Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

T4-90B-R1-V4

8-Port Beamforming Antenna, 2300–2690 MHz, 1xRET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • For use in beamforming systems for 2300-2690 MHz with calibration ports

General Specifications

Antenna Type Sector and beamforming
Band Single band
Calibration Connector Interface M-LOC
Calibration Connector Quantity 1
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface M-LOC
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (1)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0

Dimensions

Width 407 mm | 16.024 in
Depth 120 mm | 4.724 in
Length 1829 mm | 72.008 in
Net Weight, without mounting kit 23.3 kg | 51.368 lb

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 2300 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 700 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 2300–2400 2496–2690
Beam Tilt, degrees 0–8 0–8
Coupling level, Amp, Antenna port to Cal port, dB 26 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2 ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7 7
Isolation, Cross Polarization, dB 25 25
Isolation, Co-polarization, dB 20 20
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150
Input Power per Port at 50°C, maximum, watts 150 150

Electrical Specifications, Broadcast 65

Frequency Band, MHz 2300–2400 2496–2690
Gain, dBi 17.6 17.6
Beamwidth, Vertical, degrees 4.2 4.0
CPR at Boresight, dB 18 17
CPR at Sector, dB 16 11
Front-to-Back Total Power at 180° ± 30°, dB 25 22
USLS (First Lobe), dB 22 22

Electrical Specifications, Envelope Pattern

Frequency Band, MHz 2300–2400 2496–2690
Gain, dBi 24.0 24.1
Beamwidth, Horizontal at 10 dB, degrees 145 123
Front-to-Back Total Power at 180° ± 30°, dB 30 29
USLS (First Lobe), dB 25 27

Electrical Specifications, Service Beam

Frequency Band, MHz 2300–2400 2496–2690
Steered 13° Gain, dBi 24.0 24.1
Steered 13° Gain Tolerance, dBi ±0.2 ±0.4
Steered 13° Beamwidth, Horizontal, degrees 20 18
Steered 13° CPR at Beampeak, dB 18 17
Steered 13° Front-to-Back Total Power at 180° ± 30°, dB 33 32
Steered 13° Horizontal Sidelobe, dB 18 19
Steered 13° USLS (First Lobe), dB 24 28
Steered 42° Gain, dBi 22.0 22.0
Steered 42° Gain Tolerance, dBi ±0.3 ±0.5
Steered 42° Beamwidth, Horizontal, degrees 26 22
Steered 42° CPR at Beampeak, dB 18 14
Steered 42° Front-to-Back Total Power at 180° ± 30°, dB 29 28
Steered 42° Horizontal Sidelobe, dB 14 14
Steered 42° USLS (First Lobe), dB 22 22

Mechanical Specifications

Wind Loading @ Velocity, frontal 1,063.0 N @ 150 km/h (239.0 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 158.0 N @ 150 km/h (35.5 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 1,063.0 N @ 150 km/h (239.0 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 545 mm | 21.457 in
Depth, packed 302 mm | 11.890 in
Length, packed 1961 mm | 77.205 in
Weight, gross 34 kg | 74.957 lb

Regulatory Compliance/Certifications

Agency Classification
AISG Compliant

General Specifications

Antenna Type Sector and beamforming
Band Single band
Calibration Connector Interface M-LOC
Calibration Connector Quantity 1
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface M-LOC
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, total 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (1)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0

Dimensions

Width 407 mm | 16.024 in
Depth 120 mm | 4.724 in
Length 1829 mm | 72.008 in
Net Weight, without mounting kit 23.3 kg | 51.368 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 2300 – 2690 MHz
Polarization ±45°
Total Input Power, maximum 700 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 2300–2400 2496–2690
Beam Tilt, degrees 0–8 0–8
Coupling level, Amp, Antenna port to Cal port, dB 26 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2 ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7 7
Isolation, Cross Polarization, dB 25 25
Isolation, Co-polarization, dB 20 20
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150
Input Power per Port at 50°C, maximum, watts 150 150

Electrical Specifications, Broadcast 65

Frequency Band, MHz 2300–2400 2496–2690
Gain, dBi 17.6 17.6
Beamwidth, Vertical, degrees 4.2 4.0
CPR at Boresight, dB 18 17
CPR at Sector, dB 16 11
Front-to-Back Total Power at 180° ± 30°, dB 25 22
USLS (First Lobe), dB 22 22

Electrical Specifications, Envelope Pattern

Frequency Band, MHz 2300–2400 2496–2690
Gain, dBi 24.0 24.1
Beamwidth, Horizontal at 10 dB, degrees 145 123
Front-to-Back Total Power at 180° ± 30°, dB 30 29
USLS (First Lobe), dB 25 27

Electrical Specifications, Service Beam

Frequency Band, MHz 2300–2400 2496–2690
Steered 13° Gain, dBi 24.0 24.1
Steered 13° Gain Tolerance, dBi ±0.2 ±0.4
Steered 13° Beamwidth, Horizontal, degrees 20 18
Steered 13° CPR at Beampeak, dB 18 17
Steered 13° Front-to-Back Total Power at 180° ± 30°, dB 33 32
Steered 13° Horizontal Sidelobe, dB 18 19
Steered 13° USLS (First Lobe), dB 24 28
Steered 42° Gain, dBi 22.0 22.0
Steered 42° Gain Tolerance, dBi ±0.3 ±0.5
Steered 42° Beamwidth, Horizontal, degrees 26 22
Steered 42° CPR at Beampeak, dB 18 14
Steered 42° Front-to-Back Total Power at 180° ± 30°, dB 29 28
Steered 42° Horizontal Sidelobe, dB 14 14
Steered 42° USLS (First Lobe), dB 22 22

Mechanical Specifications

Wind Loading @ Velocity, frontal 1,063.0 N @ 150 km/h (239.0 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 158.0 N @ 150 km/h (35.5 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 1,063.0 N @ 150 km/h (239.0 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 545 mm | 21.457 in
Depth, packed 302 mm | 11.890 in
Length, packed 1961 mm | 77.205 in
Weight, gross 34 kg | 74.957 lb
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
AISG Compliant

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification