For other alternatives, please contact us for more information.

0 Alternative products available

NHHSS-45C-R2BT4

10-port sector antenna, 2x 698–896, 4x 1695–2200 MHz and 4x 3100-4200, 45° HPBW, 2x RETs and 2x SBTs. Both high bands share the same electrical tilt.

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Features and Benefits

Perfect antenna to add 3.5GHz CBRS to macro sites
Low band and mid band performance mirrors the performance of existing NHH hex port antennas
Internal SBT on low and high band allow remote RET control from the radio over the RF jumper cable
Separate RS-485 RET input/output for low and high band
Interleaved dipole technology providing for attractive, low wind load mechanical package
One LB RET and one HB RET. Both high bands are controlled by one RET to ensure same tilt level for 4x MIMO

Specifications

General Specifications

Antenna Type	Sector
Band	Multiband
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Radiator Material	Aluminum \| Low loss circuit board
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, high band	4
RF Connector Quantity, mid band	4
RF Connector Quantity, low band	2
RF Connector Quantity, total	10

Remote Electrical Tilt (RET) Information

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	2 female \| 2 male
Input Voltage	10–30 Vdc
Internal RET	Low band (1) \| Mid band (1)
Power Consumption, active state, maximum	10 W
Power Consumption, idle state, maximum	2 W
Protocol	3GPP/AISG 2.0

Dimensions

Width	457 mm \| 17.992 in
Depth	178 mm \| 7.008 in
Length	2437 mm \| 95.945 in
Net Weight, without mounting kit	41.5 kg \| 91.492 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	698 – 896 MHz \| 1695 – 2200 MHz \| 3100 – 4200 MHz
Polarization	±45°
Total Input Power, maximum	1,000 W @ 50 °C

Electrical Specifications

Frequency Band, MHz	698–806	806–896	1695–1880	1850–1990	1920–2200	3100–3550	3550–3700	3700–4200
Gain, dBi	18.0	18.6	19.3	19.7	20.3	16.9	17.4	17.4
Beamwidth, Horizontal, degrees	46	41	45	43	41	49	42	40
Beamwidth, Vertical, degrees	9.3	8.2	5.7	5.4	5.1	9.7	9	8.4
Beam Tilt, degrees	0–10	0–10	0–8	0–8	0–8	4	4	4
USLS (First Lobe), dB	18	22	15	16	16	18	17	13
Front-to-Back Ratio at 180°, dB	32	34	33	34	36	32	33	29
Isolation, Cross Polarization, dB	25	25	25	25	25	25	25	25
Isolation, Inter-band, dB	30	30	28	28	28	28	28	28
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-153	-153	-153	-153	-153	-140	-140	-140
Input Power per Port at 50°C, maximum, watts	250	250	250	250	250	100	100	100

Electrical Specifications, BASTA

Frequency Band, MHz	698–806	806–896	1695–1880	1850–1990	1920–2200	3100–3550	3550–3700	3700–4200
Gain by all Beam Tilts, average, dBi	17.6	18.4	18.9	19.5	19.8	16.4	17.1	17.0
Gain by all Beam Tilts Tolerance, dB	±0.8	±0.3	±0.8	±0.4	±0.5	±0.6	±0.5	±0.6
Beamwidth, Horizontal Tolerance, degrees	±2	±1.7	±2.8	±1.9	±2.2	±7	±3.6	±3.2
Beamwidth, Vertical Tolerance, degrees	±0.6	±0.3	±0.3	±0.2	±0.4	±0.9	±0.8	±0.8
USLS, beampeak to 20° above beampeak, dB	16	15	15	15	15	17	16	13
Front-to-Back Total Power at 180° ± 30°, dB	24	25	24	26	27	26	25	20
CPR at Boresight, dB	20	21	19	19	17	14	16	17
CPR at Sector, dB	13	10	3	3	4	5	8	5

Mechanical Specifications

Wind Loading @ Velocity, frontal	1,485.0 N @ 150 km/h (333.8 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	315.0 N @ 150 km/h (70.8 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	1,485.0 N @ 150 km/h (333.8 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	1,304.0 N @ 150 km/h (293.2 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Packaging and Weights

Width, packed	563 mm \| 22.165 in
Depth, packed	355 mm \| 13.976 in
Length, packed	2610 mm \| 102.756 in
Weight, gross	61.2 kg \| 134.923 lb

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant/Exempted
CHINA-ROHS	Above maximum concentration value
UK-ROHS	Compliant/Exempted

General Specifications

Antenna Type	Sector
Band	Multiband
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Radiator Material	Aluminum \| Low loss circuit board
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, high band	4
RF Connector Quantity, mid band	4
RF Connector Quantity, low band	2
RF Connector Quantity, total	10

Remote Electrical Tilt (RET) Information

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	2 female \| 2 male
Input Voltage	10–30 Vdc
Internal RET	Low band (1) \| Mid band (1)
Power Consumption, active state, maximum	10 W
Power Consumption, idle state, maximum	2 W
Protocol	3GPP/AISG 2.0

Dimensions

Width	457 mm \| 17.992 in
Depth	178 mm \| 7.008 in
Length	2437 mm \| 95.945 in
Net Weight, without mounting kit	41.5 kg \| 91.492 lb

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	698 – 896 MHz \| 1695 – 2200 MHz \| 3100 – 4200 MHz
Polarization	±45°
Total Input Power, maximum	1,000 W @ 50 °C

Electrical Specifications

Frequency Band, MHz	698–806	806–896	1695–1880	1850–1990	1920–2200	3100–3550	3550–3700	3700–4200
Gain, dBi	18.0	18.6	19.3	19.7	20.3	16.9	17.4	17.4
Beamwidth, Horizontal, degrees	46	41	45	43	41	49	42	40
Beamwidth, Vertical, degrees	9.3	8.2	5.7	5.4	5.1	9.7	9	8.4
Beam Tilt, degrees	0–10	0–10	0–8	0–8	0–8	4	4	4
USLS (First Lobe), dB	18	22	15	16	16	18	17	13
Front-to-Back Ratio at 180°, dB	32	34	33	34	36	32	33	29
Isolation, Cross Polarization, dB	25	25	25	25	25	25	25	25
Isolation, Inter-band, dB	30	30	28	28	28	28	28	28
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-153	-153	-153	-153	-153	-140	-140	-140
Input Power per Port at 50°C, maximum, watts	250	250	250	250	250	100	100	100

Electrical Specifications, BASTA

Frequency Band, MHz	698–806	806–896	1695–1880	1850–1990	1920–2200	3100–3550	3550–3700	3700–4200
Gain by all Beam Tilts, average, dBi	17.6	18.4	18.9	19.5	19.8	16.4	17.1	17.0
Gain by all Beam Tilts Tolerance, dB	±0.8	±0.3	±0.8	±0.4	±0.5	±0.6	±0.5	±0.6
Beamwidth, Horizontal Tolerance, degrees	±2	±1.7	±2.8	±1.9	±2.2	±7	±3.6	±3.2
Beamwidth, Vertical Tolerance, degrees	±0.6	±0.3	±0.3	±0.2	±0.4	±0.9	±0.8	±0.8
USLS, beampeak to 20° above beampeak, dB	16	15	15	15	15	17	16	13
Front-to-Back Total Power at 180° ± 30°, dB	24	25	24	26	27	26	25	20
CPR at Boresight, dB	20	21	19	19	17	14	16	17
CPR at Sector, dB	13	10	3	3	4	5	8	5

Mechanical Specifications

Wind Loading @ Velocity, frontal	1,485.0 N @ 150 km/h (333.8 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	315.0 N @ 150 km/h (70.8 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	1,485.0 N @ 150 km/h (333.8 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	1,304.0 N @ 150 km/h (293.2 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Packaging and Weights

Width, packed	563 mm \| 22.165 in
Depth, packed	355 mm \| 13.976 in
Length, packed	2610 mm \| 102.756 in
Weight, gross	61.2 kg \| 134.923 lb

Click on image to enlarge.

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant/Exempted
CHINA-ROHS	Above maximum concentration value
UK-ROHS	Compliant/Exempted