Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

NNHH-45C-R4

8-port sector antenna, 4x 698–896 and 4x 1695–2360 MHz, 45° HPBW, 4x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Independent tilt for all arrays
  • Optimized SPR performance across all operating bands
  • Excellent wind loading characteristics

General Specifications

Antenna Type Sector with internal RET
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, low band 4
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (2) | Low band (2)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Multi-RET)

Dimensions

Width 640 mm | 25.197 in
Depth 235 mm | 9.252 in
Length 2437 mm | 95.945 in
Net Weight, antenna only 61 kg | 134.482 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 896 MHz | 1695 – 2360 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

R1,R2 R1,R2 Y1,Y2 Y1,Y2 Y1,Y2 Y1,Y2
Frequency Band, MHz 698–806 806–896 1695–1880 1850–1990 1920–2180 2300–2360
RF Port 1,2,3,4 1,2,3,4 5,6,7,8 5,6,7,8 5,6,7,8 5,6,7,8
Gain, dBi 16.4 17.1 18.8 19.2 20.0 20.5
Gain at Mid Tilt, dBi 16.0 17.0 18.4 19.1 19.6 20.5
Beamwidth, Horizontal, degrees 51 45 46 49 47 38
Beamwidth, Vertical, degrees 9.6 8.4 5.7 5.3 5 4.5
Beam Tilt, degrees 2–14 2–14 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 14 15 15 16 16 18
Front-to-Back Ratio, Copolarization 180° ± 30°, dB 28 30 26 26 27 26
Isolation, Cross Polarization, dB 25 25 25 25 25 25
Isolation, Inter-band, dB -25 -25 -25 -25 -25 -25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150
Input Power per Port, maximum, watts 350 350 300 300 300 250

Mechanical Specifications

Wind Loading @ Velocity, frontal 954.0 N @ 150 km/h (214.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 355.0 N @ 150 km/h (79.8 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,434.0 N @ 150 km/h (322.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 1,086.0 N @ 150 km/h (244.1 lbf @ 150 km/h)
Wind Speed, maximum 241.4 km/h (150 mph)

Packaging and Weights

Width, packed 752 mm | 29.606 in
Depth, packed 382 mm | 15.039 in
Length, packed 2590 mm | 101.969 in
Weight, gross 79.2 kg | 174.606 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
UK-ROHS Compliant

General Specifications

Antenna Type Sector with internal RET
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, low band 4
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (2) | Low band (2)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Multi-RET)

Dimensions

Width 640 mm | 25.197 in
Depth 235 mm | 9.252 in
Length 2437 mm | 95.945 in
Net Weight, antenna only 61 kg | 134.482 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 896 MHz | 1695 – 2360 MHz
Polarization ±45°
Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications

R1,R2 R1,R2 Y1,Y2 Y1,Y2 Y1,Y2 Y1,Y2
Frequency Band, MHz 698–806 806–896 1695–1880 1850–1990 1920–2180 2300–2360
RF Port 1,2,3,4 1,2,3,4 5,6,7,8 5,6,7,8 5,6,7,8 5,6,7,8
Gain, dBi 16.4 17.1 18.8 19.2 20.0 20.5
Gain at Mid Tilt, dBi 16.0 17.0 18.4 19.1 19.6 20.5
Beamwidth, Horizontal, degrees 51 45 46 49 47 38
Beamwidth, Vertical, degrees 9.6 8.4 5.7 5.3 5 4.5
Beam Tilt, degrees 2–14 2–14 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 14 15 15 16 16 18
Front-to-Back Ratio, Copolarization 180° ± 30°, dB 28 30 26 26 27 26
Isolation, Cross Polarization, dB 25 25 25 25 25 25
Isolation, Inter-band, dB -25 -25 -25 -25 -25 -25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150
Input Power per Port, maximum, watts 350 350 300 300 300 250

Mechanical Specifications

Wind Loading @ Velocity, frontal 954.0 N @ 150 km/h (214.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 355.0 N @ 150 km/h (79.8 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 1,434.0 N @ 150 km/h (322.4 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 1,086.0 N @ 150 km/h (244.1 lbf @ 150 km/h)
Wind Speed, maximum 241.4 km/h (150 mph)

Packaging and Weights

Width, packed 752 mm | 29.606 in
Depth, packed 382 mm | 15.039 in
Length, packed 2590 mm | 101.969 in
Weight, gross 79.2 kg | 174.606 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
UK-ROHS Compliant

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification