Warning Icon
This product was discontinued on: March 31, 2022

For other alternatives, please contact us for more information.

1 Replacement products available
  • RRV4-65A-R6
    12-port sector antenna, 4x 694–960 and 8x 1695–2690 MHz, 65° HPBW, 6x RET

R2V4PX306R

12-port sector antenna, 4x 698–960 and 8x 1710–2690 MHz, 65° HPBW, 6x RET with manual override. Bands cascaded SRET (Antenna 1 and Antenna 2).

Specifications
Finish making your selections or clear them to view relevant specifications.

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material ASA, UV stabilized
Radiator Material Brass | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, low band 4
RF Connector Quantity, total 12

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET High band (4) | Low band (2)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 641 mm | 25.236 in
Depth 244 mm | 9.606 in
Length 1607 mm | 63.268 in
Net Weight, without mounting kit 49 kg | 108.026 lb

Array Layout

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 960 MHz | 1710 – 2690 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 698–790 790–890 890–960 1710–1920 1920–2170 2300–2690
Gain, dBi 14.2 14.8 15.1 15.1 16.4 16.9
Beamwidth, Horizontal, degrees 65 63 60 62 57 58
Beamwidth, Vertical, degrees 16.3 14.5 13.3 13.7 12.1 9.9
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10 0–10
USLS (First Lobe), dB 18 18 18 18 18 18
Front-to-Back Ratio at 180°, dB 32 31 29 29 32 32
CPR at Boresight, dB 23 16 15 22 21 14
CPR at Sector, dB 15 13 11 11 10 3
Isolation, Cross Polarization, dB 25 25 25 25 25 25
Isolation, Inter-band, dB 30 30 30 30 30 30
VSWR | Return loss, dB 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150
Input Power per Port, maximum, watts 300 300 300 250 250 250

Mechanical Specifications

Wind Loading @ Velocity, frontal 1,296.0 N @ 150 km/h (291.4 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 274.0 N @ 150 km/h (61.6 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 1,367.0 N @ 150 km/h (307.3 lbf @ 150 km/h)
Wind Speed, maximum 250 km/h (155 mph)

Packaging and Weights

Width, packed 739 mm | 29.095 in
Depth, packed 347 mm | 13.661 in
Length, packed 1810 mm | 71.26 in
Weight, gross 73 kg | 160.937 lb

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant/Exempted

General Specifications

Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material ASA, UV stabilized
Radiator Material Brass | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, low band 4
RF Connector Quantity, total 12

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal RET High band (4) | Low band (2)
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 641 mm | 25.236 in
Depth 244 mm | 9.606 in
Length 1607 mm | 63.268 in
Net Weight, without mounting kit 49 kg | 108.026 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 960 MHz | 1710 – 2690 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 698–790 790–890 890–960 1710–1920 1920–2170 2300–2690
Gain, dBi 14.2 14.8 15.1 15.1 16.4 16.9
Beamwidth, Horizontal, degrees 65 63 60 62 57 58
Beamwidth, Vertical, degrees 16.3 14.5 13.3 13.7 12.1 9.9
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10 0–10
USLS (First Lobe), dB 18 18 18 18 18 18
Front-to-Back Ratio at 180°, dB 32 31 29 29 32 32
CPR at Boresight, dB 23 16 15 22 21 14
CPR at Sector, dB 15 13 11 11 10 3
Isolation, Cross Polarization, dB 25 25 25 25 25 25
Isolation, Inter-band, dB 30 30 30 30 30 30
VSWR | Return loss, dB 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150
Input Power per Port, maximum, watts 300 300 300 250 250 250

Mechanical Specifications

Wind Loading @ Velocity, frontal 1,296.0 N @ 150 km/h (291.4 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 274.0 N @ 150 km/h (61.6 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 1,367.0 N @ 150 km/h (307.3 lbf @ 150 km/h)
Wind Speed, maximum 250 km/h (155 mph)

Packaging and Weights

Width, packed 739 mm | 29.095 in
Depth, packed 347 mm | 13.661 in
Length, packed 1810 mm | 71.26 in
Weight, gross 73 kg | 160.937 lb
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
CE Compliant with the relevant CE product directives
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
CHINA-ROHS Above maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant/Exempted

Assembly Drawing

Installation Instruction

Product Specification

Assembly Drawing

Installation Instruction

Product Specification