Warning Icon

For other alternatives, please contact us for more information.

0 Replacement products available

RRZZT4-65A-R5-V2

16-port sector antenna, 4x 694–960, 4x 1427-2690 MHz 65° HPBW and 8x 2300–2690 MHz, 90° HPBW, 5x RET
Specifications
Finish making your selections or clear them to view relevant specifications.
How to Buy
Features and Benefits
  • Includes 2x Single Column X-Pol Arrays for 694-960MHz and 2x Single Column X-Pol Arrays for 1427-2690MHz, suitable for 4x MIMO applications
  • Also includes 1x 4-Column Array for 2300-2690 MHz with calibration port. Column spacing optimized to support Soft Split Beamforming
  • A calibration port is provided for the 4-Column Array
  • 5 Internal RET’s provide independent electrical tilt control for each array
  • Supports re-configurable antenna sharing capability. Factory setting puts 2.6 GHz RET control (Y3) on AISG2, all other arrays have RET control on AISG1.
Specifications

General Specifications

Antenna Type Sector
Polarization ±45°
Band Multiband
Calibration Connector Interface 4.3-10 Female
Calibration Connector Quantity 1
Color Light gray
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN | Outdoor usage
Radome Material Fiberglass, UV resistant
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 12
RF Connector Quantity, low band 4
RF Connector Quantity, total 16

Remote Electrical Tilt (RET) Information, General

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 male | 2 female

Dimensions

Width 498 mm | 19.606 in
Length 1499 mm | 59.016 in
Depth 197 mm | 7.756 in
Column Spacing 58 mm | 2.283 in

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1427 – 2690 MHz | 2300 – 2690 MHz
Total Input Power, maximum 900 W @ 50 °C

Remote Electrical Tilt (RET) Information, Electrical

Protocol 3GPP/AISG 2.0 (Single RET)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Input Voltage 10–30 Vdc
Internal RET Low band (2) | High band (3)

Electrical Specifications

R1-R2 R1-R2 R1-R2 Y1-Y2 Y1-Y2 Y1-Y2 Y3 Y3
Frequency Band, MHz 890–960 790–890 694–790 2300–2690 1695–2180 1427–1518 2300–2500 2490–2690
Gain, dBi 13.5 13.4 13.2 18.3 17.1 15.4 16.5 16.5
Beamwidth, Horizontal, degrees 63 66 70 55 73 68 95 94
Beamwidth, Vertical, degrees 13.9 15.3 17 5.2 6.9 8.9 5.3 5
Beam Tilt, degrees 2–16 2–16 2–16 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 16 22 20 19 17 21 17 19
Front-to-Back Ratio at 180°, dB 26 29 31 31 30 33 34 31
Coupling level, Amp, Antenna port to Cal port, dB 26 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2 ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7 7
Isolation, Cross Polarization, dB 27 27 27 25 25 25 25 25
Isolation, Inter-band, dB 27 27 27 25 25 25 20 20
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 300 300 300 200 250 250 200 200

Electrical Specifications, BASTA

Frequency Band, MHz 890–960 790–890 694–790 2300–2690 1695–2180 1427–1518 2300–2500 2490–2690
Gain by all Beam Tilts, average, dBi 13.2 13.1 12.9 18.0 16.3 15.0 16.0 15.9
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.5 ±0.4 ±0.5 ±0.8 ±0.5 ±0.6 ±0.9
Gain by Beam Tilt, average, dBi 2 ° | 13.4
9 ° | 13.3
16 ° | 13.1
2 ° | 13.3
9 ° | 13.2
16 ° | 12.7
2 ° | 13.0
9 ° | 12.9
16 ° | 12.7
2 ° | 17.5
7 ° | 18.1
12 ° | 17.8
2 ° | 16.0
7 ° | 16.4
12 ° | 16.2
2 ° | 15.0
7 ° | 15.1
12 ° | 15.0
2 ° | 16.0
7 ° | 16.1
12 ° | 15.9
2 ° | 15.8
7 ° | 16.1
12 ° | 15.8
Beamwidth, Horizontal Tolerance, degrees ±5.5 ±5.7 ±8.9 ±4.8 ±9.3 ±5.7 ±13.1 ±10.9
Beamwidth, Vertical Tolerance, degrees ±1.2 ±1.2 ±1.1 ±0.5 ±0.9 ±0.4 ±0.3 ±0.3
USLS, beampeak to 20° above beampeak, dB 16 16 16 17 17
Front-to-Back Total Power at 180° ± 30°, dB 21 21 20 26 25 25 25 24
CPR at Boresight, dB 19 19 20 17 18 20 15 14
CPR at Sector, dB 11 8 12 2 4 4 11 9

Electrical Specifications, Broadcast 65

Frequency Band, MHz 890–960 790–890 694–790 2300–2690 1695–2180 1427–1518 2300–2500 2490–2690
Gain, dBi 18.3 18.2
Beamwidth, Horizontal, degrees 60 60
Beamwidth, Horizontal Tolerance, degrees ±3.2 ±5.2
Beamwidth, Vertical, degrees 5.2 5.0
Beamwidth, Vertical Tolerance, degrees ±0.2 ±0.2
USLS (First Lobe), dB 18 19

Electrical Specifications, Service Beam

Frequency Band, MHz 890–960 790–890 694–790 2300–2690 1695–2180 1427–1518 2300–2500 2490–2690
Steered 0° Gain, dBi 21.4 21.4
Steered 0° Beamwidth, Horizontal, degrees 26 25
Steered 0° Horizontal Sidelobe, dB 12 10
Steered 30° Gain, dBi 21.3 20.9
Steered 30° Beamwidth, Horizontal, degrees 28 30

Electrical Specifications, Soft Split

Frequency Band, MHz 890–960 790–890 694–790 2300–2690 1695–2180 1427–1518 2300–2500 2490–2690
Gain, dBi 21 21
Beamwidth, Horizontal, degrees 32 33
Horizontal Sidelobe, dB 21 17

Material Specifications

Radiator Material Low loss circuit board
Reflector Material Aluminum

Mechanical Specifications

Wind Loading at Velocity, frontal 123.4 lbf @ 150 km/h | 549.0 N @ 150 km/h
Wind Loading at Velocity, lateral 183.0 N @ 150 km/h | 41.1 lbf @ 150 km/h
Wind Loading at Velocity, maximum 160.1 lbf @ 150 km/h | 712.0 N @ 150 km/h
Wind Speed, maximum 241 km/h | 149.75 mph

Packaging and Weights

Width, packed 608 mm | 23.937 in
Depth, packed 352 mm | 13.858 in
Length, packed 1682 mm | 66.221 in
Net Weight, without mounting kit 36.5 kg | 80.469 lb
Weight, gross 49 kg | 108.026 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

General Specifications

Antenna Type Sector
Polarization ±45°
Band Multiband
Calibration Connector Interface 4.3-10 Female
Calibration Connector Quantity 1
Color Light gray
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN | Outdoor usage
Radome Material Fiberglass, UV resistant
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 12
RF Connector Quantity, low band 4
RF Connector Quantity, total 16

Remote Electrical Tilt (RET) Information, General

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 male | 2 female

Dimensions

Width 498 mm | 19.606 in
Length 1499 mm | 59.016 in
Depth 197 mm | 7.756 in
Column Spacing 58 mm | 2.283 in

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 694 – 960 MHz | 1427 – 2690 MHz | 2300 – 2690 MHz
Total Input Power, maximum 900 W @ 50 °C

Remote Electrical Tilt (RET) Information, Electrical

Protocol 3GPP/AISG 2.0 (Single RET)
Power Consumption, idle state, maximum 1 W
Power Consumption, normal conditions, maximum 8 W
Input Voltage 10–30 Vdc
Internal RET Low band (2) | High band (3)

Electrical Specifications

R1-R2 R1-R2 R1-R2 Y1-Y2 Y1-Y2 Y1-Y2 Y3 Y3
Frequency Band, MHz 890–960 790–890 694–790 2300–2690 1695–2180 1427–1518 2300–2500 2490–2690
Gain, dBi 13.5 13.4 13.2 18.3 17.1 15.4 16.5 16.5
Beamwidth, Horizontal, degrees 63 66 70 55 73 68 95 94
Beamwidth, Vertical, degrees 13.9 15.3 17 5.2 6.9 8.9 5.3 5
Beam Tilt, degrees 2–16 2–16 2–16 2–12 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 16 22 20 19 17 21 17 19
Front-to-Back Ratio at 180°, dB 26 29 31 31 30 33 34 31
Coupling level, Amp, Antenna port to Cal port, dB 26 26
Coupling level, max Amp Δ, Antenna port to Cal port, dB ±2 ±2
Coupler, max Amp Δ, Antenna port to Cal port, dB 0.9 0.9
Coupler, max Phase Δ, Antenna port to Cal port, degrees 7 7
Isolation, Cross Polarization, dB 27 27 27 25 25 25 25 25
Isolation, Inter-band, dB 27 27 27 25 25 25 20 20
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, maximum, watts 300 300 300 200 250 250 200 200

Electrical Specifications, BASTA

Frequency Band, MHz 890–960 790–890 694–790 2300–2690 1695–2180 1427–1518 2300–2500 2490–2690
Gain by all Beam Tilts, average, dBi 13.2 13.1 12.9 18.0 16.3 15.0 16.0 15.9
Gain by all Beam Tilts Tolerance, dB ±0.4 ±0.5 ±0.4 ±0.5 ±0.8 ±0.5 ±0.6 ±0.9
Gain by Beam Tilt, average, dBi 2 ° | 13.4; 9 ° | 13.3;16 ° | 13.1 2 ° | 13.3; 9 ° | 13.2;16 ° | 12.7 2 ° | 13.0; 9 ° | 12.9;16 ° | 12.7 2 ° | 17.5; 7 ° | 18.1;12 ° | 17.8 2 ° | 16.0; 7 ° | 16.4;12 ° | 16.2 2 ° | 15.0; 7 ° | 15.1;12 ° | 15.0 2 ° | 16.0; 7 ° | 16.1;12 ° | 15.9 2 ° | 15.8; 7 ° | 16.1;12 ° | 15.8
Beamwidth, Horizontal Tolerance, degrees ±5.5 ±5.7 ±8.9 ±4.8 ±9.3 ±5.7 ±13.1 ±10.9
Beamwidth, Vertical Tolerance, degrees ±1.2 ±1.2 ±1.1 ±0.5 ±0.9 ±0.4 ±0.3 ±0.3
USLS, beampeak to 20° above beampeak, dB 16 16 16 17 17
Front-to-Back Total Power at 180° ± 30°, dB 21 21 20 26 25 25 25 24
CPR at Boresight, dB 19 19 20 17 18 20 15 14
CPR at Sector, dB 11 8 12 2 4 4 11 9

Electrical Specifications, Broadcast 65

Frequency Band, MHz 890–960 790–890 694–790 2300–2690 1695–2180 1427–1518 2300–2500 2490–2690
Gain, dBi 18.3 18.2
Beamwidth, Horizontal, degrees 60 60
Beamwidth, Horizontal Tolerance, degrees ±3.2 ±5.2
Beamwidth, Vertical, degrees 5.2 5.0
Beamwidth, Vertical Tolerance, degrees ±0.2 ±0.2
USLS (First Lobe), dB 18 19

Electrical Specifications, Service Beam

Frequency Band, MHz 890–960 790–890 694–790 2300–2690 1695–2180 1427–1518 2300–2500 2490–2690
Steered 0° Gain, dBi 21.4 21.4
Steered 0° Beamwidth, Horizontal, degrees 26 25
Steered 0° Horizontal Sidelobe, dB 12 10
Steered 30° Gain, dBi 21.3 20.9
Steered 30° Beamwidth, Horizontal, degrees 28 30

Electrical Specifications, Soft Split

Frequency Band, MHz 890–960 790–890 694–790 2300–2690 1695–2180 1427–1518 2300–2500 2490–2690
Gain, dBi 21 21
Beamwidth, Horizontal, degrees 32 33
Horizontal Sidelobe, dB 21 17

Material Specifications

Radiator Material Low loss circuit board
Reflector Material Aluminum

Mechanical Specifications

Wind Loading at Velocity, frontal 123.4 lbf @ 150 km/h | 549.0 N @ 150 km/h
Wind Loading at Velocity, lateral 183.0 N @ 150 km/h | 41.1 lbf @ 150 km/h
Wind Loading at Velocity, maximum 160.1 lbf @ 150 km/h | 712.0 N @ 150 km/h
Wind Speed, maximum 241 km/h | 149.75 mph

Packaging and Weights

Width, packed 608 mm | 23.937 in
Depth, packed 352 mm | 13.858 in
Length, packed 1682 mm | 66.221 in
Net Weight, without mounting kit 36.5 kg | 80.469 lb
Weight, gross 49 kg | 108.026 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
Other Ways to Browse

Browse by Application

Browse by Application