| RF Connector Interface | 4.3-10 Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 4 |
| RF Connector Quantity, low band | 4 |
| RF Connector Quantity, total | 8 |
Remote Electrical Tilt (RET) Information
| RET Hardware | CommRET v2 |
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 1 female | 1 male |
| Input Voltage | 10–30 Vdc |
| Internal Bias Tee | Port 1 |
| Internal RET | Low band (1) |
| Power Consumption, active state, maximum | 10 W |
| Power Consumption, idle state, maximum | 2 W |
| Protocol | 3GPP/AISG 2.0 |
Dimensions
| Width | 640 mm | 25.197 in |
| Depth | 235 mm | 9.252 in |
| Length | 1828 mm | 71.969 in |
| Net Weight, antenna only | 44.2 kg | 97.444 lb |
Array Layout
| Click on image to enlarge. |
Port Configuration
| Click on image to enlarge. |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 698 – 896 MHz | 3300 – 4000 MHz |
| Polarization | ±45° |
| Total Input Power, maximum | 900 W @ 50 °C |
Electrical Specifications
| R1,R2 | R1,R2 | P1,P2 | P1,P2 | P1,P2 | |
| Frequency Band, MHz | 698–806 | 806–896 | 3300–3550 | 3550–3700 | 3700–4000 |
| RF Port | 1,2,3,4 | 1,2,3,4 | 5,6,7,8 | 5,6,7,8 | 5,6,7,8 |
| Gain, dBi | 15.5 | 16.2 | 16.7 | 16.6 | 17.3 |
| Beamwidth, Horizontal, degrees | 51 | 43 | 43 | 44 | 42 |
| Beamwidth, Vertical, degrees | 11.9 | 10.6 | 9.3 | 9 | 8.9 |
| Beam Tilt, degrees | 2–14 | 2–14 | 4 | 4 | 4 |
| USLS (First Lobe), dB | 12 | 15 | 16 | 16 | 15 |
| Front-to-Back Ratio at 180°, dB | 32 | 34 | 33 | 32 | 30 |
| Isolation, Cross Polarization, dB | 25 | 25 | 25 | 25 | 25 |
| Isolation, Inter-band, dB | 25 | 25 | 25 | 25 | 25 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -153 | -153 | -145 | -145 | -145 |
| Input Power per Port at 50°C, maximum, watts | 300 | 300 | 100 | 100 | 100 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 698–806 | 806–896 | 3300–3550 | 3550–3700 | 3700–4000 |
| Gain by all Beam Tilts, average, dBi | 15.1 | 16.0 | 16.4 | 16.4 | 16.9 |
| Gain by all Beam Tilts Tolerance, dB | ±0.8 | ±0.4 | ±0.5 | ±0.4 | ±0.6 |
| Beamwidth, Horizontal Tolerance, degrees | ±6 | ±5 | ±6 | ±5 | ±3 |
| Beamwidth, Vertical Tolerance, degrees | ±0.8 | ±0.5 | ±0.5 | ±0.6 | ±0.6 |
| USLS, beampeak to 20° above beampeak, dB | 12 | 15 | 14 | 15 | 15 |
| Front-to-Back Total Power at 180° ± 30°, dB | 20 | 22 | 27 | 26 | 23 |
| CPR at Boresight, dB | 19 | 20 | 12 | 14 | 17 |
| CPR at Sector, dB | 5 | 6 | 8 | 4 | 3 |
Mechanical Specifications
| Wind Loading @ Velocity, frontal | 715.0 N @ 150 km/h (160.7 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 206.0 N @ 150 km/h (46.3 lbf @ 150 km/h) |
| Wind Loading @ Velocity, maximum | 911.0 N @ 150 km/h (204.8 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 446.0 N @ 150 km/h (100.3 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 752 mm | 29.606 in |
| Depth, packed | 387 mm | 15.236 in |
| Length, packed | 1982 mm | 78.032 in |
| Weight, gross | 60 kg | 132.277 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant/Exempted |
CHINA-ROHS
|
Above maximum concentration value |
| UK-ROHS | Compliant/Exempted |
General Specifications
| Antenna Type | Sector |
| Band | Multiband |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | Fiberglass, UV resistant |
| Radiator Material | Low loss circuit board |
| Reflector Material | Aluminum |
| RF Connector Interface | 4.3-10 Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, high band | 4 |
| RF Connector Quantity, low band | 4 |
| RF Connector Quantity, total | 8 |
Remote Electrical Tilt (RET) Information
| RET Hardware | CommRET v2 |
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 1 female | 1 male |
| Input Voltage | 10–30 Vdc |
| Internal Bias Tee | Port 1 |
| Internal RET | Low band (1) |
| Power Consumption, active state, maximum | 10 W |
| Power Consumption, idle state, maximum | 2 W |
| Protocol | 3GPP/AISG 2.0 |
Dimensions
| Width | 640 mm | 25.197 in |
| Depth | 235 mm | 9.252 in |
| Length | 1828 mm | 71.969 in |
| Net Weight, antenna only | 44.2 kg | 97.444 lb |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 698 – 896 MHz | 3300 – 4000 MHz |
| Polarization | ±45° |
| Total Input Power, maximum | 900 W @ 50 °C |
Electrical Specifications
| R1,R2 | R1,R2 | P1,P2 | P1,P2 | P1,P2 | |
| Frequency Band, MHz | 698–806 | 806–896 | 3300–3550 | 3550–3700 | 3700–4000 |
| RF Port | 1,2,3,4 | 1,2,3,4 | 5,6,7,8 | 5,6,7,8 | 5,6,7,8 |
| Gain, dBi | 15.5 | 16.2 | 16.7 | 16.6 | 17.3 |
| Beamwidth, Horizontal, degrees | 51 | 43 | 43 | 44 | 42 |
| Beamwidth, Vertical, degrees | 11.9 | 10.6 | 9.3 | 9 | 8.9 |
| Beam Tilt, degrees | 2–14 | 2–14 | 4 | 4 | 4 |
| USLS (First Lobe), dB | 12 | 15 | 16 | 16 | 15 |
| Front-to-Back Ratio at 180°, dB | 32 | 34 | 33 | 32 | 30 |
| Isolation, Cross Polarization, dB | 25 | 25 | 25 | 25 | 25 |
| Isolation, Inter-band, dB | 25 | 25 | 25 | 25 | 25 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -153 | -153 | -145 | -145 | -145 |
| Input Power per Port at 50°C, maximum, watts | 300 | 300 | 100 | 100 | 100 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 698–806 | 806–896 | 3300–3550 | 3550–3700 | 3700–4000 |
| Gain by all Beam Tilts, average, dBi | 15.1 | 16.0 | 16.4 | 16.4 | 16.9 |
| Gain by all Beam Tilts Tolerance, dB | ±0.8 | ±0.4 | ±0.5 | ±0.4 | ±0.6 |
| Beamwidth, Horizontal Tolerance, degrees | ±6 | ±5 | ±6 | ±5 | ±3 |
| Beamwidth, Vertical Tolerance, degrees | ±0.8 | ±0.5 | ±0.5 | ±0.6 | ±0.6 |
| USLS, beampeak to 20° above beampeak, dB | 12 | 15 | 14 | 15 | 15 |
| Front-to-Back Total Power at 180° ± 30°, dB | 20 | 22 | 27 | 26 | 23 |
| CPR at Boresight, dB | 19 | 20 | 12 | 14 | 17 |
| CPR at Sector, dB | 5 | 6 | 8 | 4 | 3 |
Mechanical Specifications
| Wind Loading @ Velocity, frontal | 715.0 N @ 150 km/h (160.7 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 206.0 N @ 150 km/h (46.3 lbf @ 150 km/h) |
| Wind Loading @ Velocity, maximum | 911.0 N @ 150 km/h (204.8 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 446.0 N @ 150 km/h (100.3 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 752 mm | 29.606 in |
| Depth, packed | 387 mm | 15.236 in |
| Length, packed | 1982 mm | 78.032 in |
| Weight, gross | 60 kg | 132.277 lb |
| Click on image to enlarge. |
| Click on image to enlarge. |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant/Exempted |
|
CHINA-ROHS
|
Above maximum concentration value |
| UK-ROHS | Compliant/Exempted |
Documentation & Downloads
Assembly Drawing
Installation Instruction
Product Information
Product Specification
Warranty
Assembly Drawing
Installation Instruction
Product Compliance Documentation
Product Information
Product Specification
Warranty
Related Products and Accessories
Included Products
Antennas
-
![]()
BSAMNT-4 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Structural Support, Tools & Accessories
-
![]()
BSAMNT-4 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
-
![]()
BSAMNT-4 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Included Products
Antennas
-
![]()
BSAMNT-4 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Structural Support, Tools & Accessories
-
![]()
BSAMNT-4 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
-
![]()
BSAMNT-4 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
Other Ways to Browse
