FFVV-65B-R2
8-port sector antenna, 4x 617-894 and 4x 1695-2200 MHz, 65° HPBW, 2x RET
Features and Benefits
- Antenna includes 2×Single Column X-Pol Arrays for 617-894MHz and 2×Single Column X-Pol Arrays for 1695-2200MHz
Specifications
General Specifications
| Antenna Type | Sector |
| Band | Multiband |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | Fiberglass, UV resistant |
| Reflector Material | Aluminum |
| RF Connector Interface | 4.3-10 Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, mid band | 4 |
| RF Connector Quantity, low band | 4 |
| RF Connector Quantity, total | 8 |
Remote Electrical Tilt (RET) Information
| RET Hardware | CommRET v2 |
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 1 female | 1 male |
| Input Voltage | 10–30 Vdc |
| Internal RET | Low band (1) | Mid band (1) |
| Power Consumption, active state, maximum | 10 W |
| Power Consumption, idle state, maximum | 2 W |
Dimensions
| Width | 498 mm | 19.606 in |
| Depth | 197 mm | 7.756 in |
| Length | 1828 mm | 71.969 in |
| Net Weight, antenna only | 32 kg | 70.548 lb |
Array Layout
| Click on image to enlarge. |
Port Configuration
| Click on image to enlarge. |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 617 – 894 MHz | 1695 – 2200 MHz |
| Polarization | ±45° |
| Total Input Power, maximum | 900 W @ 50 °C |
Electrical Specifications
| R1,R2 | R1,R2 | B1,B2 | B1,B2 | |
| Frequency Band, MHz | 617–728 | 814–894 | 1695–1780 | 1995–2200 |
| RF Port | 1,2,3,4 | 1,2,3,4 | 5,6,7,8 | 5,6,7,8 |
| Gain, dBi | 14.6 | 15.3 | 18.1 | 18.8 |
| Beamwidth, Horizontal, degrees | 64 | 63 | 68 | 67 |
| Beamwidth, Vertical, degrees | 14.3 | 12.3 | 5.7 | 4.8 |
| Beam Tilt, degrees | 2–14 | 2–14 | 2–12 | 2–12 |
| USLS (First Lobe), dB | 15 | 16 | 17 | 18 |
| Front-to-Back Ratio at 180°, dB | 28 | 27 | 30 | 30 |
| Isolation, Cross Polarization, dB | 25 | 25 | 25 | 25 |
| Isolation, Inter-band, dB | 25 | 25 | 25 | 25 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -150 | -150 | -150 | -150 |
| Input Power per Port at 50°C, maximum, watts | 250 | 250 | 200 | 200 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 617–728 | 814–894 | 1695–1780 | 1995–2200 |
| Gain by all Beam Tilts, average, dBi | 13.7 | 14.4 | 17.5 | 18.2 |
| Gain by all Beam Tilts Tolerance, dB | ±0.7 | ±0.7 | ±0.4 | ±0.4 |
| Beamwidth, Horizontal Tolerance, degrees | ±8 | ±6 | ±3 | ±5 |
| Beamwidth, Vertical Tolerance, degrees | ±1 | ±0.7 | ±0.3 | ±0.3 |
| USLS, beampeak to 20° above beampeak, dB | 16 | 16 | 16 | |
| Front-to-Back Total Power at 180° ± 30°, dB | 21 | 20 | 28 | 30 |
| CPR at Boresight, dB | 17 | 17 | 20 | 17 |
| CPR at Sector, dB | 9 | 8 | 9 | 8 |
Mechanical Specifications
| Effective Projective Area (EPA), frontal | 0.58 m² | 6.243 ft² |
| Effective Projective Area (EPA), lateral | 0.18 m² | 1.938 ft² |
| Wind Loading @ Velocity, frontal | 622.0 N @ 150 km/h (139.8 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 188.0 N @ 150 km/h (42.3 lbf @ 150 km/h) |
| Wind Loading @ Velocity, maximum | 746.0 N @ 150 km/h (167.7 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 428.0 N @ 150 km/h (96.2 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 565 mm | 22.244 in |
| Depth, packed | 309 mm | 12.165 in |
| Length, packed | 2015 mm | 79.331 in |
| Weight, gross | 45.5 kg | 100.310 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
General Specifications
| Antenna Type | Sector |
| Band | Multiband |
| Color | Light Gray (RAL 7035) |
| Grounding Type | RF connector inner conductor and body grounded to reflector and mounting bracket |
| Performance Note | Outdoor usage |
| Radome Material | Fiberglass, UV resistant |
| Reflector Material | Aluminum |
| RF Connector Interface | 4.3-10 Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, mid band | 4 |
| RF Connector Quantity, low band | 4 |
| RF Connector Quantity, total | 8 |
Remote Electrical Tilt (RET) Information
| RET Hardware | CommRET v2 |
| RET Interface | 8-pin DIN Female | 8-pin DIN Male |
| RET Interface, quantity | 1 female | 1 male |
| Input Voltage | 10–30 Vdc |
| Internal RET | Low band (1) | Mid band (1) |
| Power Consumption, active state, maximum | 10 W |
| Power Consumption, idle state, maximum | 2 W |
Dimensions
| Width | 498 mm | 19.606 in |
| Depth | 197 mm | 7.756 in |
| Length | 1828 mm | 71.969 in |
| Net Weight, antenna only | 32 kg | 70.548 lb |
Electrical Specifications
| Impedance | 50 ohm |
| Operating Frequency Band | 617 – 894 MHz | 1695 – 2200 MHz |
| Polarization | ±45° |
| Total Input Power, maximum | 900 W @ 50 °C |
Electrical Specifications
| R1,R2 | R1,R2 | B1,B2 | B1,B2 | |
| Frequency Band, MHz | 617–728 | 814–894 | 1695–1780 | 1995–2200 |
| RF Port | 1,2,3,4 | 1,2,3,4 | 5,6,7,8 | 5,6,7,8 |
| Gain, dBi | 14.6 | 15.3 | 18.1 | 18.8 |
| Beamwidth, Horizontal, degrees | 64 | 63 | 68 | 67 |
| Beamwidth, Vertical, degrees | 14.3 | 12.3 | 5.7 | 4.8 |
| Beam Tilt, degrees | 2–14 | 2–14 | 2–12 | 2–12 |
| USLS (First Lobe), dB | 15 | 16 | 17 | 18 |
| Front-to-Back Ratio at 180°, dB | 28 | 27 | 30 | 30 |
| Isolation, Cross Polarization, dB | 25 | 25 | 25 | 25 |
| Isolation, Inter-band, dB | 25 | 25 | 25 | 25 |
| VSWR | Return loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -150 | -150 | -150 | -150 |
| Input Power per Port at 50°C, maximum, watts | 250 | 250 | 200 | 200 |
Electrical Specifications, BASTA
| Frequency Band, MHz | 617–728 | 814–894 | 1695–1780 | 1995–2200 |
| Gain by all Beam Tilts, average, dBi | 13.7 | 14.4 | 17.5 | 18.2 |
| Gain by all Beam Tilts Tolerance, dB | ±0.7 | ±0.7 | ±0.4 | ±0.4 |
| Beamwidth, Horizontal Tolerance, degrees | ±8 | ±6 | ±3 | ±5 |
| Beamwidth, Vertical Tolerance, degrees | ±1 | ±0.7 | ±0.3 | ±0.3 |
| USLS, beampeak to 20° above beampeak, dB | 16 | 16 | 16 | |
| Front-to-Back Total Power at 180° ± 30°, dB | 21 | 20 | 28 | 30 |
| CPR at Boresight, dB | 17 | 17 | 20 | 17 |
| CPR at Sector, dB | 9 | 8 | 9 | 8 |
Mechanical Specifications
| Effective Projective Area (EPA), frontal | 0.58 m² | 6.243 ft² |
| Effective Projective Area (EPA), lateral | 0.18 m² | 1.938 ft² |
| Wind Loading @ Velocity, frontal | 622.0 N @ 150 km/h (139.8 lbf @ 150 km/h) |
| Wind Loading @ Velocity, lateral | 188.0 N @ 150 km/h (42.3 lbf @ 150 km/h) |
| Wind Loading @ Velocity, maximum | 746.0 N @ 150 km/h (167.7 lbf @ 150 km/h) |
| Wind Loading @ Velocity, rear | 428.0 N @ 150 km/h (96.2 lbf @ 150 km/h) |
| Wind Speed, maximum | 241 km/h (150 mph) |
Packaging and Weights
| Width, packed | 565 mm | 22.244 in |
| Depth, packed | 309 mm | 12.165 in |
| Length, packed | 2015 mm | 79.331 in |
| Weight, gross | 45.5 kg | 100.310 lb |
| Click on image to enlarge. |
| Click on image to enlarge. |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
Documentation & Downloads
Assembly Drawing
Product Information
Product Specification
Warranty
Assembly Drawing
Product Compliance Documentation
Product Information
Product Specification
Warranty
Related Products and Accessories
Included Products
Structural Support, Tools & Accessories
-
![]()
BSAMNT-2F Mounting bracket for cylindrical pipe installations (60-115mm pipe diameter) for fix mechanical tilt applications.
Included Products
Structural Support, Tools & Accessories
-
![]()
BSAMNT-2F Mounting bracket for cylindrical pipe installations (60-115mm pipe diameter) for fix mechanical tilt applications.
Other Ways to Browse
