For other alternatives, please contact us for more information.

0 Alternative products available

E14R00P35

Dual Band Tower Mounted Amplifier, 1800/2100 MHz with 1400 MHz bypass, 12 dB, 2 BTS & 2 ANT ports, AISG with 1 RET connector (1 devices with 2 sub-units each), with 4.3-10 connectors

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Download

Features and Benefits

Industry leading PIM performance
New 4.3-10 connectors for improved PIM performance and size reduction
Designed for network modernization application, introduction of LTE1400 on existing site
TMA with 1452-1492 MHz bypass
2 input ports and 2 output ports
Automatic LNA by-pass function
Built in lightning protection
Connectors “in line”
Single AISG with 1 RET connector
1 device with 2 sub-units

Specifications

Product Classification

Product Type

1-BTS:1-ANT (Uniplex) | Tower mounted amplifier

General Specifications

Color	Gray
Modularity	2-Twin
Mounting	Pole \| Wall
Mounting Pipe Hardware	Band clamps (2)
RF Connector Interface	4.3-10 Female

Dimensions

Height	280 mm \| 11.024 in
Width	175 mm \| 6.89 in
Depth	98 mm \| 3.858 in
Mounting Pipe Diameter Range	50–120 mm

Outline Drawing

Click on image to enlarge.

Electrical Specifications

License Band, Band Pass	SDL 1400
License Band, LNA	DCS 1800 \| IMT 2100 \| IMT 2600

Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy	Yes
Lightning Surge Current	10 kA
Lightning Surge Current Waveform	8/20 waveform
Voltage	7–30 Vdc
Alarm Current, CWA Mode	190 mA ±15 mA

Electrical Specifications, AISG

AISG Connector	8-pin DIN Female
AISG Connector Standard	IEC 60130-9
Protocol	AISG 2.0
Voltage, AISG Mode	10–30 Vdc

Electrical Specifications

Sub-module	1 \| 2	1 \| 2	1 \| 2
Branch	1	1	1
Port Designation	ANT	ANT	ANT
License Band	SDL 1400, Band Pass	DCS 1800, LNA	IMT 2100, LNA

Electrical Specifications, Band Pass

Frequency Range, MHz	1452–1492
Insertion Loss, typical, dB	0.35
Return Loss, minimum, dB	18
Input Power, RMS, maximum, W	200
Input Power, PEP, maximum, W	100
3rd Order PIM, typical, dBc	-162
3rd Order PIM Test Method	Two +43 dBm carriers

Electrical Specifications, Rx Uplink

Frequency Range, MHz	1710–1785	1920–1980
Bandwidth, MHz	75.00	60.00
Gain, nominal, dB	12.0	12.0
Noise Figure, typical, dB	1.7	1.6
Output IP3, minimum, dBm	12	12
Return Loss, minimum, dB	18	18
Insertion Loss - Bypass Mode, typical, dB	2.5	2.3
Return Loss - Bypass Mode, typical, dB	16	16

Electrical Specifications, Tx Downlink

Frequency Range, MHz	1805–1880	2110–2170
Bandwidth, MHz	60.00	60.00
Insertion Loss, typical, dB	0.30	0.30
Return Loss, minimum, dB	18	18
Input Power, RMS, maximum, W	200	200
Input Power, PEP, maximum, W	1,000	1,000
3rd Order PIM, typical, dBc	-162	-162
3rd Order PIM Test Method	Two +43 dBm carriers	Two +43 dBm carriers

Block Diagram

Click on image to enlarge.

Mechanical Specifications

Wind Speed, maximum

200 km/h (124 mph)

Environmental Specifications

Operating Temperature	-40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity	Up to 100%
Corrosion Test Method	IEC 60068-2-11, 30 days
Ingress Protection Test Method	IEC 60529:2001, IP67

Packaging and Weights

Included	Mounting hardware
Volume	4.8 L
Weight, net	8 kg \| 17.637 lb

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system

Product Classification

Product Type

1-BTS:1-ANT (Uniplex) | Tower mounted amplifier

General Specifications

Color	Gray
Modularity	2-Twin
Mounting	Pole \| Wall
Mounting Pipe Hardware	Band clamps (2)
RF Connector Interface	4.3-10 Female

Dimensions

Height	280 mm \| 11.024 in
Width	175 mm \| 6.89 in
Depth	98 mm \| 3.858 in
Mounting Pipe Diameter Range	50–120 mm

Electrical Specifications

License Band, Band Pass	SDL 1400
License Band, LNA	DCS 1800 \| IMT 2100 \| IMT 2600

Electrical Specifications, dc Power/Alarm

dc Switching/Redundancy	Yes
Lightning Surge Current	10 kA
Lightning Surge Current Waveform	8/20 waveform
Voltage	7–30 Vdc
Alarm Current, CWA Mode	190 mA ±15 mA

Electrical Specifications, AISG

AISG Connector	8-pin DIN Female
AISG Connector Standard	IEC 60130-9
Protocol	AISG 2.0
Voltage, AISG Mode	10–30 Vdc

Electrical Specifications

Sub-module	1 \| 2	1 \| 2	1 \| 2
Branch	1	1	1
Port Designation	ANT	ANT	ANT
License Band	SDL 1400, Band Pass	DCS 1800, LNA	IMT 2100, LNA

Electrical Specifications, Band Pass

Frequency Range, MHz	1452–1492
Insertion Loss, typical, dB	0.35
Return Loss, minimum, dB	18
Input Power, RMS, maximum, W	200
Input Power, PEP, maximum, W	100
3rd Order PIM, typical, dBc	-162
3rd Order PIM Test Method	Two +43 dBm carriers

Electrical Specifications, Rx Uplink

Frequency Range, MHz	1710–1785	1920–1980
Bandwidth, MHz	75.00	60.00
Gain, nominal, dB	12.0	12.0
Noise Figure, typical, dB	1.7	1.6
Output IP3, minimum, dBm	12	12
Return Loss, minimum, dB	18	18
Insertion Loss - Bypass Mode, typical, dB	2.5	2.3
Return Loss - Bypass Mode, typical, dB	16	16

Electrical Specifications, Tx Downlink

Frequency Range, MHz	1805–1880	2110–2170
Bandwidth, MHz	60.00	60.00
Insertion Loss, typical, dB	0.30	0.30
Return Loss, minimum, dB	18	18
Input Power, RMS, maximum, W	200	200
Input Power, PEP, maximum, W	1,000	1,000
3rd Order PIM, typical, dBc	-162	-162
3rd Order PIM Test Method	Two +43 dBm carriers	Two +43 dBm carriers

Mechanical Specifications

Wind Speed, maximum

200 km/h (124 mph)

Environmental Specifications

Operating Temperature	-40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity	Up to 100%
Corrosion Test Method	IEC 60068-2-11, 30 days
Ingress Protection Test Method	IEC 60529:2001, IP67