1. Home
  2. Network Type
  3. Outdoor Macro Cell Sites
  4. Structural Support Equipment

Cable Support & Radio Mounts

Equipment Platforms & Canopies

Microwave Mounts

Pipes & Site Hardware

Poles

Reinforcement Kits

Rooftop & Building Mounts

Tower & Monopole Mounts

CommScope provides structural support solutions that deliver stability, durability and precision for the most important networks in the world. Our premium structural support solutions reinforce your structure and optimize antenna performance. As a result, these solutions help you realize significant, long-term OpEx savings.

Our support systems are suited to be used on virtually any kind of tower, monopole, roof top structure or water tower. Each solution is engineered to meet or exceed the latest EIA/TIA code requirements and conform to both ISO-9001 standards and AISC specifications. This proven excellence enables network operators to:

Antenna alignment iconAntenna alignment

Minimize antenna misalignment

Optimization iconOptimization

Utilize available spectrum more efficiently and Improve RF path integrity and overall network performance

Quality iconQuality

Increase throughput and quality of service

Reduce Costs iconReduce Costs

Mitigate customer churn and total cost of ownership

For additional Structural Support Product information, please contact steelproducts@commscope.com.

Products

of 1678 results found
View:
Compare

Categories

Filters

WT-HRM2-B WT-HRM2-B
Water Tower Top Rail Mount for 2-3/8 in OD mounting pipe, plain end pipe not included
WT-HRM2-B
  • Product Type: Water tower mount
  • Pipe Outer Diameter: 60.96 mm | 2.4 in
SpecificationsSpecs
WT-HRM2-B
  • Product Type: Water tower mount
  • Pipe Outer Diameter: 60.96 mm | 2.4 in
WT-MMP WT-MMP
Mini Monopole for Stackable Pod Mount Assembly, 16 ft
WT-MMP
  • Product Type: Water tower mount
  • Pipe Outer Diameter: 355.6 mm | 14 in
  • Pipe Length: 4876.8 mm | 192 in
SpecificationsSpecs
WT-MMP
  • Product Type: Water tower mount
  • Pipe Outer Diameter: 355.6 mm | 14 in
  • Pipe Length: 4876.8 mm | 192 in
WT-MMP-10 WT-MMP-10
Mini Monopole for Stackable Pod Mount Assembly, 10 ft
WT-MMP-10
  • Product Type: Water tower mount
  • Pipe Outer Diameter: 355.6 mm | 14 in
SpecificationsSpecs
WT-MMP-10
  • Product Type: Water tower mount
  • Pipe Outer Diameter: 355.6 mm | 14 in
WT-MMP-7 WT-MMP-7
Mini Monopole for Stackable Pod Mount Assembly, 7 ft
WT-MMP-7
  • Product Type: Water tower mount
  • Pipe Outer Diameter: 355.6 mm | 14 in
SpecificationsSpecs
WT-MMP-7
  • Product Type: Water tower mount
  • Pipe Outer Diameter: 355.6 mm | 14 in
WT-MSM2-B WT-MSM2-B
Mid-span Mount for 2-3/8 in OD mounting pipe, plain end pipe not included
WT-MSM2-B
  • Product Type: Water tower mount
  • Pipe Outer Diameter: 60.96 mm | 2.4 in
SpecificationsSpecs
WT-MSM2-B
  • Product Type: Water tower mount
  • Pipe Outer Diameter: 60.96 mm | 2.4 in
WT-MSM3-B WT-MSM3-B
Mid-span Mount for 2-7/8 in OD mounting pipe, plain end pipe not included
WT-MSM3-B
  • Product Type: Water tower mount
  • Pipe Outer Diameter: 73.66 mm | 2.9 in
SpecificationsSpecs
WT-MSM3-B
  • Product Type: Water tower mount
  • Pipe Outer Diameter: 73.66 mm | 2.9 in
WT-MSM35-B WT-MSM35-B
Mid-span Mount for 3-1/2 in OD mounting pipe, plain end pipe not included
WT-MSM35-B
  • Product Type: Water tower mount
  • Pipe Outer Diameter: 88.9 mm | 3.5 in
SpecificationsSpecs
WT-MSM35-B
  • Product Type: Water tower mount
  • Pipe Outer Diameter: 88.9 mm | 3.5 in
WT-MSM4-B WT-MSM4-B
Mid-span Mount for 4-1/2 in OD mounting pipe, plain end pipe not included
WT-MSM4-B
  • Product Type: Water tower mount
  • Pipe Outer Diameter: 114.3 mm | 4.5 in
SpecificationsSpecs
WT-MSM4-B
  • Product Type: Water tower mount
  • Pipe Outer Diameter: 114.3 mm | 4.5 in
WT-RTA12-12-96 WT-RTA12-12-96
Water Tower Rooftop Assembly, 3-sector, 12 ft face, twelve 2-3/8 in OD x 96 in plain end pipes included
WT-RTA12-12-96
  • Product Type: Water tower mount
  • Face Width: 3.81 m | 12.5 ft
  • Pipe Outer Diameter: 60.96 mm | 2.4 in
  • Pipe Length: 2438.4 mm | 96 in
SpecificationsSpecs
WT-RTA12-12-96
  • Product Type: Water tower mount
  • Face Width: 3.81 m | 12.5 ft
  • Pipe Outer Diameter: 60.96 mm | 2.4 in
  • Pipe Length: 2438.4 mm | 96 in
WT-RTA12-9-96 WT-RTA12-9-96
Water Tower Rooftop Assembly, 3-sector, 12 ft face, nine 2-3/8 in OD x 96 in plain end pipes included
WT-RTA12-9-96
  • Product Type: Water tower mount
  • Face Width: 3.81 m | 12.5 ft
  • Pipe Outer Diameter: 60.96 mm | 2.4 in
  • Pipe Length: 2438.4 mm | 96 in
SpecificationsSpecs
WT-RTA12-9-96
  • Product Type: Water tower mount
  • Face Width: 3.81 m | 12.5 ft
  • Pipe Outer Diameter: 60.96 mm | 2.4 in
  • Pipe Length: 2438.4 mm | 96 in
WT-RTA14-12-96 WT-RTA14-12-96
Water Tower Rooftop Assembly, 3-sector, 14 ft face, twelve 2-3/8 in OD x 96 in plain end pipes included
WT-RTA14-12-96
  • Product Type: Water tower mount
  • Face Width: 4.42 m | 14.5 ft
  • Pipe Outer Diameter: 60.96 mm | 2.4 in
  • Pipe Length: 2438.4 mm | 96 in
SpecificationsSpecs
WT-RTA14-12-96
  • Product Type: Water tower mount
  • Face Width: 4.42 m | 14.5 ft
  • Pipe Outer Diameter: 60.96 mm | 2.4 in
  • Pipe Length: 2438.4 mm | 96 in
WT-RTA14-9-96 WT-RTA14-9-96
Water Tower Rooftop Assembly, 3-sector, 14 ft face, nine 2-3/8 in OD x 96 in plain end pipes included
WT-RTA14-9-96
  • Product Type: Water tower mount
  • Face Width: 4.42 m | 14.5 ft
  • Pipe Outer Diameter: 60.96 mm | 2.4 in
  • Pipe Length: 2438.4 mm | 96 in
SpecificationsSpecs
WT-RTA14-9-96
  • Product Type: Water tower mount
  • Face Width: 4.42 m | 14.5 ft
  • Pipe Outer Diameter: 60.96 mm | 2.4 in
  • Pipe Length: 2438.4 mm | 96 in
Compare
Deploy-FTTA-with-speed-webinar-hero500-v2
Is PIM preventing you from maximum performance?

In this Q&A, Commscope's Jared Haines, answers the most asked questions. 

Structural-Support-Guide-CO-116659-EN-hero500
Product Selection Guide

Structural support solutions for monopoles, towers, rooftops, equipment platforms, radio mounts, cable support, small cell, and pipe/pole mounts.
structural-support
Product Selection Guide

Structural support products for microwave antenna applications.
RGEpUMNEMGifrcf3u6Jn2i
PIM-Guard™ MP-PP Monopole Platform Video

An installation and overview of the monopole platform for base station antennas.

Watch Video

Sort By:

Filters

  • Q&A: Is PIM holding you back from maximum performance?

    CommScope's Jared Haines, answers the most asked questions.
    Download

  • Fact Sheet: Add capacity to monopoles with CommScope four-sector monopole platforms

    Download

  • Selection Guide: Structural Support Products - Microwave

    Product selection guide for microwave antenna applications
    Download

  • Product Selection Guide: Tower Reinforcement & Mod Parts

    Download

  • Brochure: CommScope solutions for U.S. rip and replace program

    Who makes your network equipment matters when it comes to national security in the U.S. CommScope helps make the rip-and-replace transition quick, easy, and cost-effective.
    Download

  • Brochure: 4G/5G Sector Wrap Mount

    4G/5G sector wrap mount for all pole type; works with existing mounting holes. It’s easy to adjust, requires no customization and is available in multiple configurations.
    Download

Filters

April 10, 2018

Blog

Untangle Your Tower’s Bird Nest

Today’s tower tops are crowded. With hundreds of fiber, power and coaxial cables connecting all the radios, antennas and RF devices, it’s easy to end up with a bird’s nest. Learn how CommScope can ...

October 01, 2017

Blog

How to speed up cell site deployments

Network operators have an increased need to install cell site equipment quickly to meet consumer demands for bandwidth. Smaller equipment can help speed deployment, but CommScope is going a step fu...

August 29, 2017

Blog

How to Make Metro Cells Easier to Deploy

Not sure which metro cell solution meets your requirements? Maybe you need more options. Flexibility is the key to success, says Mike Fabbri in this blog post. Use the new metro cell planning tool ...

May 04, 2017

Blog

How the U.S. Wireless Industry Could Save $5 Million

A small piece of metal could save the U.S. wireless industry up to $5 million. The metal is CommScope’s new SnapStak Plus cable hanger. The serious cost-savings come from the total amount of time s...

          Sort By:

          Filters

          • Q&A: Is PIM holding you back from maximum performance?

            CommScope's Jared Haines, answers the most asked questions.
            Download

          • Fact Sheet: Add capacity to monopoles with CommScope four-sector monopole platforms

            Download

          • Selection Guide: Structural Support Products - Microwave

            Product selection guide for microwave antenna applications
            Download

          • Product Selection Guide: Tower Reinforcement & Mod Parts

            Download

          • Brochure: CommScope solutions for U.S. rip and replace program

            Who makes your network equipment matters when it comes to national security in the U.S. CommScope helps make the rip-and-replace transition quick, easy, and cost-effective.
            Download

          • Brochure: 4G/5G Sector Wrap Mount

            4G/5G sector wrap mount for all pole type; works with existing mounting holes. It’s easy to adjust, requires no customization and is available in multiple configurations.
            Download