For other alternatives, please contact us for more information.

0 Alternative products available

E14R00P67

Tri Band Tower Mounted Amplifier, 1800/2100/2600 MHz, 12 dB, 4 BTS & 4 ANT ports, AISG with 1 RET connector (1 device with 2 sub-units each), with 4.3-10 connectors, 700-900 & 1400 MHz Bypass

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Download

Features and Benefits

Industry leading PIM performance
New 4.3-10 connectors for improved PIM performance and size reduction
Designed to boost UP-Link Coverage and KPIs
4 input ports and 4 output ports
1 device with 2 sub-units
TMA is operating in AISG mode
TMA with 1350-1525 MHz bypass
TMA with 698-960 MHz bypass

Specifications

Product Classification

Product Type

4-BTS:4-ANT (Quadplex)

General Specifications

Color	Gray
Modularity	2-Twin
Mounting	Pole \| Wall
Mounting Pipe Hardware	Band clamps (2)
RF Connector Interface	4.3-10 Female

Dimensions

Height	316 mm \| 12.441 in
Width	300 mm \| 11.811 in
Depth	125 mm \| 4.921 in
Mounting Pipe Diameter Range	42.6–122 mm

Outline Drawing

Click on image to enlarge.

Electrical Specifications

License Band, LNA

DCS 1800 | IMT 2100 | IMT 2600

Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy	Yes
Lightning Surge Current	10 kA
Lightning Surge Current Waveform	8/20 waveform

Electrical Specifications, AISG

AISG Connector	8-pin DIN Female
AISG Connector Standard	IEC 60130-9
Protocol	AISG 2.0
Voltage, AISG Mode	10–30 Vdc

Electrical Specifications

Sub-module	1 \| 2	1 \| 2	1 \| 2
Branch	1	2	3
Port Designation	ANT	ANT	ANT
License Band	DCS 1800, LNA	IMT 2100, LNA	IMT 2600, LNA

Electrical Specifications, Band Pass

Frequency Range, MHz	698–960	1350–1525
Insertion Loss, typical, dB	0.20	0.20
Total Group Delay, typical, ns	5	15
Return Loss, typical, dB	19	20
Input Power, RMS, maximum, W	200	200
Input Power, PEP, maximum, W	1,000	1,000
3rd Order PIM, typical, dBc	-160	-160
3rd Order PIM Test Method	Two +43 dBm carriers	Two +43 dBm carriers

Electrical Specifications, Rx Uplink

Frequency Range, MHz	1710–1785	1920–1980	2500–2570
Bandwidth, MHz	75.00	60.00	70.00
Gain, nominal, dB	12.0	12.0	12.0
Noise Figure, typical, dB	1.4	1.5	1.5
Total Group Delay, typical, ns	120	60	60
Return Loss, typical, dB	20	20	20
Insertion Loss - Bypass Mode, typical, dB	2.2	2.0	2.3
Return Loss - Bypass Mode, typical, dB	16	16	16

Electrical Specifications, Tx Downlink

Frequency Range, MHz	1805–1880	2110–2170	2620–2690
Bandwidth, MHz	75.00	60.00	70.00
Insertion Loss, typical, dB	0.50	0.35	0.45
Total Group Delay, typical, ns	50	25	30
Return Loss, typical, dB	20	20	20
Input Power, RMS, maximum, W	200	200	200
Input Power, PEP, maximum, W	2,000	2,000	2,000
3rd Order PIM, typical, dBc	-160	-160	-160
3rd Order PIM Test Method	Two +43 dBm carriers	Two +43 dBm carriers	Two +43 dBm carriers

Block Diagram

Click on image to enlarge.

Environmental Specifications

Operating Temperature	-40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity	Up to 100%
Corrosion Test Method	IEC 60068-2-11, 30 days
Ingress Protection Test Method	IEC 60529:2001, IP67

Packaging and Weights

Included	Mounting hardware
Volume	11.8 L
Weight, net	15.2 kg \| 33.51 lb

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system

Product Classification

Product Type

4-BTS:4-ANT (Quadplex)

General Specifications

Color	Gray
Modularity	2-Twin
Mounting	Pole \| Wall
Mounting Pipe Hardware	Band clamps (2)
RF Connector Interface	4.3-10 Female

Dimensions

Height	316 mm \| 12.441 in
Width	300 mm \| 11.811 in
Depth	125 mm \| 4.921 in
Mounting Pipe Diameter Range	42.6–122 mm

Electrical Specifications

License Band, LNA

DCS 1800 | IMT 2100 | IMT 2600

Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy	Yes
Lightning Surge Current	10 kA
Lightning Surge Current Waveform	8/20 waveform

Electrical Specifications, AISG

AISG Connector	8-pin DIN Female
AISG Connector Standard	IEC 60130-9
Protocol	AISG 2.0
Voltage, AISG Mode	10–30 Vdc

Electrical Specifications

Sub-module	1 \| 2	1 \| 2	1 \| 2
Branch	1	2	3
Port Designation	ANT	ANT	ANT
License Band	DCS 1800, LNA	IMT 2100, LNA	IMT 2600, LNA

Electrical Specifications, Band Pass

Frequency Range, MHz	698–960	1350–1525
Insertion Loss, typical, dB	0.20	0.20
Total Group Delay, typical, ns	5	15
Return Loss, typical, dB	19	20
Input Power, RMS, maximum, W	200	200
Input Power, PEP, maximum, W	1,000	1,000
3rd Order PIM, typical, dBc	-160	-160
3rd Order PIM Test Method	Two +43 dBm carriers	Two +43 dBm carriers

Electrical Specifications, Rx Uplink

Frequency Range, MHz	1710–1785	1920–1980	2500–2570
Bandwidth, MHz	75.00	60.00	70.00
Gain, nominal, dB	12.0	12.0	12.0
Noise Figure, typical, dB	1.4	1.5	1.5
Total Group Delay, typical, ns	120	60	60
Return Loss, typical, dB	20	20	20
Insertion Loss - Bypass Mode, typical, dB	2.2	2.0	2.3
Return Loss - Bypass Mode, typical, dB	16	16	16

Electrical Specifications, Tx Downlink

Frequency Range, MHz	1805–1880	2110–2170	2620–2690
Bandwidth, MHz	75.00	60.00	70.00
Insertion Loss, typical, dB	0.50	0.35	0.45
Total Group Delay, typical, ns	50	25	30
Return Loss, typical, dB	20	20	20
Input Power, RMS, maximum, W	200	200	200
Input Power, PEP, maximum, W	2,000	2,000	2,000
3rd Order PIM, typical, dBc	-160	-160	-160
3rd Order PIM Test Method	Two +43 dBm carriers	Two +43 dBm carriers	Two +43 dBm carriers

Environmental Specifications

Operating Temperature	-40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity	Up to 100%
Corrosion Test Method	IEC 60068-2-11, 30 days
Ingress Protection Test Method	IEC 60529:2001, IP67