Warning Icon
This product was discontinued on: March 31, 2022

For other alternatives, please contact us for more information.

1 Replacement products available
  • RV4-65B-R5-V2
    10-port sector antenna, 2x 694–960 and 8x 1695–2690 MHz, 65° HPBW, 5x RET

DHHTT65B-3XR

10-port sector antenna, 2x 790–960, 4x 1710–2180 and 4x 2490-2690 MHz, 65° HPBW, 3x RET with individual tilt available for the 850 MHz band, 1900 MHz bands and 2500 MHz bands.

Specifications
Finish making your selections or clear them to view relevant specifications.

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material ASA, UV stabilized
Radiator Material Copper | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.1-9.5 DIN Female | 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, mid band 0
RF Connector Quantity, low band 2
RF Connector Quantity, total 10

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Multi-RET)

Dimensions

Width 301 mm | 11.85 in
Depth 181 mm | 7.126 in
Length 1832 mm | 72.126 in
Net Weight, without mounting kit 20.6 kg | 45.415 lb

Array Layout

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 790 – 960 MHz | 1710 – 2180 MHz | 2490 – 2690 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 790–896 870–960 1710–1880 1850–1990 1920–2180 2490–2690
Connector Interface 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 4.1-9.5 DIN Female
Connector Location Bottom Bottom Bottom Bottom Bottom Bottom
Gain, dBi 15.5 15.5 17.3 17.4 17.5 17.2
Beamwidth, Horizontal, degrees 64 63 71 69 66 60
Beamwidth, Vertical, degrees 11.2 10.3 5.6 5.4 5.1 4.3
Beam Tilt, degrees 0–10 0–10 0–8 0–8 0–8 0–8
USLS (First Lobe), dB 15 16 15 16 15 18
Front-to-Back Ratio at 180°, dB 28 31 31 29 25 26
CPR at Boresight, dB 20 19 20 20 18 16
CPR at Sector, dB 9 9 9 9 7 4
Isolation, Cross Polarization, dB 25 25 25 25 25 25
Isolation, Inter-band, dB 30 30 30 30 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -150
Input Power per Port, maximum, watts 350 350 300 300 300 250

Mechanical Specifications

Wind Loading @ Velocity, frontal 279.0 N @ 150 km/h (62.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 231.0 N @ 150 km/h (51.9 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 538.0 N @ 150 km/h (120.9 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 283.0 N @ 150 km/h (63.6 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 409 mm | 16.102 in
Depth, packed 299 mm | 11.772 in
Length, packed 1954 mm | 76.929 in
Weight, gross 33.2 kg | 73.193 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance

General Specifications

Antenna Type Sector
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material ASA, UV stabilized
Radiator Material Copper | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.1-9.5 DIN Female | 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 8
RF Connector Quantity, mid band 0
RF Connector Quantity, low band 2
RF Connector Quantity, total 10

Remote Electrical Tilt (RET) Information

RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Power Consumption, idle state, maximum 2 W
Power Consumption, normal conditions, maximum 13 W
Protocol 3GPP/AISG 2.0 (Multi-RET)

Dimensions

Width 301 mm | 11.85 in
Depth 181 mm | 7.126 in
Length 1832 mm | 72.126 in
Net Weight, without mounting kit 20.6 kg | 45.415 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 790 – 960 MHz | 1710 – 2180 MHz | 2490 – 2690 MHz
Polarization ±45°

Electrical Specifications

Frequency Band, MHz 790–896 870–960 1710–1880 1850–1990 1920–2180 2490–2690
Connector Interface 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 7-16 DIN Female 4.1-9.5 DIN Female
Connector Location Bottom Bottom Bottom Bottom Bottom Bottom
Gain, dBi 15.5 15.5 17.3 17.4 17.5 17.2
Beamwidth, Horizontal, degrees 64 63 71 69 66 60
Beamwidth, Vertical, degrees 11.2 10.3 5.6 5.4 5.1 4.3
Beam Tilt, degrees 0–10 0–10 0–8 0–8 0–8 0–8
USLS (First Lobe), dB 15 16 15 16 15 18
Front-to-Back Ratio at 180°, dB 28 31 31 29 25 26
CPR at Boresight, dB 20 19 20 20 18 16
CPR at Sector, dB 9 9 9 9 7 4
Isolation, Cross Polarization, dB 25 25 25 25 25 25
Isolation, Inter-band, dB 30 30 30 30 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -150
Input Power per Port, maximum, watts 350 350 300 300 300 250

Mechanical Specifications

Wind Loading @ Velocity, frontal 279.0 N @ 150 km/h (62.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 231.0 N @ 150 km/h (51.9 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 538.0 N @ 150 km/h (120.9 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 283.0 N @ 150 km/h (63.6 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 409 mm | 16.102 in
Depth, packed 299 mm | 11.772 in
Length, packed 1954 mm | 76.929 in
Weight, gross 33.2 kg | 73.193 lb
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification