For other alternatives, please contact us for more information.

0 Alternative products available

RR-65A-R2VB

4-port sector antenna, 4x 694–960 MHz, 65° HPBW, 2x RET

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Features and Benefits

All Internal RET actuators are connected in “Cascaded SRET” configuration
Uses the 4.3-10 connector which is 40 percent smaller than the 7-16 DIN connector
Tilt indicator is available

Specifications

General Specifications

Antenna Type	Sector
Band	Single band
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, low band	4
RF Connector Quantity, total	4

Remote Electrical Tilt (RET) Information

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	1 female \| 1 male
Input Voltage	10–30 Vdc
Internal RET	Low band (2)
Power Consumption, active state, maximum	10 W
Power Consumption, idle state, maximum	2 W
Protocol	3GPP/AISG 2.0 (Single RET)

Dimensions

Width	467 mm \| 18.386 in
Depth	167 mm \| 6.575 in
Length	1497 mm \| 58.937 in
Net Weight, antenna only	19 kg \| 41.888 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	694 – 960 MHz
Polarization	±45°
Total Input Power, maximum	800 W

Electrical Specifications

Frequency Band, MHz	698–806	790–896	890–960
Beamwidth, Horizontal, degrees	65	66	67
Beamwidth, Vertical, degrees	15	13.5	12.4
Beam Tilt, degrees	2–16	2–16	2–16
USLS (First Lobe), dB	15	17	18
Front-to-Back Ratio at 180°, dB	32	32	32
Front-to-Back Total Power at 180° ± 30°, dB	22	23	22
Isolation, Cross Polarization, dB	25	25	25
Isolation, Inter-band, dB	28	28	28
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-153	-153	-153
Input Power per Port, maximum, watts	300	300	300

Electrical Specifications, BASTA

Frequency Band, MHz	698–806	790–896	890–960
Gain by all Beam Tilts, average, dBi	13.9	14.7	14.6
Gain by all Beam Tilts Tolerance, dB	±0.7	±0.3	±0.3
Beamwidth, Horizontal Tolerance, degrees	±5.1	±6.3	±5.3
Beamwidth, Vertical Tolerance, degrees	±1.2	±0.9	±0.8
USLS, beampeak to 20° above beampeak, dB	17	18	18
CPR at Boresight, dB	28	28	25
CPR at Sector, dB	13	9	8

Mechanical Specifications

Wind Loading @ Velocity, frontal	595.0 N @ 150 km/h (133.8 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	222.0 N @ 150 km/h (49.9 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	735.0 N @ 150 km/h (165.2 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Packaging and Weights

Width, packed	562 mm \| 22.126 in
Depth, packed	287 mm \| 11.299 in
Length, packed	1697 mm \| 66.811 in
Weight, gross	28.7 kg \| 63.273 lb

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant
CHINA-ROHS	Below maximum concentration value
UK-ROHS	Compliant

General Specifications

Antenna Type	Sector
Band	Single band
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, low band	4
RF Connector Quantity, total	4

Remote Electrical Tilt (RET) Information

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	1 female \| 1 male
Input Voltage	10–30 Vdc
Internal RET	Low band (2)
Power Consumption, active state, maximum	10 W
Power Consumption, idle state, maximum	2 W
Protocol	3GPP/AISG 2.0 (Single RET)

Dimensions

Width	467 mm \| 18.386 in
Depth	167 mm \| 6.575 in
Length	1497 mm \| 58.937 in
Net Weight, antenna only	19 kg \| 41.888 lb

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	694 – 960 MHz
Polarization	±45°
Total Input Power, maximum	800 W

Electrical Specifications

Frequency Band, MHz	698–806	790–896	890–960
Beamwidth, Horizontal, degrees	65	66	67
Beamwidth, Vertical, degrees	15	13.5	12.4
Beam Tilt, degrees	2–16	2–16	2–16
USLS (First Lobe), dB	15	17	18
Front-to-Back Ratio at 180°, dB	32	32	32
Front-to-Back Total Power at 180° ± 30°, dB	22	23	22
Isolation, Cross Polarization, dB	25	25	25
Isolation, Inter-band, dB	28	28	28
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-153	-153	-153
Input Power per Port, maximum, watts	300	300	300

Electrical Specifications, BASTA

Frequency Band, MHz	698–806	790–896	890–960
Gain by all Beam Tilts, average, dBi	13.9	14.7	14.6
Gain by all Beam Tilts Tolerance, dB	±0.7	±0.3	±0.3
Beamwidth, Horizontal Tolerance, degrees	±5.1	±6.3	±5.3
Beamwidth, Vertical Tolerance, degrees	±1.2	±0.9	±0.8
USLS, beampeak to 20° above beampeak, dB	17	18	18
CPR at Boresight, dB	28	28	25
CPR at Sector, dB	13	9	8

Mechanical Specifications

Wind Loading @ Velocity, frontal	595.0 N @ 150 km/h (133.8 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	222.0 N @ 150 km/h (49.9 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	735.0 N @ 150 km/h (165.2 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Packaging and Weights

Width, packed	562 mm \| 22.126 in
Depth, packed	287 mm \| 11.299 in
Length, packed	1697 mm \| 66.811 in
Weight, gross	28.7 kg \| 63.273 lb

Click on image to enlarge.

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant
CHINA-ROHS	Below maximum concentration value
UK-ROHS	Compliant